How to HPA tap Green Gas Airsoft Mags | CQB Russian HPA Valve
Вставка
- Опубліковано 16 вер 2024
- This video shows how to use the HPA CQB Russian valve for WE mags. For those who want to know how to safely tap their green gas guns this is the video for you.
Link to gun: www.evike.com/...
link to HPA valve: www.evike.com/...
Link to WE mags:www.evike.com/...
4:56 did the dog teleport to another dimension?
Indeed
It teleported back in at 5:08 LOL
ALWAYS use Teflon tape (ptfe) on threads. Don’t copy this way but it’s close
U r just a legend I am watch like over 100 obout this a they just only talk about nothing but u tell me everithing in 5 minute how to make my pistol HPA thx man
Glad to hear it
There are convenient, but brittle. Drop the mag and it hits the valve....its toast. I found brass fittings that are more beefy and even some angle fittings to get it at a 45 or 90 degree angle. You drill out the end cap with a bigger hole and put it on before you put in the CQB Russian Valve. I use a Dual Pistol setup at some open plays in the area, loads of fun.
Ahhh that’s a good idea.
What is the thread size and pitch on the CQB Russian valve?
Loved the video, I laughed when u said it a pain with having to switch the hose around between two mags… I run seven. Lotsa fun
This is really cool! Thanks for sharing with us, mate.
No problem !
You can file, sand, or drill a bigger hole for the cap to fit on. You just put the cap on first then screw in the valve adapter. Also you can use Teflon tap instead of the o-ring. I'd suggest enough tap to make one round around the threads and make sure there is no tap in the valve hole. There Is also an adapter that goes on the end of the mag that will allow m4 style mags to supply ammo for the pistol mag that have the hpa valve already installed. That will run about $100-$130 depending on which pistol you have. The adapters for the m4 mags can be found on airsoftgi I believe.
What else do you need to get it fully up and running like the tube and stuff? Also thanks for the vid!
Assuming you have the pistol mag and the valve you still need a HPA tank, regulator, and hose.
Thanks really helpful!
Thanks I was looking around what I needed to tap a gun I was looking into a polarstar but cost way to much but wanted a tapped sidearm for awhile with it being not to much thanks
No problem !
Can I use a similar setup to tag my magazines to a propane tank instead of hpa?
is there air in the mag when you detach the hose?
Can you use Teflon tape as an extra sealer when you screw in the tap?
yes
Hi I got the same gun as you I got a question is it just me or the sai blu has horrible gas efficiency
Is this a universal adapter for all types of green gas mags regardless of brand? Would it work with my vfc mp7 gbb? What type of regulator do you recommend?
On Evike they have 2 versions I think. This one was for WE mags. But there are other ones this fits on but you would have to look at the link in the description and see if it fits on your mag.
Relly quick I have this exact gun is there any other hpa with extra bb capabilities where I can hold more ammo
Not that I know of
Hi, thanks for sharing.
Any clue if these Russian valves also work with Pro Win mags?
Thanks!
If you are tapping into a Green Gas mag aren't they rated at around 120psi, how can it run HPA at 850psi? Do you have to regulate the HPA down to Green Gas pressures? If so how do you do that?
Yeah you need a regulator and I run it around 50psi
can I use any HPA valve or do I need to use this specific valve for this build?
did you have problems with the blu? i bought a co2 blu a while ago and every time i fixed it it broke in another spot(broke a lot)
Hey do you reccomend any pistols at around $150 dollar range that'd be able to have m4 mags up to it?
does it swivel
Can I do this to a elite force magazine
So I was going to mag tap my WE tech Glock 19 well I am doing it lol I have the bit I just got it got the hose etc now... I'm interested to know, maybe but what about a permanent tap using a cealant ?? Or do you find it's fine like that ?? With no gas escaping or anything. Just thought I would ask thanks.
Love it tho !! So keen haha
So will this work for any green gas pistol? I am buying an m9 airsoft pistol. Will this work?
Yes it should just make sure you get the correct valve. There is two types on Evike there is a WE and I think a KWA
does this tap work with the umarex glock gen 4 blowback BB gun?or only for airsoft?
No sure
Is the tap universal bc I wanna do this to my aw competitor but idk if it’ll work, and can you refill the canister with just an air compressor?
They are not universal you can check in the link to see if it works for your mag. This one only works for WE style mags. I think there was one for KWA mags also. I had an AW custom drum mag and I bought this for it and it worked great so I think you would be fine. But I fill my HPA tank either with the compressed air from the field I play at or the scuba tank I have that had a special valve for it. Don’t think a air compressor works because it has “dirty air”.
Which type of valve do i buy for a Vorsk Pistol, Its a 4.3 Hi-Capa
How many psi your tank?
can i do it on a AW Custom Drum Magazine for a Elite Force Glock 18c ?
Will it work with glock 17 gen 5?
Can a green gas pistol us a co2 hpa mag
Should but I am sure it depends on the gun
can you do this to a drum mag?
Yes you can. I did it to my gas one I used to have and it worked.
Are the mags you are using the same as a m9 mag?
Not that I know of
Can you put this on a extended mag?
Yes u can
Do you need a regulator
Yes
put on teflon tape
Kl l
What tank and regulator is that?
Ninja regulator and ninja 3000 psi 72 cu tank
Can I use a similar setup to tap
magazines to a small propane tank instead of hpa?