Nice one Denis. That's very impressive. Looks like a great tool for automotive work at a good price. No excuses not to get into oscilloscope use particularly with the Hscope app which is excellent as well. 👍😁
Great Video. Waiting on mine. Its in the Mail. I am so exited. I didn't know you can adjust the PWM pin . Hscope keeps getting better. Yesterday I just found out the audio alarm feature on the cursers. Used it to alarm when my O2 went full rich. I used a Bluetooth headset so I could hear it over the engine.
Thanks for the video, I bought this and now I rarely use my pico scope. Its very convenient since i have the Hscope app installed on my launch scan tool, i dont have to carry an extra laptop or a big scope.
these are Martin's oscilloscopes...all his design yes, 4 channel scope is discussed and some work has been done towards it very difficult and time consuming especially with the low noise standard he imposes upon himself one day, I think we'll see one
For a while Martin had the price around $995 as a place holder on the website. I 100% was fully ready and anxious to pay that to have my own HSXXX as I was one of the guys that didn't have the time to source material and build the hs402.
Really would love to see a 4 channel version with appropriate sample rate. FYI, I do have a four channel Hantek which I use with the automotive module and it works ok but I would like to have a four channel HScope device. Keep doing the great work guys, really appreciate it.
It would be great if you could ask Martin about adding wifi. It would be a no-brainer in that case. Without wifi, there isn't much of a benefit over other cheaper alternatives for me. Automotive work is not very picky about a little bit of noise in the oscilloscope anyway.
I was thinking of making your dynamic balancing tool but using the HS502 instead. in theory I would need to power the accelerometer and photocell then run the signal wires to the probes?
easy and can perform well follow GADGETS#58 and substitute LOTO OSC482 with HS502 instead same analog ADXL335 accelerometer and same analog IR sensor...power them with 5v supply
Man if you could make a way to hook up 3 of those scopes thst would be amazing for vfd troubleshooting being able to measure viktage and current of each phase off each unit comes out more affordable than flukes offering, as well as the bluetooth ablity would reduce the hazards because you dont have to be in front with the cabinet open
HScope has channel labels which should not be confused with presets. HScope has no presets as such. HS512 does come with the Automotive Module license included which is a continuous stream mode
HS502 is only supported by the Android HScope app some people run Android emulators on their laptops and install HScope that way...I am not a fan of doing this
4 channel has not met Martin's noise level criteria...on hold at this time many of us are hoping project will get picked up where left off and hopefully not in too distant future
Looks like just what I need. Without wifi, how does this connect to a phone or table? Bluetooth? What else would I need to record ignition-off current draw? I have a problem with intermittent drawdown, and unfortunately it only seems to happen every week or two. Will Hscope record up to a weeks worth of current values? Thanks.
I have a question , the 502 is not available . The 512 is however. It has a bigger input voltage but can it be used as good as the 502? Thank you , if so I will order one today. I am very satisfied with the hscope but use it on a 1008 so definatkey looking to update the scope .
Hi. I like it but for me even a diy person needs a minimum of 4 channels these days. So i think if Hscope can develop a 4 channel it will sell! Keep up the awesome content
Came here and subscribed after watching the Parasitic drain video on Ivan's channel. Been wanting a scope for a while but the costs are nuts especially for someone like me who just wants to dabble in it as a hobbyist. This set up looks to be right up my alley, but sold out. Ugh... So I've been binge watching your videos. Great content! Keep up the great work!
there is a 3rd production run of the HS502 ongoing...it will get re-stocked before long (a couple weeks or so)...worth the wait, IMO thank you for your generous comment
I am curious as to how the HS502 or HS512 would display a narrow pulse at 8 times per revolution. For example in the Video 'Don't be Fooled! Crankshaft sensor vs Oscilloscope" Mechanic Mindset UA-cam channel?
