Some Daban kits are difficult to assemble, and the most of them have problems with loose parts and occasionally extremely tight fittings, so if you're building one for the first time, you'll be OK as long as you have patience and put in extra work.
Some Daban kits are difficult to assemble, and the most of them have problems with loose parts and occasionally extremely tight fittings, so if you're building one for the first time, you'll be OK as long as you have patience and put in extra work.
It looks like this kit is begging to be panel-lined with all that great detail in the plastic. My concern would be if the gold paint would be OK to line with pour style markers? Same with the grey plastic... is it ABS so you cannot use such liner pens?
@@DOMAKI_official yes I would agree with that.. its just that Daban have a habit of using old mold so I afraid that this one will have the same problem like Minna.. the thing is, those hard snapfit are on the joint or other moving part, when I sand it, it will be faster to loosen up.. But I'll admit, the color on this one is so beautiful.. the gold is better, the white is sooo charming..
snapfit must make big hole for male because this coating issue from daban,and many loose part,but this kit its great looking,i cancel to buy this and get astray noir from mjh
hi can i ask something? im in the process of building this right now. and i notice in panel G no.5 doesn't have anything on it is that correct? thanks!
thank you so much also for the support,. 😊 No, you do not need to sand the peg on the backpack that attaches the wings because the tightness of that peg is fine, and you also need that tightness because the wings are a little heavy. As a result, the tightness will be a huge help in achieving some stunning poses.
I’m back to ask more questions haha, I’m almost ready to start building the Amatsu Hana that’s been on my backlog, what pieces do you recommed to sand down and look up for? Should I trim peg holes too and which ones should I beware. Thank you so much man! Hopefully we get a red dragonics soon
@@kitler9416 make sure to at least remove all the fold paint from the pegs connecting the joints, then try the articulation before sandwiching the pieces together to see if they move, if they are too tight sand again and repeat. That would be the most important thing to take care of this kit as it is its one major gripe
@@Dank-lk2mk Thanks for the tip, I did that went I make the left hand with the spare part but I overdid it a bit . So its a bit loose but I fixed it with a bit of double tape. At least it wont break again now , I hope:v
Quick question. Did you experience any bad smell or fumes from the plastic runner? Lately, I heard a rumor that the Chinese bootleg kits use harmful plastic materials that could cause a cancer.
underrated youtube channel 👌👌👌
I appreciate that! thank you 🤜🤛🙂
Love it. Thanks for the build 👍👍👍👍👍👍👍👍👍👍👍👍😀👍👍👍👍👍👍👍👍👍👍
Thanks 😊
Nice build bro. Im also a gunpla builder and also a gunpla vlogger. Nice asmr and stop motion builds
thanks bro. I also check your channel. nice content also. 🙂
Thank you. You make me want to buy one😂
Beautiful ❤
Thank you! 😊
hi, i build mostly bandai but i really want this. will i have a hard time building it? thanks
Some Daban kits are difficult to assemble, and the most of them have problems with loose parts and occasionally extremely tight fittings, so if you're building one for the first time, you'll be OK as long as you have patience and put in extra work.
Some Daban kits are difficult to assemble, and the most of them have problems with loose parts and occasionally extremely tight fittings, so if you're building one for the first time, you'll be OK as long as you have patience and put in extra work.
Any idea where those foil stickers and decals go? I can not find any guide or anything online
I have no idea either. But if I find a guide on decals, I'll let you know.
It looks like this kit is begging to be panel-lined with all that great detail in the plastic.
My concern would be if the gold paint would be OK to line with pour style markers? Same with the grey plastic... is it ABS so you cannot use such liner pens?
In my opinion, it is not needed to panel line the gold areas.🙂
Can you tell me about snapfit in some important joints like elbow, hip joint?
Do we need to fix it to make it fit or not?
It's a little tight for the elbow part, so sand it a little but not too much so it doesn't come loose. Apart from that, everything is fine.
wow looks amazing i regret not buying it now :(
It's a great kit. for the price. Good luck, and I hope you get one.
I'm really bad at displaying gundam. But this thing always looks great
Un inaabangan ko .. ❤️❤️
Is the frame compatible with the amatsu mina version(black version)?
I'm not sure because I don't have any experience building the astray mina, but by the looks of it. and it's the same, and the same brand daban
nice build and review..like always..good job bruh...👍
thank you bruh,.😊
Is this one have some crazy hard snapfit like the old Mina?? Because what I look is the frame and runner is really identical..
