i have mine 450 exc 2008 and planning to convert it to supermoto. rim set available in my country are 3.5 front and 4.25 rear. whats d tire size for this setup and i want a highspeed sprocket set. please inlighten me
Great vid.. very thorough, I see that you also have a DRz400 SM, quick question if you had to choose between the Suzuki and the Honda, which one would you recommend,? I'm on the market for a supermoto bike and I'm down to these two thanks... a lot
Thanks for the feedback and I’m glad to help! This is a passion of mine. I’ve got close to 7k miles on the CRF now and still running like new. If cost isn’t an issue I would say go with the Honda. Comparing the two bikes they’re both very reliable and fun bikes to ride. But with the Honda having efi and weight/ power advantages- it takes the cake.
@Diddly’s Customs I am thinking of buying a new CRF300L for my daily commute to work. How many miles can this bike go on for before it gives up? Or do I just rebuild it like a regular dirt bike?
So I hit like and subscribe bc you covered everything I wanted to know but i have one question…where did you get that seat from? The stock seat has me stopping to take breaks its so hard lol
I didn't measure when I did my conversion. But going from the stock wheels to the supermoto wheels made me go from standing on my toes with both feet down to being able to flat foot on both sides. I'd guess it dropped the seat an inch or two.
I had same plans of quick swapping street to dirt until I put that front caliper on 🤣 What tune position do you run on vortex and do you have lid on air box?
Sick bike, I just got a 2022 but thinking about keeping the bigger rims and just putting street tires on the bigger rims since I’m a bigger guy and want to keep it at the height it is at now. Should I change the sprocket for better wheelies ? I can power wheelie in 2nd and pull up hard to get it up in 3rd. The vortex ecu is coming this winter and so is the yoshi, I kno it helps tremendously but I’m wondering if a sprocket change should be done too ?
Hey 👋🏼!! I got seme bike 🏍 I put sm wheels and now my speedometer is not working!!! He's not reading the miles. I think I need that. What do you have? Where did you buy it?
@@DIDDLYWAYNE Thank you very much! I will look up if its also offered in Germany. I got another question. Can you tell me what rim size you are driving in the rear. I am wondering if a 5 Inch rim would fit in there? Big thanks!
How many miles did you have on the bike when you got the slider replaced? You're talking about the one on the top of the swingarm near the front sprocket correct?
Drz is a solid bike for the money. Comparing it to the Honda really isn’t fair because they are almost not comparable. For the price of the 450 you’re getting an aluminum frame, which yields a lighter bike. A “performance engine” 6 speed transmission, fuel injection, good suspension (same as the race models just valved softer) drz is stuck in the Stone Age with a steel frame, carbureted engine, and 5 speed. But also way more affordable. So depending on what you want as a rider would decide what you want- you want an expensive fast street legal reliable dirt bike- go Honda. If you just want something to ride on the street with the same reliability but slower? Go drz
Do you happen to know about how much your seat height lowered with the SM setup? Maybe 1.25” or so? Wondering if the wife will be more confident on it after the swap. She isn’t even flat footed on a Grom haha.
Can you put the list of parts in the description?
Beautiful suzuki drz that's a real supermoto, congratulations bro 🎉🎉
LOVE MY 2016 KTM 500EXC SIX DAYS EDITION ,SUPERMOTO , FMF FULL EXHAUST ,NUMBER #7
i have mine 450 exc 2008 and planning to convert it to supermoto. rim set available in my country are 3.5 front and 4.25 rear. whats d tire size for this setup and i want a highspeed sprocket set. please inlighten me
Great vid.. very thorough, I see that you also have a DRz400 SM, quick question if you had to choose between the Suzuki and the Honda, which one would you recommend,? I'm on the market for a supermoto bike and I'm down to these two thanks... a lot
Thanks for the feedback and I’m glad to help! This is a passion of mine. I’ve got close to 7k miles on the CRF now and still running like new. If cost isn’t an issue I would say go with the Honda. Comparing the two bikes they’re both very reliable and fun bikes to ride. But with the Honda having efi and weight/ power advantages- it takes the cake.
