I have same steering wheel controls as you show on Pumpkin PX30 head unit with two handsets for L and R. One control works fine and can be mapped, other handset not recognised at all. Have checked all wiring and even changed CR2032 battery in handset. Any idea why one handset works and other doesn't? Maybe handset defective, but any way to reset or check receiver . Removiong from power and reconnecting doesn't help. Ideas? Thx.
Question. Once you have learn a steering wheel control, is it possible to use that button from the navigation and it will act as it has been pressed? I'm asking because the original radio unit has some functions that are specific to it and I wonder if I can still use it after replacing it.
Whether you use the steering wheel control button or the original button, the function is the same. It's a parallel function, not a replacement for the original key.
Hello Jayson Sun, I wanted to know about that exact model remote that you are using. How long has it lasted you so far without changing batteries and are you actually able to change the battery yourself? Thank you.
I’ve owned the same exact steering wheel control button module that is used in this video and have had good luck with it. Bought it on eBay about 2-3 years ago (2019) and it’s still working fine. Battery life is fine and haven’t had to replace it yet. It feels cheap, but works perfectly for paying so little and doing what I need it to do
hello, i recently acquired a chinese multimedia via Aliexpress branded Hoxiao 4g Ram and 32g Rom (the newest) to install on Renault Fluence Gtline.the non-media interface didn't work. I put a Faaftech interface and then I managed to configure and save the steering wheel sound command settings. But right after saving the configuration I enter the radio and/or music via USB, I can't change the volume, track and change any option saved during the configuration. The question is, is there anything else to be done to be able to operate the controls on the steering wheel? Thank you in advance if anyone knows about it.
Xtrail 2015 raise, steering wheel buttons work but I want to add the DISP button since my previous original radio could switch to the cameras in front of the car but I’m not able to use them since I switched to android
I have Pioneer DMH-A340DAB and don't have in menu an option for Steering Wheel control ( in settings ) . The unit have a 3.5" jack SWC and i have the cable with Key 1 and Key 2 and Ground. Do you believe if i conect ONLY the wires ( Key 1 , Key 2 , Ground , 12V ) will work ?
Nice video.....How can I configure the steering wheel buttons on a Ford Escape?...I installed an identical one but I have not been able to configure that option...can you help me?
I am trying to program my android to the steering wheel controls. But I am having problem with the volume +/- the unit is seeing them as the same. + has a resistances value of 3000hms and - is 150 ohms. I have a spare switch and the resistances are the same so the switch is fine. Has anyone had the same problem and did you solve the problem.
Greetings, I have this radio model and only the bottom of MODE works, volume and skip do not work I have tried to do this process but it only detects the MODE button, is there any other solution, my car is a Toyota Yaris Hatchback 2014
after i installed the steering wheel key, it ran very stable until i turned off the engine and restarted it, it automatically changed the function of the keys. every time like that i have to reinstall it again, you know the cause of the head and how to fix it please show me. thank you
Hello, asked the remote and the cable installation was correct but there were 2 buttons next and mute didn't work, did you install the wrong cable on the line or the remote module had a problem with the 4 buttons running smoothly, the phone +, -, back but next and mute didn't work
Thanks for this awesome video and instructions! Question: Is there a way to disable the beeping sound when you press the volume up/down or mute button on the steering wheel?
Hello I recently installed Apple play in my car but streeing functions dosent work technicians says you need device for that but I don't know which device is that can you help plz?
hi I brought android Same the on you have it on your UA-cam about wireing to steering wheel my first guestion reverse camera cord connect to android have too wire must be connected to the model where exactly and the blue wire from power cord connect to the android should be connected to auto antenna power where do I find this I have a bmw E46
Hi jayson, I had a guy wire my cable up for a Nissan JUKE the unit turns OK but the steering wheel controls just keep saying setup failed, he said the wire Key 1 and 2 might need swapping around (he said they are the steering wires) i swapped them but still setup failed any idea
Hi! I have the same unit. It comes with Key 1 and 2, red and red with green stripe color wires respectively. I connected it to the blue and white wires from my vehicle steering wheel control wires but same problem, set up failed. Can you please help me to make it work?
I've already set up my steering wheel control, mode button to mode, but it only can switch to USB music only, on my other car with diffrence android HU, mode button, can switch many fiture, radio, usb music, usb video
Control Module: A. Red Line ACC+ = OK B. GND Wire Black Ground Connected = OK C. Orange D. Grey From the Head Unit Wiring Only Key 2 is Available How can i Activate?
