DIY Build the original airlift for your pond
Вставка
- Опубліковано 7 жов 2015
- many people waiting for this video, DIY your original airlift system, al the first test are made with Koivrienden a Dutch website
I show how to build the air lift with the best results between flow, the vidéo go step to step slowly that you can understand all the different steps
Sorry for us bad English but we have done us best, if you have any questions, you receive the answer in youtube, I hope that you enjoy this video
Patrick from www.aquatechnobel.be and www.atbtv.eu - Навчання та стиль
Thanks for going to the trouble of making and publishing this video, and for doing it in English, its much appreciated!
thanks for your comment
Thanks for taking the time to put this up in English. I've built a mini version for my small outdoor aquarium. Just tweaking it to get more flow into my overhead sump whilst keeping it as quiet as I can. Was looking for a cheap to run pump that would also massively oxygenate the water for my goldfish. Thanks again gentlemen.
welcome
This is the ultimate Airlift pump tutorial! I am excited to use this on my next pond.
Cheers!
+Joel Patrick Sarmiento enjoy it
Great video. Step by step. Nice Pond too! Thanks for the video.
Fantastic idea! ❤️
Thank you for all the hard work,,,, 👍👍👍
thanks a lot for this project from Austria!
Great video easy to understand. Thank you from Ireland.
thanks
my next koi pond filter project thanks for sharing
Thank you for doing this in English!!
Good job guys ! Thanks for sharing !
+Drusus Nero thanks to watching
Very nice video, thank guys!
Thank you very much, extremely well done!
Wow great content my friend ,thanks so much for your efforts
Great job! Thank you!
great to see and hear this in English...
This will solve a lift problem I'm having. Thank you.
nice
Hello,
very good job - congratulation!
greetings
Roland
+koiroli thanks
+koiroli thanks
formidable un grand merci!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
thanks you very much. i like this may be i want to try create..
Thank you
Thank you gentlemen! Great design. Do you think that the pressure chamber design is more effective than an air stone? If so why. I am very interested. Do you have a schematic on your website on this design?. Why is it important to have the air vent “T” in the outflow line? Lot’s of question. :)
Thanx for nice share. Kindly calso give directions if we want to lift water 5 feet high thanx
Great video! I've made one with a 120L per minute pump, getting about 15000L/h. Would I get a better result if I split the air into 2 separate airlift pumps a 60L each, or even 3 a 40L each? Thank you
Indonesia hadirr..
Trimakasih opa...
What is the spacing of the gaps between the 1mm holes? Horizontal and vertical spacing please. Thx
Thanks you.
Great and good solution for save energy. How work the airlift in the hard winter ? I live in New York, EEUU the temperature some time is 0 grade F or -12 C. THANKS
no problem in Belgium my country it is the same, this winter -15°C and all works very well
Great teaching but never found the hole drill pattern link...
many tanks from colombia
I wich you the best from Belgium
Is there any problems with back pressure? My air pump will sit 2 ft higher than outlet of airlift
My one improvement to this - leave 1/2 the diameter of the riser tube (2” or 50mm) at the bottom end.
Here you cut 3-4 half circles out so that the riser sits firmly on the bottom of the pond and still “sucks” water!
Hello guys, great video and your English is perfectly understandable 😄. I’ve tried to find the link for the pdf hole download but am struggling. Please will you provide a direct link. Many thanks, Michael
merci d'avoir fait cette vidéo en anglais. Où puis-je trouver le modèle pour les trous de la chambre?
I am considering using an airlift in my aquaponics tank. My problem with your design is that my tank is much shallower (about 4' or 122 cm). Will this work if I make the 4" pipe 40" long?
I noticed the pipe being used is the grey pvc pipe. In the states, the most common pvc pipe is white. Only electrical conduit and/or schedule 80 PVC is grey. Is this different in the EU?
Actually very easy to understand. I'm going to try this, where can I get the print out to drill the air holes. I've been to the Dutch site so this was very good. Thank you.
