landcruiser ride height sensors | GX470 air suspension NOT working! |control light stuck on normal
Вставка
- Опубліковано 16 жов 2024
- How i fixed my toyota landcruiser air suspension problem ..... Another do it yourself landcruiser job and save money ! 🛠 🔨🔧 😀 ride height sensors
#landcruiser
#airsuspension
#aircompessor
www.buymeacoff...
Nice and simple instructions
thank you , i had the problem with mine and looked on youtube but there was not many videos about repairing the air suspension clearly but more about converting them to coil spring when they had failed . i wanted to keep mine as it was originally built and it was worth the effort .
Thank you ❤️ from my heart I searched a lot for the repair and only found a change in the manual suspension
Glad it helped Please share it , it may help others with same problems
Hi.
Nice video.
As you measured the ride height from the bottom of the rim, I must consider the rim size when I am going to do the same job on my car. What rim size was on your car when you did that job? Have you measured all the wheel angels after setting the height? Have you had any unnormal tire wear?
Hi , the Measurment from the bottom of the rim is just to get equal distance on both sides running down the centre to the wheel arch this is to get the height same on both sides using the adjuster on the sensors in normal height position . wheel size does not matter . make sure both wheels are inflated to same pressure ....... you can set the adjusters to a height you prefer i found that mine felt a smoother ride a little higher each time i set them both and drove the car to see how it felt . if both are set at same height then car should run true with no abnormal wear . my wheel size is 265/65/R17 . Hope this helps
@@Ayorkshiremansdailygrind Thanks a lot. I will start with the same hight as you mention in your video.
You’re a lifesaver!!!
Hi daniel , thanks for your comment ....glad it may have helped 👍
Hi there just about to do this job did do the compressor and the bags a few years back ,do you adjust the bottom nut closet to the sensor for higher up ?
Thanks
hi sorry for lat reply .. slacken the nut which has a slide and adjust it so the sensor arm goes upwards then keep measuring till they are both even and same height either side 👍👍 hope this helps
Hi there mate can you please send me a link where you bought your parts for thanks
Hi , i got the sensors from ( milner off Road ) business bakewell derbyshire and air compressor from allparts on ebay .... i have since seen all the parts you need on ebay . hope this helps
@@Ayorkshiremansdailygrind yeah it has helped me thanks for all your help and advice today
Hi there can anybody help me please where can I buy a air suspension compressor from thanks
most parts are available on ebay now
@@Ayorkshiremansdailygrind ok thanks very much for your help and advice today