@@Clutchclips_ for pure perofrmance no nvidia is worth over amd but the new 4070 ti super is arguably more valuable than amds that compete in same category
Since other people have already mentioned the motherboard and case size, I will point out a couple of other things. First of all, that intro lmao. You don’t need an anti-static wrist or ankle bracelet; EVER! Second of all, you want to install the gpu last so that it doesn’t interfere with installing all of the bottom connectors and io cables. Also, you can do your wiring and psu cable management last and connect everything then. Great video overall.
Very very solid first build! Great choice on parts for the price and for going the extra bit with the cable extensions to tie the white color scheme together. Well done!
The build looks awesome, great job! I would add 2 of the fans in the bottom as intake, the other 3 up top as exhaust, and then use the extra one to replace your rear exhaust so all of your fans will have RGB. Also, you could route your gpu cables through the cutout closer to the glass if you wanted to give it just a little bit of a cleaner look. That way there isn't so much of the cable showing in the case. And one more thing, maybe look into getting just a cheap gpu ant-sag bracket or stand to keep the gpu from sagging at the end. But, all in all it looks sick man!
Optimal air cooling setup would be 1 at the top towards the back and 1 at the back for exhaust. The 3 fans up front of the case are enough as is, but if you want extra gpu cooling you could add the fans above the psu cover
Nice build! Let me point out some things: You were using Thermalright for the CPU cooler brand, good pick! But you could of gotten a 360mm AIO from them for about 60-70 bucks, yes that is a bit overkill for a 7600x but for the price does it matter? Second thing, nice case but you could of gotten a fishtank case that's dual chambered (which are some of the most popular cases right now) for only 120 bucks with 7 pre-installed ARGB fans! The case is the Antec C5 ARGB, you could get it in white or black and its on the smaller side so it would of looked better paired with the Micro-ATX motherboard you chose, not only that it could fit an additional 3 fans! That's 10 fans in total! But it's all up to preference.
@@jimg.9198 Yea the Thermalright Peerless Assassin was to big and covered up the ram so I got the smaller Thermalright King 120 SE which i found out does just as good👍
Great first build my man, looking at it retrospectively there are definitely some changes i would have made to the build. 1. Matx board should preferably never go in an atx case. 2. Get the 7500f instead of the 7600x as you wont be using the built-in-graphics and the lower tdp will help the cpu cooler keep up better in more stressful situations. 3. With the money saved by going with the 7500f instead of the 7600x you could potentially upgrade to the RX 7900 GRE, depending how lucky you got with the price on the 7500f.
@@niloydx468 if you put everything tg right it shouldn’t look bad but you can prolly watch a YT video of smb using that case. Here’s a chat that can help discord.gg/pchh
the only thing i would change is the motherboard, as the itx motherboard doesnt look that good in the full atx case, but if youre on a really tight budget or dont care about aesthetics its absolutely fine. Overall great choice of parts, especially for a person with no experience. Hope you enjoy your new rig!
Great hold, my dude! The only thing I personally would have changed would be to get an MATX case instead of an ATX case. That way there’d be less extra space around the MATx motherboard. But that stuff is super confusing for first time builders and that’s exactly what I was in September 2023 when I built my first gaming pc. Enjoy the ride, my man!
Sweet looking build. A few recommendations because it says no experience, I would turn on an xmp or docp profile to have your RAM work at advertised speed, enable above 4g encoding and resizable bar all in the bios settings. And in advanced graphics settings update your refresh rate to match your monitor refresh rate.
This build in theory is good, but I would've gotten a terabyte of storage from crucial for like 75 bucks and get the 7900 gre instead of the 7800 xt. Newegg offered a deal with half a terabyte of storage included with buying 7600x
You just don’t kno how long I was going around trying to figure out the best pc build to buy for my budget, wish you would’ve saw my content sooner but I’m more than happy with the PC.❤
Make sure to install drivers from the motherboards website and install adrenaline and your motherboards software to change rgb and fan speed, of course enable xmp in bios and install smth like 3dmark or cinebench and monitor temps through adrenaline.
