Make Hovercraft
Вставка
- Опубліковано 12 жов 2010
- www.hovercraft.org Please Subscribe. Find us on FaceBook at / hovpod
Hov Pod make a wide range of hovercraft from HDPE and Carbon Fibre / Kevlar composites, for commercial, rescue, patrol and leisure / rental applications. From 1-2 seater thru to 6 seater. Hov Pods are easy to use and maintain, we ship to all countries. Top speed up to 40 mph. Full engine and hull warranty - we fit safety features not found on other hovercraft, for example, front and rear fan guards, kill cords. CAD/CNC design and engineering provide excellent components built to last with minimum downtime. We have rejected the engines, skirt materials used by other suppliers, example, we don't use glass fibre, neoprene coated nylon skirts, or Hypalon - ask us and we will explain why. See our hovercraft guide at • Hov Pod Review - Навчання та стиль
We designed the Hov Pod to be easy to drive, so did away with unnecessary levers and controls. You have left and right steering by handlebar, and throttle twist grip to go faster, on switch, off switch. The trim is set to be optimised in the factory, we fit anti plough skirts.
Hovercraft are weight dependent vehicles, so many people make them out of very thin glass fibre, which we do not think is suitable for hovercraft over rough terrain, like concrete, tarmac, on the beach or over ice, so we use HDPE or Carbon Fibre / Kevlad composite. WE used to use glass fiber, but no longer do so.
Cleetus Rocks!
what fan dia., thrust lbs., blade pitch, and blade count did you eventually find optimal, against vehicles dry weight, and load capacity within the power plants engineered power band r.p.m. range? I'm inquiring about these design characteristics primarily due to a desire I've to build a h/c, / ground effect based variant of my own for quite some time now. Until such time arrives ripe w/ sufficient accumulation of aerodynamic efficiency test proofs I'm just gathering as much advice as i can.
So...what do you do?
I work in a hovercraft factory.
...awesome.
Hovercraft are not difficult to build we supply sub assemblies, but recommend you come for training - you probably don't save a great deal making your own hovercraft once you factor in time, tools and overheads.
how does water not get into the hull through the holes when you stop on water? I am considering building a hovercraft and really need to know thanks.
hey we are plannin for a project,and we are makin the body with a 12 mm ply and using a bag skirt and are approximating weight to be 100-120 kg includin the person sitting engine etc.just want to know what type of fan should be used and what thrust should be produced?please try and reply fast
it looks so easy. is it?
well thats easy i should build my own but what engine should i use 3hp or 6 hp
Is it Maintainance free.. What about drive assembly?
do you have a hole:hull size:wind speed ratio?
There is a flaw in the way they designed that hovercraft when it comes to the steering.
The steering fins are too wide so you don't get as much control as you should.
Go look at the way the back of the hovercraft is set up and you'll see that the steering routers are too far apart.
Other than that it's a pretty cool design that you can't use that if you're building a humbling because it doesn't supply enough air underneath the skirt for taking off the water surface.
cold i also use glass fibre to make the body
we r planning a project for wt. 100-120 kg including passenger.how much power is required to transmit it and what should be the dimension of the platform??????plz suggest us something.
After visiting several hovercraft manufacturers, I must say this outfit seems the most professional and their craft have a little more attention to detail and a more fettled finish. I'm kinda regretting buying a Marlin 3 from 'Flying Fish' in Kent, now known as 'British Hovercraft Company' They're clearly not on par with 'Hovpod'
Hi manos3790 - thanks for the comment, we appreciate your feedback, hope you can check out our updated website at www.hovpod.com
Totalmente de mais
Salve mãe natureza . Ela promete e cumpre . salve 🙏.
Hi, we are unable to assist directly on self assembly, but you should be able to get help through hovercraft club forums by searching on the internet. We do offer a local assembly version of the Hov Pod but we are not familiar with your engine, we recommend Rotax and Weber Automotive engines for high power, low weight essential for hovercraft as they are weight dependent vehicles.
Imagine a girl with long hair, getting entangled in that fan.😳😂😂😂😂
how much the engine will cost????
Please contact us via www.hovpod.com for engine pricing in your currency, thanks
You need a more powerful engine, at least 60 HP with high power to low weight ratio.
Hi, what is the material for light weight of the body? could it be a home made material?
huu thanh tran Hello, the Hov Pod SPX TCC model is made from HDPE or High Density Polyethylene, a molded hull, so this process is very expensive to set up. We do sell partially assembled hulls for local assembly, but on condition that customers attend a 3 day training course in the UK. Our other hovercraft is manufactured from Carbon Fibre / Kevlar and HDPE. For more info contact us via www.hovercraft.org
thanks Hov Pod Hovercraft, it is a great help, i know how to caculate engine power, fan flow, air cushion flow, tube, bag and finger skirt design, but i dont know how to mold the hull using HDPE and its procedure. can i have more details about the procedure to mold the hull? thanks a lot.
good
What material do I use for the skirt?
How much does it cost? Where do I get it? thanks =)
Muito bom 😃
There are two different spellings for aluminum, or in Europe aluminium. The English from England use aluminium, our American cousins who claim to speak English, get a few words wrong, but that's ok, we still understand them most of the time.
Awesome!
how much does this one cost and for hawaii
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
We do offer a pre assembled version should you wish to complete locally, contact us for details via our website hovpod dot com
is it hard to build that i would like to
We use polyurethane / anti rip weave nylon 375 gsm, having rejected neoprene coated nylon which degrades via exposure to UV (Sunlight) - we also rejected Hypalon which tears too easily. We now supply skirts for hovercraft so please contact us via hovpod dot com for more information
where can i buy one of these ?
Please contact us via www.hovercraft.org, thankyou
also do you need any type of license to drive one ?
I need some information, where i can buy that propeller. because in indonesia i can't find it
For pricing please contact us via www.hovpod.com, thank you for your interest.
Cleetus brought me here.
and how much the price for that propeller
usahovercraft.com/mem/index.cgi?hazusa
Maybe this might help
tjjjbbjjkkolmliku los fcF cv, b cb, h; v :; : :,; ::; "
y x8?; 9*()2$45$/$----,; -
This could've been a better vehicle but the engineers stopped at fun.
JOnnyㅂ
My hovercraft is full of eels.
No Sorry
How we make the Hov Pod Hovercraft, see more at www.hovercraft.org
This is as much "making" a hovercraft as putting frozen food in the oven is "cooking"
Lol
toats real
THERES NO i AFTER THE n IN ALUMINUM FFS
Yes there is. 🙄