Thanks! for the video. I tried what others said of placing the chip around the transponder, I tried different places but non of them worked. I bought the litttle bypass4 box and also had to hook the green wire ( the one that come together with the ground and power cables) to the signal wire going to the bcm and work really good. It save me good $600.00 to $1000.00 dls. Thanks again!!!!
thanks for the video i wired my bypass like this for my remote start now i can just get a normal key cut. i used a programmable one for mine it was a PLJX UTI. sweet you made my day
I bought a PK 3 Transponder key blank online and had a key maker duplicate it from my original key. Then followed the directions for programming the key from the ignition switch. Took less than 5 minutes to program it and works great. 2001 Lesabre.
I was building a demo out of a 99 Montana van. Ignition cylinder was stuck. We broke it to get it to rotate. The pass key 3 sensor was broken into pieces in the process, rendering it usless. Will this product replace that allowing us to get the van running?
Good night friends to see who can help me I have a chevrolet 1996 with passkey system and I lost the key and in desperate intendantes to ignite it, in security system I ended up blocking it full x now I got the key but I do not know the step to unlock it if someone knows the Topic and know how to help me would be greatly appreciated.
I'm pretty sure this does not permanently fix the problems. This method will bypass the radio transmitter/receiver that surrounds the lock cylinder as well as the transponder chip in the key. This method does not bypass the anti-theft control module which is connected between the transmitter/receiver and the engine ECM.
Somebody tried to steal my car and damaged the coil of wire that is around the tumbler and now my car won't stay running when cranked. It runs about 10-15 seconds then cutts off. What can I do?
Hey bro, I have a 04 colorado I replaced factory stereo with a after market pioneer supertuner and I had 2 purple wires left over and I'm locked out with a PASS LOCK ICON on steady on my dash that dint blink at all , factory stereo is gone so I hard wired the original plug and got an interface plug wire harness and put it all in and still have the passlock issue. I done the key thing but when I turn the key on the passlock icon Never blinks or even goes out but if I turn the key to start and release the ICON will go out and be blank. ANY suggestions or ideas, comments would be greatly appreciated, thank you ! If you need to talk maybe we can go on ig or messenger ? PLEASE HELP
hypothetically if the vehicle was experiencing a no start condition due to a malfunctiong security system, would this box remedy the situation and allow the vehcile to start? in other words does this actually bypass the securty system? i dont undertand how this box works...
Have a 2003 Silverado 1500 5.3 engine 4x4 automatic trans. Was going about 60 and it just died, on the dash it said Battery Discharge, then that went away. went to the side of the road, and tried to start it,would only start for 20 30 sec then die. Let it set for 30 minutes, started right up put in gear went 500 ft then died. got it towed home next morning tried to start truck started right up, and I drove it into the gararge, put it up on jack stands and started truck, put in gear, went 20 mph 40 and even 50 mph with wheels turning. Let it idle for 30 minutes then it died. tried to start it and when turning key to start, acted as though the key was stuck on to start and the started seemed to turn over faster than normal and I had to physically turn the key to the run position. I looked on the forums and most said it was the Passkey, Passlock vats messing up. I tried the relearn and nothing helped. I have the two key system, where one key for driver one and another for driver 2, unfortunately key no 2 is lost. When truck does start up runs just great. I would like to by pass this but do not have a remote start . what resister do you use and between what two wires? Sure sounds like what you were experiencing. New engine, all new sensors on the engine, and new fuel pump , regulator , fuel filter, all four oxygen sensors replaced. New alternator, new battery, crank, cam, oil, coolant sensor all new. Still same problem. Please respond, would like to know how to by pass the anti theft and passlock system on this truck. Thanks
So this renders the transponder neutralized and eliminates any theft deterrent abilities of the vehicle. Extra keys are $10 per, and the vehicle will program the keys for you if you have one. So you are relocating the transponder chip. You aren't bypassing anything. Bypassing implicates eliminating the functionality of the system altogether. You are just relocating the transponder chip. And I am sure that this fancy item you are selling is much more expensive than a new key.
de todas formas no eliminas la seguridad del auto? es lo mismo que si pegaras el chip en la antenas lectoras alrededor del cilindro de ignición. Y sin gastar en nada, eso si, eliminas el sistema de seguridad. cualquier ladóon abrirá el cilindro y se llavará tu auto
Te mueves de los barrios donde Hay ladrones, y se acaba el problema. Vives entre la Chuzma, ya sabes lo que te espera. La llave sola es suficiente. ese pinche Chip no es necessario. De otra manera compra aseguranza que se llama SMITH & WESSON y listo!!!
instead of doing all this why not just take the plastic cover off the steering column and stick the whole key in there close to the ignition switch... That's all I did..
