Setting snaps
Вставка
- Опубліковано 28 вер 2024
- In this video I demonstrate how to set snaps into leather.
For this project you will need:
- a snap
- snap setter
- hammer (poly, wood, rubber or rawhide. Avoid metal hammers)
- hard surface
- a piece of leather with two holes punched in.
Enjoy the tutorial!
You're the first snap video I've seen that identified and named the parts before applying the parts. THANK YOU!
Absolutely the best tutorial video.on UA-cam. You are a fantastic teacher. Thank you for taking the time to make and post this video
OMG! What a simple way to explain this! Thank you so much! The best I’ve seen! 😊☺️😊
I must agree with all positive comments, I am trying to learn leatherworking and these tutorials are very helpful, there are many video's on youtube but very few good teachers..
The best tutorial on UA-cam!!!!
Thank you - Finally a perfectly clear demonstration....and it worked!!!
Thanks so much ... all the other tutorials glaze over this ... thank you for sharing
I always wondered how to do that. Thanks!
This is so clear and understandable. Thank you!!
😱 BEST TUTORIAL EVER ❣️
Outstanding tutorial. The best I've ever seen on setting snaps, and the best in general. Clear, concise, easy to follow. Very appreciated.
So I got a custom knife sheath and the male end spins what does that mean? Is the snapp set improper ?
That one tool looks like a Co2 cylinder.
Oh my gosh I've been searching and searching and this is the only clear, quick, and simple video I could find! Thank you so much!
Best video on UA-cam. Thank you for thoroughly explaining all the parts.
Thank you for a very clear explanation & wonderful camera views on this tutorial about setting snaps.
So direct to the point thank you
Your the Only One To Explain everything in Detail ... Best How To Video For Snaps ....Hands Down ......Salute !!!!
Best how to install snaps!
thank you very much.i make costumes and am just going to start using these on my halo armor and stormtroopers.
You’re awesome, never fail to deliver clear instructions!
Straight forward and complete, thank you.
Hi Mark, I would like to make something like this for a personal birthday present,
Do you have a video on how to measure and place snaps in the right places to fit a wrist, (so if someone measures their wrist and its 7" and 5 3/4" where would you place the centre of each snap ?) thx
Skip to 4:06 to get to the tutorial.
Excellent video, clear, concise and best of all No annoying music. Thank you. :)
I watched several snap videos tonight, and this one is the best by far! Keep up the good work!
I dont have a siter can i punch on the table ?
I would not recommend it. At least use a piece of leather under it or carve a sitter out of a piece of wood (you can also drill one).
Mark
@@markthebraider6720 good idea thanks alot mr mark
Thank you this helped out alot!
I did it with the Woodglut plans.
good and clear info, thank you!
Glad to hear it!
Thank you for your kind comment!
Mark
What is the proper thickness of leather to use the snap of 10 mm and 15 mm? Is there different snaps in 1 size (10 mm) which can be used for leather with different thickness?
Hello how are you
Please have an anti-rust problem
Quickly rusts in marine areas set snaps Please help
What size of snaps would you recommend for 3,5mm leather? Thank you!
That was very relaxing. And informative. Thanks
This is so helpful and clear. Thank you.
Incredible tutorial I hope your a teacher!
How many mm is the snap you are using?