I've never scoped that type of crankshaft sensor but from Darren's video I can tell the pulses are 1ms apart and that HS502 is capable of measuring that the $4000 PICO would have more time on screen of course but bottom line is HScope + HS502 (HS512) could do it
if you're referring to the overlay, you can toggle between 720 and 360 there is a HScope app GUIDE found here: www.martinloren.com/hscope-guide/ and of course there is HScope Telegram group for more info
Anyone know how to measure current draw with this. I see Marten has an attachment listed on his website but it doesn’t seem to be for sale and the video describing it is gone.
easiest method is to use a 1Ω 100w resistor (add a fuse holder) in series with NEG battery post and negative cable have HS502 measure the voltage drop across that resistor... that drop will = the current in circuit
Thanks so much! Is there any way to set it up so the car can still start and run while measuring the current (and so I don't have to constantly connect and disconnect the negative lead)? A shunt maybe? @@theGADGETSplaylist
@@theGADGETSplaylist thank you for your quick reply, what else do I need for have fully power of the HA502, in a video that you made it show like 3 levels of software and you said that are new improvements but they have to be purchased, I am new to a oscilloscope, never used one before, so I am learning from your videos and others as well, I am very happy with the HS502 and I want to be able to do any test. Thank you very much for your help.
Hi, I have been unable to log in the website of the link you provided to know about the product and others here for few months. I also asked my brother to log in and he got the same issue. Are we blocked? We live in Taiwan.
I doubt you are blocked and I just now tested the link I provided in this video description box and it worked fine for me here is one that takes us to the main site and hope you have more luck with it: www.martinloren.com/hscope/
@@theGADGETSplaylist Many thanks for your reply and the link although it does the same, busy website or something about Proxy, which I really don't know about. I once logged in, which was many months ago. Since then I have been unable to get it. My internet speed is very slow, but my brother's is not. Both of us get the same issue. I think I will try it again and again some other time. By the way, I think you very much as I have learnt something from your videos.
Love your stuff Denis, thanks for bringing my attention to the HS402 & HS502. What is YOUR preference or everyday automotive purposes - the older HS402 design with the WiFi feature ? or the somewhat more capable HS502 without wifi ? Also under what circumstances would one be better served with a HS512 ?? By the way, new sub here; you're just too thorough & interesting to not catch everything you publish. Thanks.
since HS5xx comes with HScope + Automotive license, is already built and has slightly higher specs, it's the better choice over HS402 HS512 ±32v would be best if you anticipate working on 24v heavy equipment systems thanks for your comment Thomas:)
@@theGADGETSplaylist I'm leaning towards the PicoScope 2204A which is very nearly in the same cost ball park as the HS502 and offers free access to their software. I don't see much on your channel regarding Pico scopes, are you familiar with the 2204A ? and which would you favor ?
@@thomascooper6679 some people try to get their hands on used 2204 just to get access to the PICO library and have no intention of actually using the scope 2204 is an antiquated 8bit oscilloscope (12bit "enhancement" is a digital trick, don't fall for it) ... you will NOT get the low noise, high resolution waveforms of HS502 with 2204 ... HS502 would win out on many other metrics as well PICO is the industry leader at the nose bleed end of the price range not 2204, not present day
@@theGADGETSplaylist hmmm. . . . much to think about. Do you talk about the trick 12bit "enhancement" in any of your other videos ? If not, this might be a good subject for a new video. The HS502 spec sheet also boasts of 12 bit, is it enhanced or is it non-enhanced ?
@@thomascooper6679 these are real ADC vertical bits for HS502 at $100 it's not going to be a big mistake to buy 2204...worse case is you'll end up with PICO access to library being budget minded (that's a good thing), I'll wager the HS502 would soon come next:) good luck with your decision/purchase
218 views and already sold out - so for anyone checking the shop: the item is no longer shown there. You can not find it anymore. I had put one into the basket and before I had been able to purchase it had gone again. a bit too late - I also wonder if he had done the shop on his own cause then the whole mess of EU regulation would hit him during export and customs. Usually aliexpress does a better job to get this done conveniently for all the EU customers by collecting everything upfront so that shipping is now about 10 days from china even during a wartime in Ukraine with all its implications.
