Copper Casting - Making copper "Trivets" for the kitchen
Вставка
- Опубліковано 28 тра 2024
- In this video, I make a set of solid copper trivets in my home foundry. I made pattern using fusion 360 and the 3d printed the patterns in a plastic called PLA. Then I made a sand mold with a sand called petrobond.
Please consider supporting me on Patreon. www.patreon.com/user?u=58360840 You'll receive access to patron only posts as well as 3d printing files
------- Affiliate links ------
Scotch Brite Wheels amzn.to/38JmJgY
Polishing Compound amzn.to/3wHXof1
The best polishing wheels ever amzn.to/2VjG2GK
Overture 3d printer filament amzn.to/2UqwwRC
Some of my favorite hand files amzn.to/3lFzUDO
The die grinder I use amzn.to/3Aebg1c
Clear Coat - I love this stuff! amzn.to/2V71kYj
NeverDull metal polish amzn.to/3zumeiH
Liver of Sulfur amzn.to/3rIUBjz
Artillery Sidewinder X2 3d printer amzn.to/3KzJwZF
Elegoo Saturn 3d Printer amzn.to/3iGIPlw
Creality Ender 3 Pro V2 amzn.to/37sidiM
All of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase. - Навчання та стиль
As some of you have pointed out, copper isn't the best choice for trivets. I like the look of copper and thought these would look interesting looking regardless of whether they work as well as they should or not. Also, we have granite countertops so heat transfer to the countertops is a non issue. I'm still going to make some feet for them though. Thank you all for watching! 🍻
Little pieces of felt glued under the feet will be sufficient. So you avoid scratches, too.
I guess they have a large thermal mass so this may not be an issue, but being a conductor of heat is the opposite of what you want from a trivit. It's supposed to isolate the surface from heat to protect from damage. I would replace or cover the feet with rubber.
Was literally thinking just that, with a similar solution.
Think it will be fine, it’s replacing napkins after all
Also going to pull more heat from the food.
Or leather
@@andrejohnson6731 Or cork.
Really cool! Before and during my time at The King of Random, Grant tried several times to cast copper gears. But he never wanted to do a fully enclosed casting, because then you can't see the copper filling the mold. These look great!
Hey nate!
NATE!!!!!!!!!!!!!!!!!!!!!!!!
His voice is so much like hearing Grants, I really miss watching him (and you) and the old TKoR.
Thank you!
I've seen some king of random videos. Your right I believe he did a lot of open mold foam casts. I do mostly closed mold foam casts. For copper you would need a thicker shell. Copper is too heavy and would bleed out into the sand.
Copper will suck the heat out of your pan/meal. And transfer the heat quickly to the surface you are trying to prevent heat getting transferred too. It'd be cool to add some rubber feet (those little sticky dots) to protect the surface you use it on. And maybe CNC/Laser cut out a thin piece of cork sheet to adhere to the top to make it as functional as it is beautiful.
You could pocket out some shapes on the top surface to inlay with cork or do a trace of the entire shape, anything to prevent direct contact of the pan with the copper.
Drilling some holes and putting titanium pins as heat break would also do the trick too.
That's not a bad idea! I figured copper wasn't the best choice but people enjoy seeing copper casting. We have granite countertops so the only real heat transfer will be from the hot pan to the copper trivets.
@@robinson-foundry You could also put them in the oven and use it to keep your meal hot for longer? :)
Couldn't agree more on the use of "overture pla filament" That's the best PLA I've worked with.
Continuing the kitchen theme, it would be interesting if you would try forming some copper cookware (perhaps a sauté pan), and line it with tin.
I think youre right! Thanks for the suggestion.
I can't wait for the year 2025 where everything in your house is made out of copper things you made. Great video!!
I look forward to that too! Lol
🤣🤣🤣🤣
I would personally print some 'caps' for the feet in TPU (I think that's the 'rubbery' 3d-print material) so that my counter and table won't get scratched when I use them :)
Man... it is so satisfying watching this. THANKS FOR SHARING!
I like the aesthetic of the layer lines. It's honest
I agree 👍 I've done some lost foam Casting with layers and I particularly like the look. I've had comments saying otherwise, but I think it's cool
Commenting here until Robinson Foundry collabs with us! 🫡
Finally some more copper content!