Hello, i have YT5760B stereo and i am facing some issues after its OTA update steering control function not working properly and front camera function not working from steering learn option.
Hey jayson I have the same aftermarket radio as you and I recently restarted it and now my steering function and the side lights on the stereo don't turn on I tried the pressing the buttons but nothing happens plz help
Hello My radio android 2 din version 10 don t go on my volvo v70 2001 . I connect k1 to green cable And k2 to white cable of original radio and don’t work, reverse the connections and get the same result nothing appears on android monitor .
I want to buy this item, but i doubt can use on my Android Head Unit when i play youtube application. I think this item just can control Mp3 or Mp4 on flashdisk/microSD. So i ask you about that?
Hi, I am using the same software on my 2din. However on my ford kuga 2013 only the steeringwheel up and down volume works and left or next song. The rest will not work by the way you do this. Says cannot learn. Do you have a solution?thanks, John
Buenos días,. Tengo ese problema, no me funciona avance y retroceso en aplicaciones de reproductores audio y vídeo que descargue, .... Pero en las aplicaciones propio de la unidad Android si funcionan todo normal.. que será?..
Hi. I have got exactly the same unit and I have bought the interface CTSVX007 But its not working. I have conneceted key1 key2 Gnd but no respond. Will you let me know please
@@jaysonsun1321 I'm adapting a 2015 corolla steering wheel to a 2007 corolla, the steering wheel comes with 6 connections one of them is ground thus, I'm not sure with which connection goes with what for the analog receiver that I purchase?
Learning worked fine for me for short press. Is there also an option for long press of the sw controls to get a 2nd function, similar I was used to at a Pumpkin head unit?
For my car Subaru Legacy 2005 R3.0 was little bit hard to find car wires for connecting to Steering wheel buttons, but just got it done. If you know where to find them, then connection is easy. Check this link to find Subaru wires, an connect them to navigation wires (key1 and key2) - ua-cam.com/video/_HWEtChXeDE/v-deo.html (orange/white connect to ground as well)
@@jaysonsun1321 i have same system on my radio. when i want to set the button it says failed. when i connected radio buttons workeed , only next and previous button is changed. were can be the problem that i cannot assign new button?
@@notfreename if the next and previous button is ok ,then the remote control may not suit to your car perfectly .maybe check another general remote control .and double check the wire connection
@@antonioaguilar4588 If replacement is required, the housing may need to be removed. I think this should be a disposable shell material, and it also uses button batteries.
Can you do the same process for prius mk2 , non jbl version?
is the SWC learning not to control the original steering wheel in the car but your additional wheel? so confusing
I have same steering wheel controls as you show on Pumpkin PX30 head unit with two handsets for L and R. One control works fine and can be mapped, other handset not recognised at all. Have checked all wiring and even changed CR2032 battery in handset. Any idea why one handset works and other doesn't? Maybe handset defective, but any way to reset or check receiver . Removiong from power and reconnecting doesn't help. Ideas? Thx.
did you figure it out? i have the exact same problem
Same problem here. In my case, sometimes different buttons are recognized as being the same...
I have this problem some bouttons are recognize d the same@@rafaelmartinati
Question. Once you have learn a steering wheel control, is it possible to use that button from the navigation and it will act as it has been pressed? I'm asking because the original radio unit has some functions that are specific to it and I wonder if I can still use it after replacing it.
Whether you use the steering wheel control button or the original button, the function is the same. It's a parallel function, not a replacement for the original key.
Hello Jayson Sun, I wanted to know about that exact model remote that you are using. How long has it lasted you so far without changing batteries and are you actually able to change the battery yourself? Thank you.
I’ve owned the same exact steering wheel control button module that is used in this video and have had good luck with it. Bought it on eBay about 2-3 years ago (2019) and it’s still working fine. Battery life is fine and haven’t had to replace it yet. It feels cheap, but works perfectly for paying so little and doing what I need it to do
@@Haffmatthew cool! thanks for the info and reply
@@Haffmatthew hey Matthew..do the buttons have lights? If yes what colour please..thanks
Thank you for the vidoe, you should do more
hello, i recently acquired a chinese multimedia via Aliexpress branded Hoxiao 4g Ram and 32g Rom (the newest) to install on Renault Fluence Gtline.the non-media interface didn't work. I put a Faaftech interface and then I managed to configure and save the steering wheel sound command settings. But right after saving the configuration I enter the radio and/or music via USB, I can't change the volume, track and change any option saved during the configuration. The question is, is there anything else to be done to be able to operate the controls on the steering wheel?
