Here is the Link to the spoiler!! Thanks for watching guys!! Much love🙏🏽 www.ebay.com/itm/Glossy-Black-GT500-GT350-Style-Trunk-Spoiler-Wing-For-S550-15-2020-Ford-Mustang-/193281312696?_trksid=p2349624.m46890.l49292
Tip: to keep the bolts under the hood from falling off the socket, put a piece of black electrical tape over the socket opening - adhesive side facing out. Another option is to put a strong neodymium magnet on the extension as close to the socket as possible - or do both. Spoiler looks great BTW
Simple procedures but important to be thorough. Great job showing the install. Nice n clean aesthetics on his mustang. Looking forward to see what ya'll both do to your new pony's.
I dropped one of the nuts when I replaced my stock spoiler on my 2016 GT years ago 😂🤣 Once in a while when I open the trunk I hear it rolling around in there.
Idk if you'll even see this comment as old as this video is but I use a 3m eraser wheel for the more difficult adhesives. Doesn't hurt my paint at all and makes a 20+ minute job into literally like less than 5 minutes. Just gotta make sure to wax or polish and wax afterwards.
@@ItalianStallion410 Yeah man of course! I'm sure your phone stays blown up with your popularity and I know most youtubers don't worry with older videos lol but I thought I'd leave this here just in case. It saves me a bunch of time and energy with the eraser wheel
From s197s to the new s550, the gt500 and gt350 spoilers should be one of the first visual mods on a gt. Def keeping my eye out on build videos on these 2 cars!
When it comes to parts like that spoiler,side skirts, chin splitters, lips etc I don’t mind getting off brand shit lol why am I gunna pay 400 plus for something when I can get the same exact visual look for 100-200.....when it comes to mechanical parts and so on that’s a different story.
How are the sides holding up, with the single bolt? Any lifting? I noticed there are 3 holes... 2 extra bolts. I just bought this spoiler and my trunk is a virgin (needs to be drilled).
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
If you get this wing get it from dawn enterprises bc it looks more oem I had this exact one from eBay and sold for the oem when I seen how much it different the oem looks on this gt360 I seen at my local Ford dealer.
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
We’ll crap. I dropped a screw inside the trunk. Any tips on how to get it out??? Already installed came out clean but yeah I need to get the screw out.
Quick question, when looking at the ebay description it says that it doesn’t use factory holes and that I’d have to drill new ones. But you guys didn’t drill holes into yours. I got a 2015 mustang GT and am curious
Yeah I am not sure that’s weird we didn’t drill any holes Colin’s car came with a spoiler from the factory and it already had all the holes we needed to install this spoiler unless the 2015 models had different spots for the holes on the truck
Looks good dude. I see that lift in the background and was wondering what kind of lift that was and how tall is that ceiling? About to build a garage and would love to put a lift in it.
@@ItalianStallion410 still totally enjoyed the video. I’m just in the market for a ‘22 gt (almost got the mach1) but then saw your whip with the gt500 spoiler and figured why spend the extra 20k? Im diggin your videos bro. Cheers
@@ItalianStallion410 I don’t think Ford is even selling yet. The tell tale is the missing holes for the gurney flap. Personally I would go with the Anderson composite one. Yes it’s $1600 for the spoiler and gurney but you gotta pay to have perfection. lol.
@@ItalianStallion410 no not that. On the rear of the “GT500 spoiler” are like 4 holes they are plugged when not getting the handling pack. When you get the handling pack a gurney flap snaps in. Tell tale it’s not a legit spoiler. I believe some cheaper ones still have. Not sure though. Anderson definitely does.
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
Those “pins” on the factory spoiler are locator pins to help line it up in the factory. Just a tasty tid bit for your mind to munch on 😉 Keep up the great content brotha
Here is the Link to the spoiler!!
Thanks for watching guys!! Much love🙏🏽
www.ebay.com/itm/Glossy-Black-GT500-GT350-Style-Trunk-Spoiler-Wing-For-S550-15-2020-Ford-Mustang-/193281312696?_trksid=p2349624.m46890.l49292
Tip: to keep the bolts under the hood from falling off the socket, put a piece of black electrical tape over the socket opening - adhesive side facing out. Another option is to put a strong neodymium magnet on the extension as close to the socket as possible - or do both. Spoiler looks great BTW
Thanks for the tip!! And thank you!!
Simple procedures but important to be thorough. Great job showing the install. Nice n clean aesthetics on his mustang. Looking forward to see what ya'll both do to your new pony's.
Nothing like getting new mods
Facts!!
Looks good, love the color combo. I might be in the market for a white GT in the future.
That GT500 spoiler looks so much better!! Changed the look of the car completely. Beautiful car!🔥🔥👌🏽
Thank you!!
I dropped one of the nuts when I replaced my stock spoiler on my 2016 GT years ago 😂🤣 Once in a while when I open the trunk I hear it rolling around in there.
😂😂😂
Use a powerful magnet to get it out
@@chrisbowman3907 if it bugged me I would but it honestly does not bug me at all so I could care less lol
Idk if you'll even see this comment as old as this video is but I use a 3m eraser wheel for the more difficult adhesives. Doesn't hurt my paint at all and makes a 20+ minute job into literally like less than 5 minutes. Just gotta make sure to wax or polish and wax afterwards.