What's that for? You mean just stick the key to the metal of the ignition switch for a few minutes or seconds so then you can use the same key to start the car? Sorry my ignorance. I'm asking because my car is being like blocked for a month and a half cause the key turns but it got stuck. Thank God I already watched a video of how to fix that. But the car still no start with no power or any lights on anywhere on the car. The battery is good like 12 volts and a little bit more. The fuses box have power including the cigarette thing were you plug the cellphone charger. So please let me know how can I fix this. I already replaced the ignition switch that goes on the back of the cylinder and also the ignition solenoid. Thanks in advance. God bless.
ATTENTION: If you came here looking how to "BYPASS" or "IMMOBILIZE" the problematic factory Passlock III security system on your GM car know this - This video and product shown DOES NOT "bypass" or "immobilize" the system. All this product does is AMPLIFY the signal received by the key tumbler. The original transponder chip still sends it's signal to the ORIGINAL and FLAWED key tumbler receiver... Albeit through a now stronger signal. It does NOT bypass the immobilizer like the title says.
I was hoping to get a friend's car going because this is the closest video to an 01 grand prix but I can't see much when the important bits are out of focus. I got the point of it, but it's still annoying.
Either way, I'm not sure how this is supposed to fix the problem as it only seems to boost the signal going to the security system, not bypass it at all.
Thanks! for the video. I tried what others said of placing the chip around the transponder, I tried different places but non of them worked. I bought the litttle bypass4 box and also had to hook the green wire ( the one that come together with the ground and power cables) to the signal wire going to the bcm and work really good. It save me good $600.00 to $1000.00 dls. Thanks again!!!!
thanks for the video i wired my bypass like this for my remote start now i can just get a normal key cut. i used a programmable one for mine it was a PLJX UTI. sweet you made my day
I bought a PK 3 Transponder key blank online and had a key maker duplicate it from my original key. Then followed the directions for programming the key from the ignition switch. Took less than 5 minutes to program it and works great. 2001 Lesabre.
+rayford21
Footnote: Some makes and models have to have replacement keys furnished by the dealer only.
yup glue the chip on the column works
Will this fix the issue I have with my anti-theft system coming on and killing my 2001 Yukon?
What happens when its hot and it falls off? or gets lost entirely?
I was building a demo out of a 99 Montana van. Ignition cylinder was stuck. We broke it to get it to rotate. The pass key 3 sensor was broken into pieces in the process, rendering it usless. Will this product replace that allowing us to get the van running?
Wow this is very cool information. I am also curious i was wondering if I cut the yellow wire while the car is running
Good night friends to see who can help me I have a chevrolet 1996 with passkey system and I lost the key and in desperate intendantes to ignite it, in security system I ended up blocking it full x now I got the key but I do not know the step to unlock it if someone knows the Topic and know how to help me would be greatly appreciated.
I'm pretty sure this does not permanently fix the problems. This method will bypass the radio transmitter/receiver that surrounds the lock cylinder as well as the transponder chip in the key. This method does not bypass the anti-theft control module which is connected between the transmitter/receiver and the engine ECM.
why dont you just duct tape the transponder to the ign cyl housing??
Somebody tried to steal my car and damaged the coil of wire that is around the tumbler and now my car won't stay running when cranked. It runs about 10-15 seconds then cutts off. What can I do?
Hey bro, I have a 04 colorado I replaced factory stereo with a after market pioneer supertuner and I had 2 purple wires left over and I'm locked out with a PASS LOCK ICON on steady on my dash that dint blink at all , factory stereo is gone so I hard wired the original plug and got an interface plug wire harness and put it all in and still have the passlock issue. I done the key thing but when I turn the key on the passlock icon
Never blinks or even goes out but if I turn the key to start and release the ICON will go out and be blank. ANY suggestions or ideas, comments would be greatly appreciated, thank you ! If you need to talk maybe we can go on ig or messenger ? PLEASE HELP
Can u help with o6 PT cruiser
hypothetically if the vehicle was experiencing a no start condition due to a malfunctiong security system, would this box remedy the situation and allow the vehcile to start? in other words does this actually bypass the securty system? i dont undertand how this box works...
no.. get the xpresskit that learns the password sent to the pcm.. that will bypass it altogether
Mark Borrmann Jr could you provide a model number and manufacturer that will bypass a pk3 system? greatly appreciated!
Mark where could I purchase the expresskitt to bypass my security issue on my 04 pontiac?
I just took the original key and taped underneath the plastic as well. Seemed too easy.