Make sure to install all the appropriate drivers and software (such as adrenaline) and benchmark your pc using smth like cinebench or 3dmark. Watch your cpu/gpu temps in adrenaline while benchmarking
You don't need any more fans. You've got enough. Too many and you'll be pulling air out before it has a chance to cool anything. I might swap the rear fan for one of the rgb ones though so all the fans light up. Sweet build otherwise. 👍
great vid nice build !!! try to avoid installing the GPU before the board goes into the case..... too much wiggle on the PCI socket ..... i understand a preboot before install but try to use the on board GPU if your board has that function. respect !
@JustinDuhe the sag isn't as bad as people make out. It's the flexing and motion that just cannot happen. I bracket cures both of these in one go ! Get a cheap woohan one ;)
I don't want to sound rude but why not atx motherboard instead matx motherboard? Cuz the caze support atx motherboard is it bcz no stock of white atx motherboard?
respect for using amd gpu and not wasting money on low end nvidea card
i mean if dlss ray tracing or shadow replay is important for somebody it is justified to pay extra 50-100
@@hurri9633 50 - 100 anything below the 4070 ti super is not even worth buying
@@Clutchclips_ for pure perofrmance no nvidia is worth over amd but the new 4070 ti super is arguably more valuable than amds that compete in same category
@@hurri9633 thats what i said if you can't buy the 4070 ti super or higher just buy amd
@@Clutchclips_nah my 4070 super been just fine
I was kinda tired and the music plus you calmly putting it together just made me relax...h ...👍
Good to hear! Trying to make the best content I can.
for someone with on experience you did a great job picking the parts
Thank you, I was scared I was gon post this and get different recommendations on what I should’ve done💀
great job ! Definitely should do more projects like this building the experience you have
Yeaa I’m working on it, thank you for your feedback !!🙏
Since other people have already mentioned the motherboard and case size, I will point out a couple of other things. First of all, that intro lmao. You don’t need an anti-static wrist or ankle bracelet; EVER! Second of all, you want to install the gpu last so that it doesn’t interfere with installing all of the bottom connectors and io cables. Also, you can do your wiring and psu cable management last and connect everything then. Great video overall.
Install gpu last and also the first to be taken out in case im upgrading my rig. Is that right?
@@Sarcaustik Depends on what you're upgrading...
Very very solid first build! Great choice on parts for the price and for going the extra bit with the cable extensions to tie the white color scheme together. Well done!
Thank you👾
The white builds are amazing.
@@dath-ez1kl I’m tryna tell you
I know
Underrated AF! Good job!
@@itsgalacticc thank you your comment is very appreciated !!!
@@JustinDuhe np man👍
Looks sleeky. I would add fans if you can, doesn't hurt if you already bought them
Really good vid and great parts you picked
@@IonL69 thank you🙏
The build looks awesome, great job! I would add 2 of the fans in the bottom as intake, the other 3 up top as exhaust, and then use the extra one to replace your rear exhaust so all of your fans will have RGB. Also, you could route your gpu cables through the cutout closer to the glass if you wanted to give it just a little bit of a cleaner look. That way there isn't so much of the cable showing in the case. And one more thing, maybe look into getting just a cheap gpu ant-sag bracket or stand to keep the gpu from sagging at the end. But, all in all it looks sick man!
Thanks for the tips! I will be doing do that!!🙏❤️
Optimal air cooling setup would be 1 at the top towards the back and 1 at the back for exhaust. The 3 fans up front of the case are enough as is, but if you want extra gpu cooling you could add the fans above the psu cover
Nice build! Let me point out some things: You were using Thermalright for the CPU cooler brand, good pick! But you could of gotten a 360mm AIO from them for about 60-70 bucks, yes that is a bit overkill for a 7600x but for the price does it matter? Second thing, nice case but you could of gotten a fishtank case that's dual chambered (which are some of the most popular cases right now) for only 120 bucks with 7 pre-installed ARGB fans! The case is the Antec C5 ARGB, you could get it in white or black and its on the smaller side so it would of looked better paired with the Micro-ATX motherboard you chose, not only that it could fit an additional 3 fans! That's 10 fans in total! But it's all up to preference.
Very nice build! Congrats. I like that cooler.
