Earl, your the godfather of Rc’s sorry I was gone for a while. I have the bell hit and I do get notified every upload. I just wanted to tell you I have major respect for what you do. Your amazing my man!🤘🏆👊❤️🍻
I'd really love that one for bashing, but if I'm honest I probably wouldn't run it that often because of repairs being expensive. I think it would take the fun out of it for me. But I really do love watching the vids on it it's a beast of an RC. i have a pal just got one lately so I'll be meeting him soon to see it in the raw. I very much enjoyed your run with it last week with your friend at the track Earl fantastic fun. ❤
I Just remember everyone dogging me about “even if I won I couldn’t afford to fix it” now you proved my point almost a year later but hey better late than never, 😂, happy rcing earl!
Wow that's crazy the amount u put in to fix it , I pulled the pin and ordered the standard xmaxx was kinda pricey $1742 in Canada was off a website so should be decent truck hopefully.....
Earl….i picked up a dbxl 2.0 and love it…..how hard is a kill switch install? I absolutely love this rig, runs like a champ. Never had any issues of it starting….but I do hear a run away is a concern.
This is why I haven't bought a 5th scale Arrma yet. Don't get me wrong the 6S will break just as much. But the money spent on initial investment is just not worth it to me. Unless I build a fully built 8S. In which case it's still a massive investment. In fact I wouldn't even buy a roller. I'd just start with an M2C chassis and build from there.
@@earlmoorhead5555 it could be a little of both . I own a xmaxx as well. I usually jump my rc's pretty high but I also stick to landing in grass , to soften the landing
My Arrmas tend to break stock chassis more often than Traxxas after backflip jumps, even on good landings. Especially the 4S Outcast and 4S Kraton. Cha-ching $. I like both companies, but in my experiences.
@@favulus1he knows exactly who they are. Along with other multiple companies that make higher end chassis and other upgrades. He’s just playing dumb 😂.
Hey Eral im wondering is it very difficult to get into the line of work you do? Do you need an agent or do you go and ask studios? Or do you do your own publicity?
With the chassis damage you should have just went m2c there not that much more than replacing a stock chassis I think the 6s chassis is $100 stock and the m2c one is one $140 or so at that price point m2c is the way to go
So basically you are saying this truck is not worth getting from a durablity stand point ? I have my xmaxx I love it and I can’t help but want this or a Kraton 8s is this the case should I stay away from it ?
It’s a great rc just need to be aware that trying to jump it high will result in major cost even tho I feel the repairs are normal the cost exceeds a replacement rc car
@@TMIVRCyeah mine takes that all day long. And it's not even the exb. But bad landings will bend a drive shaft from that point. I've had to buy a lot of those @ $20 each. Should have bought the 4 pack from Jenny's for $60 a couple times now but still haven't learned my lesson
Translation: Crashing constantly and nose-diving into hard surfaces will cost you when driving an Arrma. INDIVIDUAL skill level matters when ripping these bigger Rc's. Pivot ball socket joints are very difficult to ruin, and you managed to do so. Scam artists like M2C dont even make those LOL.
You sure got chewed up at work, must have had your arms into a real awkward spot. I used to hate jobs like that but sometimes you have to do what you have to do to get it done.
@@earlmoorhead5555didn't know you were a mechanic. Usually people who wrench for a living dont love doing it outside of work. Can tell you are mechanically inclined and truly enjoy it.
1/5th scale was never for everyone, if you want to keep it reasonably priced keep it 1/8th or 1/10th scale. It’s insane what 1/5th costs, RPM arms for a Outcast 8S is almost as expensive as a Granite Grom.
@@feki122 yeah it’s crazy . I don’t have any 1/5 scales , but my rustlers and typhons are bad enough. When I get tired of my bashers I take out my trail trucks , they cost to upgrade but at least I’m not forced to do repairs all the time
1/5 has served us well … the last one gave up recently .. truely driver error broke the steering bell cra - ( side note ) both my kids beat the crapp..!! Out of all rc’s .. but this one always stood high ..! On call -- 📞raise the two hands wheeliee’s dusts n rippss sayn m all’right whats up .. My favourt😎 excites us puts a smile everytime .. thats all matter .. love your videossss✌️
Jenny rc prices seem good till they add every part you order with a handling charge put everything in one box but charge as it’s all shipping separately 🤷🏻♂️
Earl, your the godfather of Rc’s sorry I was gone for a while. I have the bell hit and I do get notified every upload. I just wanted to tell you I have major respect for what you do. Your amazing my man!🤘🏆👊❤️🍻
Appreciate it 💯
Thanks! Thank you Earl finally something real to watch 💪👊👍🔥
Thanks for all your support 💯👌
Bet you didn't have to "REFRESH" that slick looking front bumper shock absorber looking thing 👌😜👍💯
Nope bright as ever
I'd really love that one for bashing, but if I'm honest I probably wouldn't run it that often because of repairs being expensive. I think it would take the fun out of it for me. But I really do love watching the vids on it it's a beast of an RC. i have a pal just got one lately so I'll be meeting him soon to see it in the raw. I very much enjoyed your run with it last week with your friend at the track Earl fantastic fun. ❤
I Just remember everyone dogging me about “even if I won I couldn’t afford to fix it” now you proved my point almost a year later but hey better late than never, 😂, happy rcing earl!
Work work work. It never ends
Should of bought the newest Version of the 8s! Crazy 🤪
Nice job Earl. Waiting on parts is no fun but it should be nice when it's back up and bashing.
Wow that's crazy the amount u put in to fix it , I pulled the pin and ordered the standard xmaxx was kinda pricey $1742 in Canada was off a website so should be decent truck hopefully.....
Nice new intro!