@Diddly’s Customs I am thinking of buying a new CRF300L for my daily commute to work. How many miles can this bike go on for before it gives up? Or do I just rebuild it like a regular dirt bike?
So I hit like and subscribe bc you covered everything I wanted to know but i have one question…where did you get that seat from? The stock seat has me stopping to take breaks its so hard lol
I bought the seat from seatconcepts.com comfort tall.
out of curiosity when you changed to the 17" wheels how much did that drop the seat height?
I didn't measure when I did my conversion. But going from the stock wheels to the supermoto wheels made me go from standing on my toes with both feet down to being able to flat foot on both sides. I'd guess it dropped the seat an inch or two.
@@vertvlogs675 How tall are you though?
@@Irfan87 5'8" but I think I have slightly longer legs than normal. I usually buy jeans with a 32" inseam.
So what about when you want to go dirt biking on the weekend is everything able to switch over quickly or how does that work
Nice clean bike. Very nice 👌
Thanks man!
Huihuihui !
You are really a lucky guy
Amazing .👏🏽👏🏽👏🏽
You should do a video drz vs 450l it would definitely get views and boost your channel
Esa DRZ 😍😍
I had same plans of quick swapping street to dirt until I put that front caliper on 🤣
What tune position do you run on vortex and do you have lid on air box?
I run it on map 1 and then all 5s air box lid off
So can’t be swapped back and forth quickly? That would be pointless no?
Sick bike, I just got a 2022 but thinking about keeping the bigger rims and just putting street tires on the bigger rims since I’m a bigger guy and want to keep it at the height it is at now. Should I change the sprocket for better wheelies ? I can power wheelie in 2nd and pull up hard to get it up in 3rd. The vortex ecu is coming this winter and so is the yoshi, I kno it helps tremendously but I’m wondering if a sprocket change should be done too ?
If you plan on keeping the stock wheels I recommend a 49 tooth rear sprocket!
@@DIDDLYWAYNE thanks bro I will look into that
I have a 22 also. I’m trying to understand what you mean by bigger rims. The stock rims that come on them?
@@millamazing9176 yes
Nice! What cam is in it?
All stock motor
You have a very nice bike. May i ask what is the size of your front & rear rim, and also the tire size. Thanks and ride safe!
Thanks! The specs on the wheels are mentioned in the video
you got a link to the stand on the 450RL? greatly appreciate it
Hey 👋🏼!! I got seme bike 🏍 I put sm wheels and now my speedometer is not working!!! He's not reading the miles. I think I need that. What do you have? Where did you buy it?
Yes you need the revised tone ring. Your brake rotor should have a few small threaded holes to mount it. Contact Warp 9 and tell them you need one
whats d tire size in front and rear and sproket set tooth. only 3.5 and 4.25 rim set available on my country.
Hey can you explain to me where and how you adjusted the speedometer?
Greetings from Germany
You will have to purchase a tone ring that Mounts to the inner portion of the hub where the speedometer cable sensor mounts
@@DIDDLYWAYNE Thank you very much! I will look up if its also offered in Germany.
I got another question.
Can you tell me what rim size you are driving in the rear. I am wondering if a 5 Inch rim would fit in there?
Big thanks!
The sizes are stated in the video. But the rear wheel is a 17”x5” and the front is a 17x3.5
@@DIDDLYWAYNE thank you. Yeah I watched the whole video but at someparts i struggeled with my english. Sorry about that!
@@jxrxd7854 no problem! I totally understand. Good luck with your build and ride safe🤙🏼
Wow nice bike🏍️
How’s the chain slider holding up?
Just fine!
My issues so far is my chain slider got destroyed and the dealer had to put a new one any ideas why this is happening? How's your chain slider?