@@jimg.9198 Yea the Thermalright Peerless Assassin was to big and covered up the ram so I got the smaller Thermalright King 120 SE which i found out does just as good👍
Nicely done. Looking in to trying to build my first pc, ya make it look pretty easy
@@daveyingram8934 it is pretty easy, just takes longer since it’s your first time. Good luck !!
The hardest thing is doing it the first time you can learn from mistakes and make it better next time, but your first will always be special 👍
@@diegorivadeneira8129 spittin facts
Your PC look fabulous different colors changing lights
@@miznataly01 aesthetics matter
Grrat going on your build.
@@johnpaulbacon8320 Preciate it
Sick looking build, W video
@@Douzey_ thank you bro
Great first build my man, looking at it retrospectively there are definitely some changes i would have made to the build.
1. Matx board should preferably never go in an atx case.
2. Get the 7500f instead of the 7600x as you wont be using the built-in-graphics and the lower tdp will help the cpu cooler keep up better in more stressful situations.
3. With the money saved by going with the 7500f instead of the 7600x you could potentially upgrade to the RX 7900 GRE, depending how lucky you got with the price on the 7500f.
@@thescoffe I wish I would’ve knew before
I have an m-atx board and ordered an Antec C8, will the aesthetics look bad ? If yes, then is there any way i can minimize that ?
@@niloydx468 if you put everything tg right it shouldn’t look bad but you can prolly watch a YT video of smb using that case. Here’s a chat that can help discord.gg/pchh
Great job bro!
@@algcc thank you !!
Mad respect for uploading this and Amd my boiiiiiii
Yea I heard amd was the way to go for more of a budget build. Ik abt future proofing to but I feel like my next pc gon be a whole new build anyway😂.
the only thing i would change is the motherboard, as the itx motherboard doesnt look that good in the full atx case, but if youre on a really tight budget or dont care about aesthetics its absolutely fine. Overall great choice of parts, especially for a person with no experience. Hope you enjoy your new rig!
Yea it was the best one for its price, I was looking to switch if you watch my short but it don’t look that bad plus ima add bottom fans
Great hold, my dude! The only thing I personally would have changed would be to get an MATX case instead of an ATX case. That way there’d be less extra space around the MATx motherboard. But that stuff is super confusing for first time builders and that’s exactly what I was in September 2023 when I built my first gaming pc.
Enjoy the ride, my man!
Yeaa Foreal 😂I was abt to send everything back and do a full restart at one point .. but I’m happy how it came out overall !
In my opinion it doesn’t even look that bad and also you can vertical mount it too,
@@dartsyFN thank you and I might in the future
Sweet looking build. A few recommendations because it says no experience, I would turn on an xmp or docp profile to have your RAM work at advertised speed, enable above 4g encoding and resizable bar all in the bios settings. And in advanced graphics settings update your refresh rate to match your monitor refresh rate.
Thanks for the tips! I did the XMP thing but I didn’t do the other stuff.. appreciate that!
Great have fun bro.
You literally have the same components that i bought off Amazon a week ago
@@AdamJapaly W parts
Post notifications always turned on waiting on the next video bro 🔥
Hey man nice build do you need an editor by any chance
not atm, but thank you
Good shiT lol. If u care I would put something like ur utube logo in the empty space. Nice vid
Preciate you !!
This build in theory is good, but I would've gotten a terabyte of storage from crucial for like 75 bucks and get the 7900 gre instead of the 7800 xt. Newegg offered a deal with half a terabyte of storage included with buying 7600x
You just don’t kno how long I was going around trying to figure out the best pc build to buy for my budget, wish you would’ve saw my content sooner but I’m more than happy with the PC.❤
@@JustinDuhe well, that's the end goal
Make sure to install drivers from the motherboards website and install adrenaline and your motherboards software to change rgb and fan speed, of course enable xmp in bios and install smth like 3dmark or cinebench and monitor temps through adrenaline.
Make sure to install all the appropriate drivers and software (such as adrenaline) and benchmark your pc using smth like cinebench or 3dmark. Watch your cpu/gpu temps in adrenaline while benchmarking
@@1_x409 ohhh okay ima do homework on that
what did u wear on ur leg bro? the blue thing?