Yeah!! I love copper too. It pours so smooth when Casting
Copper is my favorite metal
I agree 👍. I melt mostly aluminum but when copper is definitely my favorite. It pours so smooth and looks awesome 😎
@@HeinrichsMade It's my favorite mostly because it's got a bunch of cool properties and cus it's so easy to work with. You can make it soft, you can make it hard, you can melt it bend it stamp it and cool things off with it, and it looks cool too
@@ziocrielo6148 you are so right 👍 it's a heavy metal, but very workable. I cast a copper rose for my valentine this year. When I was cutting off the sprue I had to be very careful not to accidentally break it. Cast copper does bend easily, but too much it will snap.
Your sandcasts are the best I've seen 👍
Uhm, isn't the point of a trivet to keep a pot/pan's heat isolated from a (table) surface, both to keep the pot/pan hot, and protect the surface?
Wouldn't making them from the _very_ heat-conductive copper be somewhat counter-productive to that point?
Copper I love copper more videos please on melting Copper 👍🏻😊😁
I really like how you can see the 3d print texture
As usual, your work is nothing short of exquisite, but I think these trivets might be my favorite item you've cast!! Simply gorgeous pieces of functional art!
As an electrician this is awesome!
Would love to have a set of those for sure. Awesome job. Thank you.
I love electricians 👍. That's who I get my copper to melt from 😎
They came out with amazing detail !
Detail is in the coating 👍
Very Cool Trivets !!!!!!!!!!!!
Now waiting for the silver version, for extra fast heat dissipation.
Won't copper do a great job conducting heat into your countertop?
yes. I am not sure how they overlooked that.
@Bryan but if the legs get as hot as the pot they will still burn the table. They will just burn in a small area instead of a large one.
Thanks for the video. I'm wanting to learn how to make molds and cast copper and yours was the 1st instructional I saw. If you have any beginner how to vids I'd definitely enjoy learning. Thanks again.
You should make your sprew thicker to avoid that shrinkage.
Do you think a thicker sprue would help there? I haven't had a problem with smaller sprues
Can you make a clock movement? Or an oversized Swiss watch movement? That would be epic!!!
Wow, high tech, very cool!
I would be very curious to see you tackle one of the Gingery home machine shop projects. You have experience with some fairly complex castings. I bet you could put together an excellent metal shaper. Or maybe use the 3d printer to make an old fashioned shaved ice machine with your name inlayed to the castings. That would quite dapper.
Beautiful work!
When doing lost PLA casting like this, and want to keep the layer lines, look into other top infill patterns than just linear. Hilbert curves would be interesting. Prusa also has a "Fuzzy Skin" option that I haven't seen people make much use of.
Well, that wasn't lost PLA casting.
Might want to cover the feet with something heat resistant. Both to prevent the copper from burning and scratching the surface of whatever you put it on when used.
that's going to suck the heat right out of your pan, going to be untouchable for a while after anything goes onto it...
Wow those castings came out beautiful. Nice!
Copper Casting is cool 😎
In the home maker series at robinson foundry, we are going to next make a set of copper pillow cases to match the utility of copper trivets!!!!!
Thank you so much for this channel. My wife would also like to thank you. It has cured my ED.
Well that's amazing 👍👍👍
You could upgrade your artillery SWX2 by casting metal feeder gears and the stuff in the extruder i forgot what its called
Always so precise and clean. Very nice work.
Very nice
I 👍
Awesome job dude ! 👍🏻
Your ideas & execution always impress, love all your projects. 👍👍
Cool 😎
I'd have been tempted to leave them to get a patina.
Other than a platinum-rhodium alloy I literally think you could not have picked a worse material for preventing heat transfer to the tables
Im not sure copper is the right material for this since it is very conductive. If you want to use it anyways the trivit probably isolates better if you keep the feet on the upside to minimize the amount of heat transferred from the kettle into the trivit and spread the heat your desk will have to deal with onto a bigger surface.
😊 good job
Those are lovely. I could see them with a mirror like finish as well. Do you sell them?
cool video
nice
Fancy!
How many uses of the petrobond do you usually get before needing to replace it?
Can you recommend good beginner tutorial info. your affil links are also very helpful in creating a start up list
Yess more copper :D
Yeah!!!! I love watching melted copper. I pour mostly aluminum, but have done a few copper projects.