Thank you in advance if anyone knows about it.
Hello, Did you get it?
Which wire or device have to buy for connecting android player to stearing wheel controls button?
about the device ，please contact with your supplier.
Xtrail 2015 raise, steering wheel buttons work but I want to add the DISP button since my previous original radio could switch to the cameras in front of the car but I’m not able to use them since I switched to android
I have Pioneer DMH-A340DAB and don't have in menu an option for Steering Wheel control ( in settings ) . The unit have a 3.5" jack SWC and i have the cable with Key 1 and Key 2 and Ground. Do you believe if i conect ONLY the wires ( Key 1 , Key 2 , Ground , 12V ) will work ?
You Should Try, Cause I dont have those cables on my radio, but having mute and ad... control and anothere with control
Nice video.....How can I configure the steering wheel buttons on a Ford Escape?...I installed an identical one but I have not been able to configure that option...can you help me?
I am trying to program my android to the steering wheel controls. But I am having problem with the volume +/- the unit is seeing them as the same. + has a resistances value of 3000hms and - is 150 ohms. I have a spare switch and the resistances are the same so the switch is fine. Has anyone had the same problem and did you solve the problem.
Hello, is it possible to connect to any car radio cd player or it must be car navigation, android
suitable for any car radio CD.chcek the cable ,if it can support it
Thanks bro.. it helps me a lot!
welcome
Greetings, I have this radio model and only the bottom of MODE works, volume and skip do not work I have tried to do this process but it only detects the MODE button, is there any other solution, my car is a Toyota Yaris Hatchback 2014
after i installed the steering wheel key, it ran very stable until i turned off the engine and restarted it, it automatically changed the function of the keys. every time like that i have to reinstall it again, you know the cause of the head and how to fix it please show me. thank you
I have seat ibiza 6L, I've wired steering to key1 and nothing detected, key2 neither. Do I need to change factory settings?
i can't understand
Great canbus is built in?
Where do you wire that 2 wires in Ford edge 2009?
Hi friend. Bought this same unit for BMW E46 and have Can Bus Decoder. Steering wheel buttons don’t work. Do I need to wire something?
yeah ,check the wire carefully ,the label on the wire list every function about it
Hello, asked the remote and the cable installation was correct but there were 2 buttons next and mute didn't work, did you install the wrong cable on the line or the remote module had a problem with the 4 buttons running smoothly, the phone +, -, back but next and mute didn't work
double-check the cable connection.it must be something wrong in the cable .the + and other button different cable
Thanks for this awesome video and instructions!
Question: Is there a way to disable the beeping sound when you press the volume up/down or mute button on the steering wheel?
It is an alarm sound itself, and I don't know how to cancel it
In the stereo configuration it appears: "Beep On/Off"
Where it can be purchased
how many will you buy ? personal use or retailer?
hi, can you help, i have this item and fitted it but my android radio wont even recognise its connected,
Hi, I have T6 model. Is possibile Select and setting Type and Model of my Hyundai i30 2011 ?
Please help me.
I have not User Manual.
Hello I recently installed Apple play in my car but streeing functions dosent work technicians says you need device for that but I don't know which device is that can you help plz?
hi I brought android Same the on you have it on your UA-cam about wireing to steering wheel my first guestion reverse camera cord connect to android have too wire must be connected to the model where exactly and the blue wire from power cord connect to the android should be connected to auto antenna power where do I find this I have a bmw E46
can i use this to remote android tablet or phone without use that bluetooth receiver?
does it work to any android player?
The video content is so excellent, congratulations
what point is the battery ?
My car is 2009 lancer. I have the same stereo. How do i connect steering wheel controls to stereo?
check the video ,link the cable as i showed in it .
of course,no need of them ,i send set it as example ,link the wire with your real car
How to change the battery? Where it is situated?
Hi jayson, I had a guy wire my cable up for a Nissan JUKE the unit turns OK but the steering wheel controls just keep saying setup failed, he said the wire Key 1 and 2 might need swapping around (he said they are the steering wires) i swapped them but still setup failed any idea
mention the step，did you press the button first ,then press the screen?
@@jaysonsun1321 no I pressed the the screen then held the button down like it saus
Hi! I have the same unit. It comes with Key 1 and 2, red and red with green stripe color wires respectively. I connected it to the blue and white wires from my vehicle steering wheel control wires but same problem, set up failed. Can you please help me to make it work?
