Good teacher. This device has been sitting idle in my rack for several years for want of knowledge as to how to use it until I chanced upon this video. More grease to your elbow.
Cheers Carl, I'm really glad you are finding them useful. I'm no expert by any stretch of the imagination. Hope to hear you on 80 at some stage. 73 old boy.
Hi buddy. I just got Ultra gain preamp, Virtulizer Pro, MDX 2200 processor and 32 ban graph equalizer for the ham radio. now in what order after the mic you think equipmant should go I am testing now with pream first for sure then virtulizer and processor an EQ at the end. Thanks Branko YU5KBM
how to connect feedback destroy to eq, compressor..1.mixer to eq to compressor to feedback destroy to amplifier. 2.mixer to feedback destroy to eq to compressor to amplifier .which is appropriate
Hi George. What freq on the 1124 are you running with the 7300? I’ve messed around with several but have a weird spike at 2k. Care to share so I can get an idea ?
Hi there, the best advice is to go to N(UN's site and start with the baseline settings he lays out and go from there. Pointless me giving you my settings. You gotta play with it I'm afraid, it's the only way to nail it down.
i would get a recording into a flat receiver (not equalized) actual over the air from a friend. I have a video here : ua-cam.com/video/qczjEtv6fso/v-deo.html&ab_channel=GeorgeDonaldsonEI7KO
I've just purchased a used one on ebay and looking for some information. I run a mobile disco and do occasional karaoke so it's purely for feedback removal although, I found your video very interesting and helpful in understanding the parametric principles. I'm most curious as to how and why a ham radio user would use it. Is it purely to make your voice sound fuller? Thanks for posting.
@@GeorgeEI7KO i saw your rig in your vlog that is why i know, i am also inactive ham in my country, from phils, but i was long time ago inactive, i've just saw your vlog and looks great, we share same passion, i am now into sound system too. 73's bro keep up the good work.
Good teacher. This device has been sitting idle in my rack for several years for want of knowledge as to how to use it until I chanced upon this video. More grease to your elbow.
You say boost and cut As if turning the volume up-and-down.
I say sharpen and flatten. As If we were speaking about tone. B#
It's all good man. We're all different.
Good video. I just bought one for 30 bucks Canadian funds. Cant wait to get my rack stuff setup
Good luck!
@@GeorgeEI7KO do you make up your own jumpers for the rack gear? And do you use all xlr? Thanks!
@@user-su5sq5ib3i I do, and I used all TRS
@@GeorgeEI7KO thanks!!
You are the best my friend, awesomeness
really clear explanation, thank you!!
Glad it was helpful!
Thanks again George for putting up the video,
All the best regards, Carl,G0lka. Catch you on 80 sometime soon 73.
Cheers Carl, I'm really glad you are finding them useful. I'm no expert by any stretch of the imagination. Hope to hear you on 80 at some stage. 73 old boy.
Is there a way to set up just auto switch on and forget it
Just got one , how do you set it to automatically suppress any feedback on monitors or FOH ( manual isnt totally clear to me ) , thanks
Lovely
Nice videos…learning a lot. Let me ask, what kind of pen are you using ? Looks very smooth. Thanks for the videos. Cheers..
nothing fancy. Just a ball point if i remember right
Hey, nice video, but one question: What is the range of the gain regulator in parametric eq mode?
+16dB to -48dB
Hello George, In the processing is both the 15 band eq needed and dsp 1124p?. Since they are both equalizer please advise
In my case i only use the 1124 as EQ as it is fully parametric
Hi buddy. I just got Ultra gain preamp, Virtulizer Pro, MDX 2200 processor and 32 ban graph equalizer for the ham radio. now in what order after the mic you think equipmant should go I am testing now with pream first for sure then virtulizer and processor an EQ at the end. Thanks Branko YU5KBM
If you chaeck out the NU9N website and study the 'TX Setup' Section, This will help you.
how to connect feedback destroy to eq, compressor..1.mixer to eq to compressor to feedback destroy to amplifier.
2.mixer to feedback destroy to eq to compressor to amplifier .which is appropriate
I know how to connect them.
how
Oh you were asking me how...?
Send me an email. Irishcustomradios@gmail.com
@@GeorgeEI7KO yes sir...
Hi George. What freq on the 1124 are you running with the 7300? I’ve messed around with several but have a weird spike at 2k. Care to share so I can get an idea ?
Hi there, the best advice is to go to N(UN's site and start with the baseline settings he lays out and go from there. Pointless me giving you my settings. You gotta play with it I'm afraid, it's the only way to nail it down.
George EI7KO yeah already been that route
@@JayN4GO takes time I'm afraid.
How do you get the best transparent representation of your outgoing audio? Thanks George
i would get a recording into a flat receiver (not equalized) actual over the air from a friend. I have a video here : ua-cam.com/video/qczjEtv6fso/v-deo.html&ab_channel=GeorgeDonaldsonEI7KO
I've just purchased a used one on ebay and looking for some information. I run a mobile disco and do occasional karaoke so it's purely for feedback removal although, I found your video very interesting and helpful in understanding the parametric principles. I'm most curious as to how and why a ham radio user would use it. Is it purely to make your voice sound fuller? Thanks for posting.
We have a very restricted bandwidth. The object of the exercise is to make 3khz sound like its 12khz wide if you follow. Hi fidelity.
only thing missing is a pint
Ham Bone don't drink mate
1124 or fb1000?? Different or no??
no clue man. i only have the 1124
uma pena não ser em potugues.....tendi quase nada
Sinto muito, meu amigo, mas infelizmente não falo português.
pois eh....bom o video
so you are also a ham.
Yes I am. My Callsign is EI7KO
@@GeorgeEI7KO i saw your rig in your vlog that is why i know, i am also inactive ham in my country, from phils, but i was long time ago inactive, i've just saw your vlog and looks great, we share same passion, i am now into sound system too. 73's bro keep up the good work.