Anti static band
I wanna build a PC with a 800 - 1000$ budget and not sure where to start
discord.gg/pchh can help you! Watch Linus Tech Tips and Techsource to help you when you build.
@@JustinDuhe thanks dude
Pcpartpicker
nice build bro
did you update bios on first start?
@@ArtVandelay77 yea I’m pretty sure
What is the blue thing you connect to the powersupply do? I dont understand please reply ❤
@@UraiwanYodho Anti-static wrist band. Some say you need it, some say you don’t. I wasn’t taking no risks😂.
@@JustinDuhe what does it do beacuse i have ordered a powersupply its coming tomorrow
@@UraiwanYodho it’s for safety so you don’t fry your components.
you did good but in the start of the video the psu thing is useless
@@v3ku I wasn’t takin no risk
u rlly didnt need that 750 psu, unless u r planning to upgrade big in the next 3 years
My last power supply died on me so ian risking it.
You don't need any more fans. You've got enough. Too many and you'll be pulling air out before it has a chance to cool anything. I might swap the rear fan for one of the rgb ones though so all the fans light up. Sweet build otherwise. 👍
@@damac2k2 thank you for the recommendations
Great build,,, just, for a little bit more money i would go with 7800x3d and be good for years! Enjoy your build!
@@Kliq-n2s thank you
you want me to break in and take this bx rn or later?
@@mrrawdawg Ima put a tracking device in it, gon get it right back😂😂
great vid nice build !!! try to avoid installing the GPU before the board goes into the case..... too much wiggle on the PCI socket ..... i understand a preboot before install but try to use the on board GPU if your board has that function. respect !
Yea I also need a bracket to hold up my GPU from the sag
@JustinDuhe the sag isn't as bad as people make out. It's the flexing and motion that just cannot happen. I bracket cures both of these in one go ! Get a cheap woohan one ;)
Nice video i subed
@@WeWuWa thank you for the support
@@JustinDuhe Yeah thank you for making this cool video!
Looks good!
I don't want to sound rude but why not atx motherboard instead matx motherboard?
Cuz the caze support atx motherboard is it bcz no stock of white atx motherboard?
@@ikram2512 the motherboard I chose is better than the ATX motherboards in my price range, plus the white aesthetic.
Im thinking abt making my first PC build around $800 - $1000
@@ItsWafflesMC Go for it! It’s not as hard as people make it out to be in my opinion. discord.gg/pchh this Discord can probably help you!🙏
get a gpu sag bracket so that it doesnt sag
Bet
I have a asrock motherboard too
@@Joshbeatsaber wwwww
Thanks
He could put gpu later and put the motherboard first then put the gpu
@@kawserjahan4240 I put it in first to test it, I lost the footage of me taking it out and putting it back in after
would if been better with a used 3070
My first build so idk frl
@@JustinDuhe yh but your build is solid well done u did a great job
cool
🤩🤩🤩🤩
Can anyone give their opinion on my PC? I've already got everything everything, except the GPU. It's arriving in like 9 days
CPU: AMD Ryzen 7 7800X3D 4.2 GHz 8-Core.
CPU Cooler: ARCTIC Liquid Freezer III 56.3 CFM Liquid.
Motherboard: MSI MAG X670E TOMAHAWK WIFI ATX AM5.
Memory: G.Skill Trident Z5 Neo 32 GB (2 x 16 GB) DDR5-6000 CL30.
Storage: Western Digital WD_Black SN850X 2 TB M.2-2280 PCIe 4.0 X4 NVME SSD.
Video card: XFX RX-79GMERCB9 Radeon RX 7900 GRE 16 GB.
Case: Lian Li LANCOOL 216 ATX Mid Tower
Power supply: MSI MPG A850G PCIE5 850 W 80+ Gold Certified Fully Modular ATX.
Nice looking Pc + Video, Thumbs up.
@@zhostfu3595 discord.gg/pchh
🔥🔥🔥🔥🔥
AMD FOR THE WIN!!!
Cool
Bih tuff
nice
Using washed parts
@@S2G-FC shid it work for what I need it to do
Okay I see ya !!!!
Nice but you didn't show if you put any thermal paste on the CPU that's very important I hope you did. 🥱😓🥵😁👍
@@kenbad8271 it’s a small part but at 7:53