Hi Tyler Congratulation you did it ,what was the problem?, the parameter of the controller or another issue? . I only log on once a week for a little while Tyler, for that reason sometimes I don't answer but when I log on I catch up
EDIT: So the issue you're referring to, the skipping, yeah it was the parameters issue. Shortly after though, which I don't think I have updated you on, while that did fix it, I started getting my Y2 servo drive faulting out due to "over heat" (the shop was COLD af and the driver was cool to the touch.) Wellll I kinda didn't fix it. I had thought I did, cause I switched out servo drives (I had an extra from my router build). That new drive worked ALL weekend until I tried engraving something. Exact same issue happened, the new drive faulted out to "overheat". Odd behavior. Same exact settings as Y1 driver. So I think I'm going to swap the entire Nema 34 DMM-Tech servo system to regular AC closed loop stepper motors/drives from Automation Technologies Inc and hold these servos for my PM-940V milling machine I'm about to order before the new year. I have the closed loop stepper system on my 4x8 router and haven't had any issues for the past 4 years so I'll make it work. Servos are more of a headache to be honest, especially with a gantry machine and the need to auto tune 1 motor at a time with the DMM Tech servos.
@@TylerHarney Thank you very much for sharing your experience Tayler 👏👏🥇🥇, that helps us all to know what can happen to us when we build our own machines, I really appreciate it, your designs also help me think of things to implement on my machine, thank you very much for all your tips Tayler, I don't use servos, but if I use them thanks to you, I already know the possible problems I may have. Keep it up, Tayler, as always, congratulations ,have great success with your future creations and have a Merry Christmas.
Hi Tyler Congratulation you did it ,what was the problem?, the parameter of the controller or another issue? . I only log on once a week for a little while Tyler, for that reason sometimes I don't answer but when I log on I catch up
EDIT: So the issue you're referring to, the skipping, yeah it was the parameters issue. Shortly after though, which I don't think I have updated you on, while that did fix it, I started getting my Y2 servo drive faulting out due to "over heat" (the shop was COLD af and the driver was cool to the touch.)
Wellll I kinda didn't fix it. I had thought I did, cause I switched out servo drives (I had an extra from my router build). That new drive worked ALL weekend until I tried engraving something. Exact same issue happened, the new drive faulted out to "overheat". Odd behavior. Same exact settings as Y1 driver. So I think I'm going to swap the entire Nema 34 DMM-Tech servo system to regular AC closed loop stepper motors/drives from Automation Technologies Inc and hold these servos for my PM-940V milling machine I'm about to order before the new year.
I have the closed loop stepper system on my 4x8 router and haven't had any issues for the past 4 years so I'll make it work.
Servos are more of a headache to be honest, especially with a gantry machine and the need to auto tune 1 motor at a time with the DMM Tech servos.
@@TylerHarney Thank you very much for sharing your experience Tayler 👏👏🥇🥇, that helps us all to know what can happen to us when we build our own machines, I really appreciate it, your designs also help me think of things to implement on my machine, thank you very much for all your tips Tayler, I don't use servos, but if I use them thanks to you, I already know the possible problems I may have. Keep it up, Tayler, as always, congratulations ,have great success with your future creations and have a Merry Christmas.
@@Mekaproyects