How I Built A LEGO SPR 208 Sniper + Behind The Scenes Footage
Вставка
- Опубліковано 25 чер 2024
- The SP-R 208 or XRK SP-LITE 208 or SA-B 50 Sniper Rifle out of LEGO
Main video: • Working LEGO Sniper Ri...
Livestream playlist: • Livestreams
🎬 Main Channel: / kevin183
🔵 Twitch: / kevko183
📷 Instagram: / kev183in
🎵 TikTok: / kev183in
🛒 Buy instructions here: www.mocsmarket.com/vendor/kev...
Official instructions are only available on mocsmarket.com! Just the instruction, no bricks included. Everywhere else you buy it is pirated and stolen from me.
0:00 - STEP 1 Concept and Design
1:55 - STEP 2 Building the real thing
2:11 - STEP 3 Testing and reworking
9:52 - Outtakes of the main video - Ігри
Yep, thats how I made it
Kevin, a common problem that i face when making these weapons are
1.trigger bending (and it broke) observable on many builds
2.the mechanism of this firearm is YEETING (well not so much) YEETING the bolt and try Harding to pull back the bolt and it usually causes jamming (observable on the snyzer-tech Deagle)
oh, forgot 2 add, snyzer was correct on rotating the bullets because the bullets have cracks in them and will be stuck so you can't chamber a round
2nd, it will take too long to load them into a magazine
thanks kevin for making this possible
@@Monster-st8hb you could glue them
11:45 “sniper”shotgun
Kevin, well kevko, i have always admired you and your builds, you have been my inspiration for lego guns, keep it up and thank you!:)
kevin, longer barrels do not help accuracy, well in a senario where you put oil in the barrel, then it would help the accuracy.
when i built your amazing AWP SNIPER, the trigger broke which is a common mistake on using too much rubberbands
second, the longer barrel also slowwwed the bullet speed down and at last what will happen is that the bullet would get stuck in the barrel
third, t_h_e barrel also took the gun itself into 3 pieces
This gun very insane
Its insane!
agrreeeeeeeeddddddddddddddddddddd
^_^
Nice
in a sulloution to fixing the aim of the gun, you can use a=nother bullet which is the connector that connects axels and stuff like lego miniguns (you may see them in some builds like @snyzer tech
you can build a 5 stud long flight stable bullet with a axle to axle conn., a 4L axle and 3 half wide bushings in the front
And this new mech is great. It makes it even simpler and more reliable while having a mag without a 'bullet lock'
Thanks! Do you think it will fly more straight? I´ll try
@@kevko183 yes it works like an small arrow I think :D The axle connector is part no. 32039 btw.
@@guentherjuergen7304 I made one and 3D printed it. I linked it in the video somewhere in the comments
@@educationalpurposesmostly nice, I'll check it out
that good
hmm you think this shooting mechanism could be retrofitted into other, store bought type lego rifles?
What rubber bands do you use ?
Where did you get the rubber bands?
Wow
PLZ put instructions in to a video
Your girlfriend at the end😱
Verbos ensinar como faz isso aí
codm?
It’s sad how he couldn’t aim well…… I cant ether but my hopes high for you Kevin!
not his aim but the aerodynamic of the bullet
Ur used tape!!!!….🫥cheater!!!!!!😱
airsoft cheaters be like.....
Pshht...noboddy´s gonna know....
@@kevko183 oh ye its a secret😶