My son made it though it was cool 😎
Great video, a lot of helpful information. greetings Earl.
Love the new intro
Those are some seriously expensive repair bills.
Earl….i picked up a dbxl 2.0 and love it…..how hard is a kill switch install? I absolutely love this rig, runs like a champ. Never had any issues of it starting….but I do hear a run away is a concern.
I show the installation of the kill switch on two of them there not bad programming the remote was the hardest part
Arrma saves you money upfront, but Traxxas saves you money in the long run. Great vid as always Earl.
This is why I haven't bought a 5th scale Arrma yet. Don't get me wrong the 6S will break just as much. But the money spent on initial investment is just not worth it to me. Unless I build a fully built 8S. In which case it's still a massive investment. In fact I wouldn't even buy a roller. I'd just start with an M2C chassis and build from there.
My exb outcast takes a beating . Everyone’s luck is different.
Luck ? Or skill level that why I choose to show it with the xmaxx same drive and same location with the same skilled operator 🙃
@@earlmoorhead5555 it could be a little of both . I own a xmaxx as well. I usually jump my rc's pretty high but I also stick to landing in grass , to soften the landing
850.oo! That is some B.S. FOR SURE! Dude get a damn Traxxas their soooo much tougher.
My Arrmas tend to break stock chassis more often than Traxxas after backflip jumps, even on good landings. Especially the 4S Outcast and 4S Kraton. Cha-ching $. I like both companies, but in my experiences.
looks like you should have ordered stuff from M2C
Don’t know MRC 🤷🏻♂️
@@earlmoorhead5555 mrc sells the upgraded stuff for arrma. High quality stuff that's so much better than arrmas replacement parts.
Look them up don't buy any more arrma parts from arrma
@@favulus1he knows exactly who they are. Along with other multiple companies that make higher end chassis and other upgrades. He’s just playing dumb 😂.
But ARRMA looks so much cooler and rugged
😎💯💯💯
Hey Eral im wondering is it very difficult to get into the line of work you do? Do you need an agent or do you go and ask studios? Or do you do your own publicity?
Right now it’s impossible but the local union for 399 in North Hollywood teamsters is where you add your name
@@earlmoorhead5555 thank you for the info Earl, much appreciated.
With the chassis damage you should have just went m2c there not that much more than replacing a stock chassis I think the 6s chassis is $100 stock and the m2c one is one $140 or so at that price point m2c is the way to go
I’ve showed the damages the m2c chassis does to the rc its way to heavy and will break arms every bad landing
So basically you are saying this truck is not worth getting from a durablity stand point ? I have my xmaxx I love it and I can’t help but want this or a Kraton 8s is this the case should I stay away from it ?
It’s a great rc just need to be aware that trying to jump it high will result in major cost even tho I feel the repairs are normal the cost exceeds a replacement rc car
@@earlmoorhead5555 that’s fair I only plan on going 10-15 feet at most should it handle that good landings ?
@@TMIVRCyeah mine takes that all day long. And it's not even the exb. But bad landings will bend a drive shaft from that point. I've had to buy a lot of those @ $20 each. Should have bought the 4 pack from Jenny's for $60 a couple times now but still haven't learned my lesson
Well I went ahead and got it lol
@@TMIVRC hell yeah! Enjoy the hell out of it man!
What vehicle bit you this time???
Cadillac dashboard 🙃
@@earlmoorhead5555 😳🥓
Translation: Crashing constantly and nose-diving into hard surfaces will cost you when driving an Arrma. INDIVIDUAL skill level matters when ripping these bigger Rc's. Pivot ball socket joints are very difficult to ruin, and you managed to do so. Scam artists like M2C dont even make those LOL.
You sure got chewed up at work, must have had your arms into a real awkward spot. I used to hate jobs like that but sometimes you have to do what you have to do to get it done.
Yes dash work sucks to many sharp unfinished pieces behind a dashboard
@@earlmoorhead5555 Yup that will do it. Detailing my motorcycles is another one that gets me everytime for the same reason.
@@earlmoorhead5555didn't know you were a mechanic. Usually people who wrench for a living dont love doing it outside of work. Can tell you are mechanically inclined and truly enjoy it.
@DeejayPozE definitely fun to modify things rather then daily maintenance work
Wow, that’s a rich man’s RC. Go broke fixing the stupid thing.
Definitely not an affordable rc for repairs and xmaxx is way cheaper for a daily rc
1/5th scale was never for everyone, if you want to keep it reasonably priced keep it 1/8th or 1/10th scale. It’s insane what 1/5th costs, RPM arms for a Outcast 8S is almost as expensive as a Granite Grom.
@@feki122 yeah it’s crazy . I don’t have any 1/5 scales , but my rustlers and typhons are bad enough. When I get tired of my bashers I take out my trail trucks , they cost to upgrade but at least I’m not forced to do repairs all the time
@@feki122 that’s why the new 1/5th scale redcat doing so well parts are reasonably priced 💯👍
1/5 has served us well … the last one gave up recently .. truely driver error broke the steering bell cra - ( side note ) both my kids beat the crapp..!! Out of all rc’s .. but this one always stood high ..! On call -- 📞raise the two hands wheeliee’s dusts n rippss sayn m all’right whats up .. My favourt😎 excites us puts a smile everytime .. thats all matter .. love your videossss✌️
Jennysrc will save you a ton of money on parts....they break down new cars and part them out and their prices are way cheaper
Jenny rc prices seem good till they add every part you order with a handling charge put everything in one box but charge as it’s all shipping separately 🤷🏻♂️
@@earlmoorhead5555this is why I just buy all my parts off Amazon
Already have prime and gotta love when you can do the free next day shipping