How to establish a connectivity between Cisco WLC and Network

[@ckahiaku]

Now I am having an Issue to make the AP Join the Controller, its a 1702I .
I got this from the Logs
*Oct 25 13:10:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.8.10 peer_port: 5246
*Oct 25 13:10:57.215: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.8.10 peer_port: 5246
*Oct 25 13:10:57.215: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.8.10
*Oct 25 13:11:15.443: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.8.10:5246
*Oct 25 13:11:15.535: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Oct 25 13:11:15.535: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Oct 25 13:11:15.539: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 25 13:11:15.563: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 25 13:11:16.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 25 13:11:16.567: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Oct 25 13:11:16.575: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Oct 25 13:11:17.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 25 13:11:17.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Oct 25 13:11:17.595: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 25 13:11:17.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Oct 25 13:11:17.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

[@CiscoNetworking]

First Check the Time,Country code and Active Licenses on the WLC

[@jserr9682]

Your ROCK!!!!

[@CiscoNetworking]

Could you please let me know what portion of the video is not correct so that I can correct myself.

[@jserr9682]

Let me ask you this do I need to be connected to the internet to accesss the WLC GUI cause the browser won let me access

[@CiscoNetworking]

No, internet connection is nothing to do with the WLC GUI that is in you internal/Local network infrastructure.

[@CiscoNetworking]

Check the proxy settings and make sure there is no SSL certificate errors on your browser

[@jserr9682]

oh k Ill check that

[@ckahiaku]

It's working now.
The AP was an A so choosing US made it work.

[@ViSonofDil]

When we talk about Native VLAN, It's not going to tag anything when it exits a trunk port. Isn't it?

[@CiscoNetworking]

True, what ever traffic comes without any tagging will fall under that native VLAN

[@andrewsaber6641]

in WLC CT5520-50 can i connect my network only on the Redundancy-management port and not use an SFP to connect to either of Port 1 and 2 which are labeled as management ?

[@CiscoNetworking]

No, HA SSO have keep alive messages exchanged and HA will not come up without the management ports connected to infrastructure