Have a 2003 Silverado 1500 5.3 engine 4x4 automatic trans. Was going about 60 and it just died, on the dash it said Battery Discharge, then that went away. went to the side of the road, and tried to start it,would only start for 20 30 sec then die. Let it set for 30 minutes, started right up put in gear went 500 ft then died. got it towed home next morning tried to start truck started right up, and I drove it into the gararge, put it up on jack stands and started truck, put in gear, went 20 mph 40 and even 50 mph with wheels turning. Let it idle for 30 minutes then it died. tried to start it and when turning key to start, acted as though the key was stuck on to start and the started seemed to turn over faster than normal and I had to physically turn the key to the run position. I looked on the forums and most said it was the Passkey, Passlock vats messing up. I tried the relearn and nothing helped. I have the two key system, where one key for driver one and another for driver 2, unfortunately key no 2 is lost. When truck does start up runs just great. I would like to by pass this but do not have a remote start . what resister do you use and between what two wires? Sure sounds like what you were experiencing. New engine, all new sensors on the engine, and new fuel pump , regulator , fuel filter, all four oxygen sensors replaced. New alternator, new battery, crank, cam, oil, coolant sensor all new. Still same problem. Please respond, would like to know how to by pass the anti theft and passlock system on this truck. Thanks
I have a 2010 Chevy, what version do I have? There’s a + sign on my key so I’m guessing PK3+ ?
yup, thats it
So this renders the transponder neutralized and eliminates any theft deterrent abilities of the vehicle. Extra keys are $10 per, and the vehicle will program the keys for you if you have one. So you are relocating the transponder chip. You aren't bypassing anything. Bypassing implicates eliminating the functionality of the system altogether. You are just relocating the transponder chip. And I am sure that this fancy item you are selling is much more expensive than a new key.
This product does work in many cases. It just doesn't "bypass" the immobilizer like the title suggests...
that wouldnt work. would need to be in front of the transponder reciever and then you would have trouble putting the column shroud back on.
How much is the box you sell?
You should have shown how to wrap the wire around the tumbler ..we need more visual
So basically you replace the faulty key tumbler instead of adding all this!!
How can I contact u
de todas formas no eliminas la seguridad del auto? es lo mismo que si pegaras el chip en la antenas lectoras alrededor del cilindro de ignición. Y sin gastar en nada, eso si, eliminas el sistema de seguridad. cualquier ladóon abrirá el cilindro y se llavará tu auto
Te mueves de los barrios donde Hay ladrones, y se acaba el problema.
Vives entre la Chuzma, ya sabes lo que te espera. La llave sola es suficiente. ese pinche Chip no es necessario.
De otra manera compra aseguranza que se llama SMITH & WESSON y listo!!!
instead of doing all this why not just take the plastic cover off the steering column and stick the whole key in there close to the ignition switch... That's all I did..
will try your technique , much more easy ........ good advice
What's that for? You mean just stick the key to the metal of the ignition switch for a few minutes or seconds so then you can use the same key to start the car? Sorry my ignorance. I'm asking because my car is being like blocked for a month and a half cause the key turns but it got stuck. Thank God I already watched a video of how to fix that. But the car still no start with no power or any lights on anywhere on the car. The battery is good like 12 volts and a little bit more. The fuses box have power including the cigarette thing were you plug the cellphone charger. So please let me know how can I fix this. I already replaced the ignition switch that goes on the back of the cylinder and also the ignition solenoid. Thanks in advance. God bless.
This is more a opt around not bypass.
I can't see that CHIP but I'll bet it's nothing more than what is commonly known today as RFID chip..........
I have a plan key. How do I get rid of passlock problem
If you have no programmed chip keys, check with dealers and locksmiths. I have seen bypasses, but have my doubts if they actually work.
is this also applicable to PK3+ keys?
Yes
if it's a starter cut off simply run a wire from the ignition to the starter relay done problem solved takes 10 mins 5 dollars
most ECU and PCM will shut off fuel and/or spark on top of that.
ATTENTION: If you came here looking how to "BYPASS" or "IMMOBILIZE" the problematic factory Passlock III security system on your GM car know this - This video and product shown DOES NOT "bypass" or "immobilize" the system. All this product does is AMPLIFY the signal received by the key tumbler. The original transponder chip still sends it's signal to the ORIGINAL and FLAWED key tumbler receiver... Albeit through a now stronger signal. It does NOT bypass the immobilizer like the title says.
Yes just like the rest of them that says they do no bypassing done just hacked up garbage like this and every other video on passkey
Aftermarket crap ! I cut a few of these out already .
MR. Goodwrench Omega is the balls.
derekconnerphone
Because then he wouldn't make a sell on the black box thing.
Get a better camera. Can't see anything, too blurry.
Mak
terribly out of focus
thats not a bypass. WTF
Asking for subs on a video that's out of focus like this? Really?
+hellcat1988 sheesh, its an old video, cut a guy a little slack jack!
I was hoping to get a friend's car going because this is the closest video to an 01 grand prix but I can't see much when the important bits are out of focus. I got the point of it, but it's still annoying.
sorry, it's alot better now, this was done back in the day..
Either way, I'm not sure how this is supposed to fix the problem as it only seems to boost the signal going to the security system, not bypass it at all.
@@hellcat1988 lol,