How many miles did you have on the bike when you got the slider replaced? You're talking about the one on the top of the swingarm near the front sprocket correct?
@@vertvlogs675 I had a little over 1k miles on it
We're did you find the mirrors and counter spockret cover can't find them!!!!
I got The mirrors and sprocket cover off of soloracer.com! Hope that helps! Cheers
@@DIDDLYWAYNE yes TKU going to order them RIGHT now
with the bike sitting lower is the kick stand too long now?
It’s still functional Bike just sits more upright
Where did you buy the large disc and caliper support?
Warp 9s website
Is your speedometer off after installing bigger caliber?
The supermoto wheels are fitted with a tone ring that calibrates the Speedo for the 17” wheels
What size you are using on both rings? I wanna get supermoto rings for my crf250r but I have 0 experience on this
Are you referring to the wheels? They are 17x3.5 front and 17x5 rear
How many shades of red can you have on a bike
All of them
How's the difference between the drz and the Honda?
Drz is a solid bike for the money. Comparing it to the Honda really isn’t fair because they are almost not comparable. For the price of the 450 you’re getting an aluminum frame, which yields a lighter bike. A “performance engine” 6 speed transmission, fuel injection, good suspension (same as the race models just valved softer) drz is stuck in the Stone Age with a steel frame, carbureted engine, and 5 speed. But also way more affordable. So depending on what you want as a rider would decide what you want- you want an expensive fast street legal reliable dirt bike- go Honda. If you just want something to ride on the street with the same reliability but slower? Go drz
What’s you high seat whit those wheels on ?
What's the width of the rear rim you're running?
5” wide
@@DIDDLYWAYNE mb man watched it again and just saw you said it. Ty🙏🏼
Haha no worries bro. 🤙👉
What model seat is that im having a hard time choosing what one to get
That one is the seat concepts comfort high seat. I’ve recently switched to the comfort XL and I like it much better
Is that the 5inch rear tire?! What tires are those?
Scratch that just seen the end. How did you fit 5.5 on the rear without your chain eating your tire?
Has a 150 tire on it now
Did warp 9 provide everything you needed to do the conversion?
Yes
@@DIDDLYWAYNEi can not find that tone ring:/
do you make any adjustments to the suspension when you swap over to sumo setup?
Adjusted the clickers for a softer ride but not really much else
Could this model be converted into a scramber? Would it be practical? I'm kinda new with dirt bikes so my knowledge isn't great.
For the price point of this bike, might as well just get an already setup one, ducati/triumph etc.. instead of spending more in mods.
Scramblers are gay hipster bikes
@@xtcrider8270 cool 😎
Pregunta donde encuentro el adaptador del disco para 320 !
Is that seat custom?
Kinda sorta. You can buy them from seatconcepts.com
We’re did you get the exhaust?
Solo racer.com
what a fucking dream :/
13/49 sprockets? That’s ridiculously high gearing, 3.77 is literally a full point higher than stock DR-ZSM gearing.
Stock is 13/51. Most mx bassed bikes have a 4.00fd
what tires are those and sizes ?
Conti motions
What size tear sprocket are you using?
Hey there earl, In the video I had my 48 tooth mounted. I’m currently running a 46tooth. Hope this helps
Do you happen to know about how much your seat height lowered with the SM setup? Maybe 1.25” or so? Wondering if the wife will be more confident on it after the swap. She isn’t even flat footed on a Grom haha.
It lowed it significantly, I’d say 2-3”
@@DIDDLYWAYNE Thank you! She ended up opting for the same engine, different bike, due to height concerns (Rebel 300). Appreciate the feedback!
3100 miles? That's 5 oil changes already 😬
It’s a Honda, it’ll be fine
@Rider_9 thank you for cluing me in on another bike to avoid
What’s the width on the Front rim?
3.5 inch
With a CR 500 motor ……
I hate those headlights!!!
Can you give me this bike Gift
49 tooth to small
Depends on what kind of riding you do