@@ruel9798 you need double check the wire connect at first .and then send me the video to describe it
Please share where to get it, and what headunits is it compatible ?
I've already set up my steering wheel control, mode button to mode, but it only can switch to USB music only, on my other car with diffrence android HU, mode button, can switch many fiture, radio, usb music, usb video
sorry，It may be that different cars have different compatibility.
Some of his extensions may not be well demonstrated
I couldn't find the lebels of key1 and key2on my android connecting wires? How to find please?
How do edit the home page. I want my apps in it not the ones preset
Can you change bmw on unit to a ford?
i can't
Hi I have this same screen, how do I connect wiring?
Hello, i do not have a key1 on the wire harness.
Only Key. How can i Connect
Control Module:
A. Red Line ACC+ = OK
B. GND Wire Black Ground Connected = OK
C. Orange
D. Grey
From the Head Unit Wiring
Only Key 2 is Available
How can i Activate?
my kenwood ddx716wbt dun hv steering wire cable,so how？
how ? for what?
describe your question in detail
@@jaysonsun1321 only hv wire red and black，so wire key 1 and key 2
my kenwood dun hv
@@kjw7482 check with your supplier .
My android head unit dont have steering learn option. What to do now?
steering need contact with your car for first time
Hello, i have YT5760B stereo and i am facing some issues after its OTA update steering control function not working properly and front camera function not working from steering learn option.
How much for this device. Will deliver this product to my place?
address zipcode ATTN
quantity model
bos..my android player same as your tutorial video..but my android not function for steering wheel button 😢 can you teach me how to setup this 🥺
maybe check it with the seller who sold you
@@jaysonsun1321 emm already ask..he said not function ..but he advertised support steering wheel 😢 pity me..
@@izzueizham9296 😀why not try a new car .
@@jaysonsun1321 new car? u mean?
@@izzueizham9296 try whether the function can be used
Hi Where can I buy this device?
Thank you
What is the canbus for bmw x3 e83 ?
So far not working
Thank you
God，BMW is Super high level ，i suggest you to use BMW original device.
Jayson Sun hello, I have added the same android screen with canbus, which configuration canbus I have to choose ?
@@mooseloose2037 confused about your question
Jayson Sun in factory settings what canbus id I choose ?
My android in may car sir i cannt touch the screen anymore so what i need to do speciall those botton at the left side
Hey jayson I have the same aftermarket radio as you and I recently restarted it and now my steering function and the side lights on the stereo don't turn on I tried the pressing the buttons but nothing happens plz help
Why in the setting I can't find this one? I have android 10 car screen?
Hello
My radio android 2 din version 10 don t go on my volvo v70 2001 . I connect k1 to green cable And k2 to white cable of original radio and don’t work, reverse the connections and get the same result nothing appears on android monitor .
hmmmm...
@@jaysonsun1321 any information o solution to solve this problem? Tks
@@fernandomoreiraify my pleasure.
When I learn the steering in unit, it works for sometime and doesn't work sometime,what to do
take a view of the video ，mention more details please
I am using nissa sentra 2017 model in that multimedia password is asking for advance options
Remote control can be use on UA-cam Application?
the remote control IS image your wheel control
So can use on youtube application, is'n it?
@@edowardo222 what 's your final means that you want ot express?
I want to buy this item, but i doubt can use on my Android Head Unit when i play youtube application. I think this item just can control Mp3 or Mp4 on flashdisk/microSD. So i ask you about that?
@@edowardo222 the item same as your android phone function . all the APK can be install according to your different request
Hi,
I am using the same software on my 2din.
However on my ford kuga 2013 only the steeringwheel up and down volume works and left or next song. The rest will not work by the way you do this. Says cannot learn.
Do you have a solution?thanks, John
hmmm
hmmm
it's hard to explain, i suggest you to check the cable connect.
Buenos días,. Tengo ese problema, no me funciona avance y retroceso en aplicaciones de reproductores audio y vídeo que descargue, .... Pero en las aplicaciones propio de la unidad Android si funcionan todo normal.. que será?..
In setting i have not found steering control.
Can modified for my head unit ?
Try to scroll down
What stereo is this?
Hi. I have got exactly the same unit and I have bought the interface CTSVX007
But its not working. I have conneceted key1 key2 Gnd but no respond. Will you let me know please
double-check the video,especially mention the label mark no the cable
@@jaysonsun1321Question, What is that small rectangular unit having three connections one gray, red and black?