On this kit, I didn't have much of a snapfit problem. Perhaps because newer Daban releases are more build friendly than older editions.
@@DOMAKI_official yes I would agree with that.. its just that Daban have a habit of using old mold so I afraid that this one will have the same problem like Minna.. the thing is, those hard snapfit are on the joint or other moving part, when I sand it, it will be faster to loosen up..
But I'll admit, the color on this one is so beautiful.. the gold is better, the white is sooo charming..
snapfit must make big hole for male because this coating issue from daban,and many loose part,but this kit its great looking,i cancel to buy this and get astray noir from mjh
Great review! But I would like to ask if the gold parts are undergated? If not, how did you avoid the gold partgetting damaged?
The gold pieces are not all undergated. Simply cut it with a nipper without using a hobby knife or sandpaper, as the gold paint will be removed.Thanks
Thanks buddy. Dream come true.😂😂 Thank youu so much. All the best and keep going. Will support you more.🤩
Thank you so much; I really appreciate it.🙂
Wow so nice ❤️
Thank you 🙂
Does this kit includes water slide decal? planning to buy it if yes.
Yes it cone with that
Oy new content nanaman ganda
Is it straight build?
yes, straight build,.🙂
Oh nice.I am looking forward to having this kit.sure won't regret it.
can u transform the hana to just a standard gold frame astray?
yes, it has a different right arm to make it look exactly like a standard gold frame astray.
Is this dabans metal build version?
yes,. It's a daban model.
hi can i ask something? im in the process of building this right now. and i notice in panel G no.5 doesn't have anything on it is that correct? thanks!
Yes, as far as I recall. It believes it is a manual error.
Guide for decal ?
Please do Avalanche Daban MG
Avalanche exia has received a number requests. I'll make a video on it soon, bro. stay tuned🙂
I really really love your videos, thank you so much for this
Would you recommend sanding down the pegs that connect the wings to the backpack?
thank you so much also for the support,. 😊
No, you do not need to sand the peg on the backpack that attaches the wings because the tightness of that peg is fine, and you also need that tightness because the wings are a little heavy. As a result, the tightness will be a huge help in achieving some stunning poses.
I’m back to ask more questions haha, I’m almost ready to start building the Amatsu Hana that’s been on my backlog, what pieces do you recommed to sand down and look up for? Should I trim peg holes too and which ones should I beware. Thank you so much man! Hopefully we get a red dragonics soon
@@Dank-lk2mk Anything that I should look up for when building this kit? I already broke its left hand, good thing there was a spare part.
@@kitler9416 make sure to at least remove all the fold paint from the pegs connecting the joints, then try the articulation before sandwiching the pieces together to see if they move, if they are too tight sand again and repeat. That would be the most important thing to take care of this kit as it is its one major gripe
@@Dank-lk2mk Thanks for the tip, I did that went I make the left hand with the spare part but I overdid it a bit . So its a bit loose but I fixed it with a bit of double tape. At least it wont break again now , I hope:v
Hi I was planning to buy this is there any issue in this kit like the plastic is fragile or fitting issues
just be careful on the arms section those are to tight, you might loose it a little. the rest is great.
nice vids sir!
those pose are so epic! too bad for.me not buying this kit. its too white!! love the reviews....😘
thank you.. the kit is great worth to buy
Where did you snag this at? I looked it up and all I find it on is AliExpress
same ng mga nubs kay amatsu mina, hindi ko alam pano mareplicate ganyang kulay ng gold sa tamiya spray paint, wala kasi akong airbrush.
I got the bowl you have
Yung psycho zaku na mg magka daban sana.......daban bake naman....
This kit is near impossible to find nowadays...
MG Daban 8822 00Qant next please?
Soon.
Do ur handa hurt makeing the gundam
a little, it's no hurt compared to other first release kits of daban
Quick question. Did you experience any bad smell or fumes from the plastic runner? Lately, I heard a rumor that the Chinese bootleg kits use harmful plastic materials that could cause a cancer.
in my part i didn’t experience those kind of stuff, you can wash the parts before building it.
Im lossing my I12 part :((
Lods ano yung mga loose part neto? Nag plan po kase ako bumili hehe dko pa alam kung eto or strike freedom fighter daban eh
so far sakin, wala ako loose part dito,. advise ko lang is parehas naman ok pero mas build friendly si astray hana compare sa freedom 🙂
@@DOMAKI_official thank you sir eto nalang bibilhin ko hehe
Tools name/brand reveal plsss