+Larry Pardi I have a prob with this paper !
take a graph paper and make 4 rows of holes
Offbeat of one row each verry ease to do and set him on the pipe and dril the 1mm holes
+Aquatechnobel Thanks again, I was able to make this sheet very easily.
+Larry Pardi yes I think the same, to build 7 airlift and at the same time make the video in two languages, 2h works, ease to build, ease to use, lot of flow and low consumption, another tip is to use at the outlet of the airlift small as possible length of pipe to return to the pond !
let me now your results
Thank you. That was very well done. I was wondering though if you could show how the air pump connects, as that fitting does not look like the house that comes off of my air pump. And could we get the link for the hole template. Thank you
+Kathy Desjardins the template is pretty easy to make without the link. If you have graph paper or access to a spread sheet application. Create four columns and put a single capital 'X" on each row and alternate the X in the next column, then print it out and tape it to the 4 inch pipe and drill.
+Larry Pardi that's it
Larry Pardi Can you please post a pic of the grap you made, that way it will be easier to understand for me.
VERY NICE .....
thanks
Hi, thanks for the great video. Question: i currently run my system on pool pump,- all tubing on 50mm (inlet and outlet to filters and bubble bead filter . I REALLY want to move to the airlift system. Can I use this sytem with a reducer to keep my filters? (ie: from 110 mm to 50mm). Will the flow rate be too negatively impacted? appreciate any advice....
no no way to do this !!!!
were is it at??
Music for the reducer cutting please?
+Aquatechobel Congratulations!
Do you kow if it works for 3m high ? and how much is the flow and the power that should I have for the airpump? Do you know if improve the flow if I reduce the diameter ?
Thank you Very Much
no way for 3m hight it work only in gravity !
Good video but no lift in water ... both water levels are same... where the lift
You don't need lift, just circulation
[10:28] Aqui van las perforaciones en el tubo grande.
[16:26] Aqui no hay perforaciones en el tubo grande, quedo sellado. ¿?
Saludos, desde Torreón, Coahuila, México.
Hello, the Airlift also works with a DIN125 or DIN160 for more capacity?
yes it is possible but in this case you need more air flow
what is better airlift or pump for small pond ? ( water l/h , elecricity euros / year )
AIR LIFT
Igor has had abit to much vodka ,,, nice job guys
Wow
performence? et consommation?
nice job^^
thanks
what is the purpose of those small holes inside compressor?
TO MAKE BUBBLES INSIDE THE TUBE
@@aquatechnobel is the air being pushed in the tiny tube or is it providing suction? Thank you
can i drill the vacuum chamber as small ass 0.3 mm?
yes you can do, but it change the result in the bad way for the flow
Hello, how many liters of airlift brings at 1.70 meters depth at 40 liters airpump ? Thanks
20.000 L/h
Excuse me sir, I want to know the type of air pump you use? thankyou
20L per minute
Aquatechnobel what makes it so powerful with only 20 liter/minute? Thank you
the size of the pipe and the physic
Aquatechnobel oh thank you sir
When will the English version of this video be put online?
i do my best I do no more
😁😁😁
A great friend query, until what maximum height can I get with this system, I have a well of 100 meters and want to know if I can extract the water at that depth ... thanks.
yes just need powerful airpump. Look up airlift water pumps on youtube.
Good, but why to use this airlift pump if you can move water just connecting with a tube, the difference of level is very low (if exist) , no need a pump at all
60 liter per minute??
you can start at 20l/min I use 60l/min air pump
Where is the file ?
I have question that I have emailed to your email, it would be great to hear your opinion?
Los tornillos deberían ser inoxidables
Excelente vídeo
Will this work on a smaller scale, 2” or 3” main pipe at the most 5’ long?
yes with less flow
I have a 500 gallon garden pond.
@@collinblake9957 nice
It’s a snorkel of a sub
Sell me one!!!
4:09 the next time i am cutting PVC with an angle grinder, the porno soundtrack will help
En français messieurs s’il vous plait. Et l’anglais laisse à désirer
il existe une version Française de cette vidéo
lol the dude doesnt even hold the grinder the right way lol and thats a timber hand saw not for plastic lol hahahaha