@@eddyboh2723 That's the remote receiver. This is an analog car receiver. You have a real receiver in your car. It's on the steering wheel.
@@jaysonsun1321 I'm adapting a 2015 corolla steering wheel to a 2007 corolla, the steering wheel comes with 6 connections one of them is ground thus, I'm not sure with which connection goes with what for the analog receiver that I purchase?
can you install a long distance control?
Learning worked fine for me for short press. Is there also an option for long press of the sw controls to get a 2nd function, similar I was used to at a Pumpkin head unit?
How to conect with normal radio Kenwood km229?
More important is the cable matching than the key instalation.And you say nothing about it
Hi i have my is key 2 whe my connet in the harness Honda accord 2013 ex
then ，any problem？
@@jaysonsun1321 i don't know where my connet the key 2 in the car harness
@@videntemusic2465 god，that's your car，you need ask professioner for the car
@@jaysonsun1321 ok
@@videntemusic2465 yeah，i'm not familiar with different car setting
Thankay yar
Do you have part link please?
For my car Subaru Legacy 2005 R3.0 was little bit hard to find car wires for connecting to Steering wheel buttons, but just got it done. If you know where to find them, then connection is easy. Check this link to find Subaru wires, an connect them to navigation wires (key1 and key2) - ua-cam.com/video/_HWEtChXeDE/v-deo.html (orange/white connect to ground as well)
sorry，I'm not familiar with your car
Im not asking for help, im explaning how to do it to them who has the same car. Cheers
@@sparkijs Thanks very much
I tried but coming msg 'Valid operation some key not complete learning' please guide
its not working for me why i did everything right the wires but not working????
Hi my steering wheel controls are not working .when I open sterio found cables are broken .kindly help me to fix it
contact with your supplier to send one more cable in the next order .
i only can offer the software method
Can you please share me steering wheel control receivers cable picture so that I can re solder it.
@@jaysonsun1321 please share wiring picture
@@arunkumar0703 contact with your supplier please who will send you the different remote control ,the wire is accessories of it
DONT FORGET TO INSTALL THE BATTERY. no where in the instructions does it mention anything about a battery. Spent hours wasting my time on this.
I have the same android head unit like yours can we update the android os
year ,just ask your supplier to send you the software
It doest light those botton at the left anymore on my car android sir and i cannt even touch the screen so i used mouse please help me sir thank you
what can I do...
@@jaysonsun1321 what do you recomend sir how can i fix it sir
@@zergsb757 sorry, actually i didnt understand
My android dont have steering wheel learning , i have connect everything..
double check
Hello I have my arduino display and I added the wheel volume control but is not working, I found the option in the display but how to activate it?
it need learn after contected
I tried doing that and i always get setup failed error, what could be the problem?
send me the video ，that you set it
Jayson Sun I dont know how to..
@@cherryfeliciano6164 message me WhatsApp：+8613826525442
@@jaysonsun1321 i have same system on my radio. when i want to set the button it says failed. when i connected radio buttons workeed , only next and previous button is changed. were can be the problem that i cannot assign new button?
@@notfreename if the next and previous button is ok ,then the remote control may not suit to your car perfectly .maybe check another general remote control .and double check the wire connection
I like it but I hate the clicking :\
Adakah link ya bos untuk tombol stir universal
Does the Lee work
lee？
@@jaysonsun1321 led sorry
Bro its not working in uno minda . Please make a video on it .
sorry i m not familiar with uno minda
Wires not understood
How make battery change?
what battery ?
do you mean the remote control?
@@jaysonsun1321 yes the piece at the wheel steering
@@antonioaguilar4588 If replacement is required, the housing may need to be removed. I think this should be a disposable shell material, and it also uses button batteries.
@@jaysonsun1321 ok, thank you so much.
@@antonioaguilar4588 my pleasure
Yo my screen is dark how can I reset the brightness
what's wrong ?is the screen broken ?contact with your supplier check the products itself at first
@@jaysonsun1321 screen not broke it Went out just like that
Awesome work, we will be at Knowledge Fest please check us out.
thanks
@@jaysonsun1321 can you tell me resistor values that android expects ?
i have this radio but steering wheel learn not in list ?
the steering wheel learn is in the factory set mother list
can you show me where exactly to connect wires?
check the mark on each label,
Not work
Mine worked but now it doesn't, i followed your steps and won't work
I use Toyota bit it not learn
Bad really bad answer
what‘s the question，and answer what ?