Thanks for the info bro sometimes youtube won’t give me the notifications but I try and look all the time
@@ItalianStallion410 Yeah man of course! I'm sure your phone stays blown up with your popularity and I know most youtubers don't worry with older videos lol but I thought I'd leave this here just in case. It saves me a bunch of time and energy with the eraser wheel
@@unknownbeast2133 I’m not like other youtubers I will always try and respond to everyone as fast as I can! I really appreciate everyone’s support
From s197s to the new s550, the gt500 and gt350 spoilers should be one of the first visual mods on a gt. Def keeping my eye out on build videos on these 2 cars!
Tip: get an eraser wheel for your drill rather than going Mr. Clean on your decklid.
When it comes to parts like that spoiler,side skirts, chin splitters, lips etc I don’t mind getting off brand shit lol why am I gunna pay 400 plus for something when I can get the same exact visual look for 100-200.....when it comes to mechanical parts and so on that’s a different story.
I agree on that!
@Rodolfo Figueroa bro nobody wants a ecoboost mustang 🤣🤣 ecoboost is junk
@Rodolfo Figueroa lol
@Rodolfo Figueroa they bash ecoboost cause they’re slow 🤡 have fun with your ecobeast man!
@Rodolfo Figueroa lmaoo u own an ecoboost
Looks amazing!!! Thanks for shoiwing us this. Great work!! 🔥🔥🔥
Anytime
Don’t matter if it’s fake, still dope asf
It is!!
Welcome back to the mustang world bro
Looks so much better!👍
It looks pretty good dude! He’s modifying quick
Did you try to cover the unused bolt holes. Will water seep through?
Yeah we did
the swing is dope. if i wasn't spoilerless i'd be down for some of that.
That gt500 spoiler looks badass dude 👍
Studs..........no, not you guys....those "pointy" things you don't have a name for.
😋Nice install.
How has that eBay Gt500 trunk spoiler holding up?
Been good Colin had zero complaints
Looks good bro love the spoiler
Thank you!
How are the sides holding up, with the single bolt? Any lifting? I noticed there are 3 holes... 2 extra bolts. I just bought this spoiler and my trunk is a virgin (needs to be drilled).
Yeah if your car didn’t come with a spoiler you need to drill holes or buy a trunk that’s already drilled
Great looking spoiler..........and a great "how to" video. Need some better shots of the wheels.......what make/spec are they? They look great too!
Not sure exactly on the spec of the wheels colin didn’t tell me I will let you know in one of my next videos and thank you!!!
That's it.. I'm buying an eBay spoiler now. Looks good!
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
Man love the mustangs. But that GTR is my dream car!
The GTR is one of my favorite cars too
I want to get a carbon fiber wing of that type of wing
That would be sick!
If you get this wing get it from dawn enterprises bc it looks more oem I had this exact one from eBay and sold for the oem when I seen how much it different the oem looks on this gt360 I seen at my local Ford dealer.
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
We’ll crap. I dropped a screw inside the trunk. Any tips on how to get it out??? Already installed came out clean but yeah I need to get the screw out.
Try and use a magnet
Love the gt500 spoiler!
Thank you !!!
They 10s but they clean😂😂 favorite movie🤣
Facts 😂
American Muscle says that this spoiler wont cover the gt spoiler holes. Do you know what they are talking about ?
Not sure cause it did and it fit perfect
What wheels did he get. I’m looking for wheels for my new 2021, those look awesome
Gt500 rep wheels
Quick question, when looking at the ebay description it says that it doesn’t use factory holes and that I’d have to drill new ones. But you guys didn’t drill holes into yours. I got a 2015 mustang GT and am curious
Yeah I am not sure that’s weird we didn’t drill any holes Colin’s car came with a spoiler from the factory and it already had all the holes we needed to install this spoiler unless the 2015 models had different spots for the holes on the truck
This is much better bro
🙏🏽
i just did mine yesterday. i definitely should have used more goo gone
Wd40 works even better
I just ordered one thank you 🙏
Looks great !
Thanks for the video I got the #FordPerformance version direct bolt on with gurney flap should hold better value in the long run.
That would be better thanks for watching
The factory has the metal dowel pins as well for high speed the others are basically for looks
It looks really good!
Mines didn’t line up with holes from spolier
Damn really
@@ItalianStallion410 yes bout stang from a dealer had a spolier delete on it I drilled my own holes for my spoiler I bout on eBay
@@TruckerMike88 yeah might have better to buy a OEM one cause they have the pins for the holes to line up
@@ItalianStallion410 I was thinking bout buying another one from LMR it comes with a template
Question how did you bolt spoiler down did u have your own screws? Mine came with no screws just tape thx
Colin’s came with the hardware I am pretty sure everything came in the pack call the company maybe they forgot to send them
@@ItalianStallion410 cool thx a bunch I'll just go buy some I appreciate it.