I want a set :)
Me too 👍
Cool, but they are going to cool down the food you put on top really fast. Copper has better heat conductivity than Aluminium, 398 W/m•K vs 247 W/m•K, whereas a cast iron trivet will just have 60 W/m•K, and a stainless (304) is just about 20W/m•K
What would be a wooden trivet's conductivity? I suspect it would be better than all of the above.
Great way to make burn marks on your wooden benchtops 🤣🤣
Hahah my bench top is full of burn marks too.
So glowing kunai
"just look at these layer lines"
*as the camera zooms in on top fill*
What kind of crucibles are you using?
where do you get your Petra bond?
You don’t show the use of any flux or removal of dross. Was it not needed or just not shown?
I don't use flux most of the time either. I have used it when melting brass.
What's the purpose of a draft angle when using petrobond? A draft angle is for removing from a solid reusable mold.
Where did you source your phosphorus copper from? It looks like the easiest storefront (budget foundry supplies) has closed down, and I was wondering if you had another supplier
Does the protecta Clear leave a matte/ satin finish? or a clear gloss? and is it sticky to touch after its dried?
It leaves a slightly shiny finish. Its hard to tell its even there.
@@robinson-foundry thank you! I need some for my custom lightsabers that have copper accents and parts
@@robinson-foundry thank you! I need some for my custom lightsabers that have copper accents and parts
Why not print this upside down as one piece, instead of making removable risers?
This is an excellent project. Very skillful. I'd love to do a collaboration.
👍
You need to lower bit more for first layer :D 0:51 clearly shows that its not smooshed enough
💖💖💖
nice build
but why multi part set up?
Everything is cool, but it is not clear why the triangular steps on one side of the gear?
Is petrobond reusable?
Yes, you just need to regenerate it with oil. I use greensand which is regenerated by using water.
⚙️😮
If you want to eliminate the shrinkage dips in the t sections of your casting you can "chill" those areas by placing steel blocks on those areas when moulding. When the liquid metal hits the chilled faces it will freeze of and stop the shrinkage.
Ah. My favorite game: "Will it incinerate"
Can someone tell me what would happen if we melted metals like aluminium,zinc, copper,silver,brass together?
You would form an alloy.
Google is a thing, sweetheart...
@@user-sz2px8pv3f bro i know that obv 😒 but it wont show me specific results. I don't think there is a video of that on UA-cam.
@@canadiangemstones7636 but what kind of alloy? How strong would it be? What would it's colour be like?
It would make an alloy. Different percentages of each metal would determine it's strength and color.
why didn't you mesh the gears to see if they would be doing their thing? and figure out to what degree they would "scrape". be a lot cooler if you did
I was today's year old when I found out what a trivet was.
If you were assuming people generally know what trivets are, I suspect you were incorrect in that assumption.
You have a twin?!
Just realized you sound a damn lot like ClownPierce
why not just use aluminium? It would have been cheaper + less heat conductive than copper. The copper will even help cooling down the pan more quickly, storing all the energy.
Oh, I normaly call those "things to put hot stuff on so you don't burn the god damned counter"
bro made Dwemer cogs
Hello Seth. My question is not related to this video. It is about this video you posted 6 years ago. ua-cam.com/video/8f4E2ODzhxw/v-deo.html I would like to know if the files are still available and the thickness off the material you used, please. Thanks
Hi, yes there’s a link to the file in the description. The wood I used is about 1/8” thick. You’ll definitely have to do some experimenting before cutting the whole thing. Good luck!
🤔
it looks like you just stole it off of someones wind turbine
Most expensive pot coasters ever
isn't solid copper the opposite of what you want for a trivet? you want something that is super fibrous like pressed paper fibers. Basically, you want asbestos pressed into that shape you've made. Obviously you don't literally want to use asbestos, but you want something with all the same properties (minus the whole cancer thing). Buck Knives sells a recycled pressed fiber cutting board that works great for this, and it has a nice knife that slides into the bottom
Hi im first
Hi first! I'm Dad
Love the stuff you usually make but this is the most stupid idea ever. Sure I might be usubke sometimes but you need a poor heat conductor for that task, not a copper one..
I love this idea, but at the end of the video you said you are going to enjoy this product for years to come...... soooooo you are going to be burning your hands for years to come?
1050th
🔥🪙make sure no fingerprints are left in the sand design.. 🪙🔥
Phew so many armchair critics.
These look great! Well done.