Making a Mini Integral Knife by Hand

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 54

  • @Gridlessness
    @Gridlessness Рік тому +2

    Awesome, love the knife AND the video. Maybe we should collaborate on a video sometime!?

    • @BrandtBlacksmithing
      @BrandtBlacksmithing  Рік тому

      Thanks! That would be great!

    • @loivovan6814
      @loivovan6814 Рік тому

      Gridlessness .Tôi đang chờ video, săn bắn từ gia đình bạn . Chúc gia đình bạn thành công..

  • @johnthomas5806
    @johnthomas5806 9 місяців тому

    happy to be back to watch your work develop

  • @enverbozkurt4647
    @enverbozkurt4647 Рік тому +1

    Bıçak yapımı sürecinde verdiğin bilgileri anlamadım ama tahmin etmeye çalıştım.Daha farklı bıçak yapım videolarını bekliyorum.👍🇹🇷

  • @tobski
    @tobski Рік тому +2

    Good job! Greetings from Poland 🔥

  • @outpostcamp
    @outpostcamp Рік тому

    Nice job! Meticulous work for sure. Thanks, from Hells Canyon, Frank.

  • @ibanheadhunter8317
    @ibanheadhunter8317 Рік тому

    Pretty cute and beautifully made knife. And with very little power tools making this much easier for most beginners. I might try making my own someday.

  • @TingTingalingy
    @TingTingalingy Рік тому

    Adorable. You even did museum fit, well done.

  • @pedroval1986
    @pedroval1986 Рік тому

    Nice work, im sure you will become a great blacksmith master... Respects from México.

  • @sporranheid
    @sporranheid Рік тому

    Great looking knife! 👍

  • @Thiswewilldefend
    @Thiswewilldefend Рік тому

    Well done young man!

  • @enverbozkurt4647
    @enverbozkurt4647 Рік тому +1

    Ellerine sağlık çok hoş güzel bir bıçak oldu.Biraz farklı ama iş görür.👏👏👏🇹🇷

  • @tombrown879
    @tombrown879 Рік тому +5

    New subscriber. But Old Bladesmith. Loved this. Nice design. Very well thought out. Very nice camera work and editing. You have a very good understanding of hammer control and fitment techniques. Do you apprentice under anyone? If not, even higher praise to you. Keep up the good work. Tom B. From ND.

  • @MichaelBurnett-bq5xi
    @MichaelBurnett-bq5xi Рік тому +1

    Fantastic work and an excellent video love that you took the time to explain every step of the process. Great job!

  • @craigcook1571
    @craigcook1571 Рік тому

    Good job young man

  • @scottconville9780
    @scottconville9780 Рік тому

    Very sweet little knife!

  • @laurencefranckguilloux1367
    @laurencefranckguilloux1367 Рік тому +1

    Bravo. Tout a la main sans machine. Tres beau travail.

  • @tyee4u
    @tyee4u 10 місяців тому

    I have y done any forge work since junior high many moons ago but I feel like you should be wearing a pair of leather gloves. Haha. Love your work. Keep it up 👍

  • @TheMotownPhilly
    @TheMotownPhilly 6 місяців тому

    Good work, keep it up.

  • @oldworldforgejayvenable1578

    GOOD JOB, IT LOOKED GOOD!

  • @reverendfawkes6138
    @reverendfawkes6138 Рік тому +1

    Great little blade there! My only critique here would be that there should be a mechanical connection of some kind. A 1/16" pin would do the trick nicely.

    • @BrandtBlacksmithing
      @BrandtBlacksmithing  Рік тому +2

      I thought about this, but thought it would be fine for a small knife if I gave the epoxy something good to hold onto. The tang isn't hardened so I could install a pin later if needed. Thanks!

  • @alitoranji4782
    @alitoranji4782 Рік тому

    ایولا خیلی کارت درسته دمتگرم🌟🌟🌟very very cool👌

  • @pjamestx
    @pjamestx Рік тому

    Great job, I think leaving the rough finish on the blade was the way to go, looks fantastic!

  • @noroesteextremo7335
    @noroesteextremo7335 Рік тому

    Awesome buddy

  • @MASI_forging
    @MASI_forging Рік тому

    Bravo my friend. Thí í a great knife. 👍👍

  • @stassapojnikoff4417
    @stassapojnikoff4417 Рік тому

    Молодец! Сделал от души! Беру себе на заметку идею и форму!

  • @lindawallace6750
    @lindawallace6750 Рік тому

    Great job !!

  • @paulpriebe8916
    @paulpriebe8916 Рік тому

    Lovely build, with this you show and prove that one can build great knives without very expensive tooling. Love to see it man!

  • @nico-max
    @nico-max Рік тому

    Hi from France , super super nice 👌

  • @dinoprice1440
    @dinoprice1440 Рік тому +1

    Cool knife I think a 1x 30 belt grinder will help you a lot they're really affordable and you can get so many different belts anyway I love the channel keep making videos😊

    • @BrandtBlacksmithing
      @BrandtBlacksmithing  Рік тому

      Funny you mentioned that. A little while after I finished this knife I actually went and got a
      1 x 30 grinder. It will definitely be used for my future knife builds.
      Thanks!

  • @vajjraushan4330
    @vajjraushan4330 Рік тому

    wow..great man

  • @bdove7939
    @bdove7939 Рік тому

    I like it. That knife will probably last your whole life.

  • @timothyadams1844
    @timothyadams1844 Рік тому

    Not bad sir. 👍👍

  • @curtistaylor5019
    @curtistaylor5019 Рік тому

    Love that knife, and that wood looks great! I’ve got some cool Purple Heart wood left over from a project that you can have if you want to try something different?!

  • @DG__3
    @DG__3 Рік тому

    My first knife making attempt was nowhere near that nice! Great start.

    • @BrandtBlacksmithing
      @BrandtBlacksmithing  Рік тому

      I have made some knives before, but never an integral knife. Thanks!

  • @east.anglian.anglers
    @east.anglian.anglers Рік тому +1

    Your chanel does not get enough attention

  • @enverbozkurt4647
    @enverbozkurt4647 Рік тому +1

    Keşke tüm dünya aynı dili konuşuyor olsa değilmi.☺

  • @nofunclub
    @nofunclub Рік тому

    Subbed
    You could have hot filed to save time
    It's very efficient

  • @Tygor3533
    @Tygor3533 Рік тому

    Good work man

  • @Dopoludny
    @Dopoludny Рік тому

    Молодец парнишка, уже кузнец!!!