@@6ft3soldier anytime!!
can i do this on my 2016 mustang gt premium package? I dont want to drill into my car.
If you have a spoiler already you shouldn’t have to
Does this spoiler require any drilling? I know some do
If you don’t have the factory than yes
Looks awesome
Do you have the link and you think it would fit a 2022 gt mugstan?
Yes link is on the comments and it will fit a 22 gt is you have the factory trunk holes
Looks good dude. I see that lift in the background and was wondering what kind of lift that was and how tall is that ceiling? About to build a garage and would love to put a lift in it.
Atlas lift and 12ft ceilings
@@ItalianStallion410 awesome thank man.
It would be nice to see it outside of the garage....photoshoot.
Planning one soon!!
Looks good !! 👊
any drilling?
No stock holes
Do you have a link to this one? I see there’s a few out there.
Yes I put it in the comments
Question how heavy is the spoiler?
It was really light not heavy at all maybe 1 pound
Looks amazing. I thought it would have cost $500.
It does, this one is not the carbon fiber
@@AlbertoGonzalez-qq2iw oh ok
what size socket you use ?
You guys should have stood back and let us seen the different angles of it. Looks sick tho 💪
Yeah we should have but thank you
@@ItalianStallion410 still totally enjoyed the video. I’m just in the market for a ‘22 gt (almost got the mach1) but then saw your whip with the gt500 spoiler and figured why spend the extra 20k? Im diggin your videos bro. Cheers
Great video bro👍🏽
Can I have the old Spoiler? 🤔
He’s selling it on Facebook
@@ItalianStallion410 I'd like to buy it
What kind of crush washer do you use for the 2 center bolts??
Just what ever we could find lol
@@ItalianStallion410 LOL... any size in specific? I think was a 10mm right?
@@sergiorosichannel yeah it was for 10mm if I remember correctly
Link to the spoiler ?
It’s in the comments
Is there any drilling included for the installation brother? 🙏
No it uses the factory holes!
@@ItalianStallion410 wow! That’s good to hear. Thank you so much 🙏🙏
@@Spencer50 anytime bro
Looks good 👍🏽
Thank you!
Very nice
That looks great...🤔🤔🤔👍🏿
Nice Mach 1 spoiler!
This isn’t the Mach 1 spoiler
@@BigDasher1 The new Mach 1 and GT500 share a spoiler
@@The1Monty ik but its still a gt500 spoiler lol but now it comes with the gt350
@@BigDasher1 Lol they’re the exact same thing, it doesn’t matter if I call it a Mach 1 spoiler or a GT500 spoiler, but alright bro.
I just got mine but it didn't come with those 3m tape templates, anyone know where I can get those?
Prolly just any hardware store even Walmart
@@ItalianStallion410 your spoiler had the 3m tape cut to size though
@@MrRyanzbt yeah it came with a little bit on it that’s weird idk why yours didn’t come with tape
Can I just use adhesive
Yeah as long as you bolt it down good in factory holes
@@ItalianStallion410 nah I don’t want to drill holes
@@ItalianStallion410 I have a 2014
🔥🔥🔥
Link to his spoiler on eBay?
It’s in the comments
@@ItalianStallion410 oh my bad man, thanks!
They have this spoiler on Amazon for $97 right now. Spec d
Damn really that doesn’t suprise me Amazon has everything
I can’t do it. I only put high quality parts on the mustang and most only companies Ford associates with from the blower down to the mods.
Yeah I do to but they are a huge difference in price.
@@ItalianStallion410 I don’t think Ford is even selling yet. The tell tale is the missing holes for the gurney flap. Personally I would go with the Anderson composite one. Yes it’s $1600 for the spoiler and gurney but you gotta pay to have perfection. lol.
@@TheCdM1981 I think those holes where for the other years of the s550 if they came with a different spoiler. And yeah that’s a lot for a spoiler
@@ItalianStallion410 no not that. On the rear of the “GT500 spoiler” are like 4 holes they are plugged when not getting the handling pack. When you get the handling pack a gurney flap snaps in. Tell tale it’s not a legit spoiler. I believe some cheaper ones still have. Not sure though. Anderson definitely does.
Dawn Enterprises MUS15-PED Factory Style Pedestal Spoiler Compatible with Ford Mustang - Black (UA) www.amazon.com/dp/B01N701XRH/ref=cm_sw_r_cp_api_glc_fabc_-Pt2FbSGJQGY5
Can you ship the factory spoiler to me? 😎
Hit up colin for that!
That looks great but homie gotta step up your mod game lol jk but whats next on yours
All the parts I ordered are on back order😭
@@ItalianStallion410 yikes man lol
That looks too good! You gotta ceramic coat your car! I did it myself and it’s worth it and pretty easy
I have a guy that does it for me!!
Those “pins” on the factory spoiler are locator pins to help line it up in the factory. Just a tasty tid bit for your mind to munch on 😉
Keep up the great content brotha
Thanks bro
Tell Mr. Piggy to start a channel lol I’d drop a follow
Just get A 350
Use WD40 next time it is faster
I honestly thought of that I wish I tried it thanks for the tip tho!!
Looks good!