don't have to break the bank but I'd stick with a brand name I find LENOVO tablets purchased online directly from their site while keeping an eye out for sale prices is hard to beat
@@TitusHamilton-vc3ez depends on your budget and size preference LENOVO P11 at the high end...nice big tablet with killer display! but 8" tablets shouldn't be overlooked...some people actually prefer this size between a phone and a big tablet becomes a matter of personal preference Titus:)
Ivan was so generous in showcasing the logger. Martin was involved. I was involved. And Jim who stepped up to build the logger and donate it to Ivan was involved. I haven't felt slighted in the least and Ivan really did me a solid here...
my next video is about a new lineup of attenuators to be found on Martin Loren's store these are trim compensated and come in 4x, 10x and 20x 4x would bring HS502 to ±64v working range
No soy la persona que vende estos Martin Loren desarrolla osciloscopios HS y los vende en su tienda online. Aqui esta el link: www.martinloren.com/shop/
Thank you for the information which was looking for. Looking forward to have a one.
great!
thx for stopping by, Ravi
great job!
Good on you for your generosity. I'm with you on Ebenezer, nobody ever sees the other side.
👍👍👍
good luck in draw:)
Nice one Denis. That's very impressive. Looks like a great tool for automotive work at a good price. No excuses not to get into oscilloscope use particularly with the Hscope app which is excellent as well. 👍😁
it sure is Iain
Just got one in the mail. looking forward to using it. Thanks for the review.
good stuff
enjoy:)
Great Video. Waiting on mine. Its in the Mail. I am so exited. I didn't know you can adjust the PWM pin . Hscope keeps getting better. Yesterday I just found out the audio alarm feature on the cursers. Used it to alarm when my O2 went full rich. I used a Bluetooth headset so I could hear it over the engine.
you'll love that HS502 for the type of mobile work you do:)
I think Martin will have his hands full keeping up with the demand for these things!
Bonjour , merci pour la presentation de ce gadgets
regarde #177 Stephane...un concour pour une HS502 gratuite
Another great item from Martin💪🏽
sure is Ramon
you may have to rename your channel Hscope-HS502:)
take care, my friend
Thanks for the video, I bought this and now I rarely use my pico scope. Its very convenient since i have the Hscope app installed on my launch scan tool, i dont have to carry an extra laptop or a big scope.
you'll love it...of this I'm sure:)
Ordered one today, looking forward to using the scope.
👍👍👍
Looking forward to one with more channels. I trust you could come up with one.
these are Martin's oscilloscopes...all his design
yes, 4 channel scope is discussed and some work has been done towards it
very difficult and time consuming especially with the low noise standard he imposes upon himself
one day, I think we'll see one
For a while Martin had the price around $995 as a place holder on the website. I 100% was fully ready and anxious to pay that to have my own HSXXX as I was one of the guys that didn't have the time to source material and build the hs402.
yeah, that raised a few eyebrows...lol
Great info like always Dennis . Mine are arriving soon.
"are" ... as in more than 1
good 4U:)
Yes I order 2 and lots of accessories
Thankyou Denis, one on its way to Tauranga.
good stuff, Grunter!
Selling like hotcakes, With Hscope license and automotive module included that"s quite a deal!
Really would love to see a 4 channel version with appropriate sample rate. FYI, I do have a four channel Hantek which I use with the automotive module and it works ok but I would like to have a four channel HScope device. Keep doing the great work guys, really appreciate it.
there was a lot of work done towards a 4 channel...noise levels not within targets...project on hold at this time
@@theGADGETSplaylist great news, hope the project restarts soon. 😎
Great review 👍🏻
Seems like an ausome scope
good performance and good value, it's the best HScope supported option at this time
of course, we're all looking forward to a 4 channel someday🤞
That would be nice to have a notification list sign up when product will be in stock. Thanks
I will bring your suggestion to Martin's attention
It would be great if you could ask Martin about adding wifi. It would be a no-brainer in that case. Without wifi, there isn't much of a benefit over other cheaper alternatives for me. Automotive work is not very picky about a little bit of noise in the oscilloscope anyway.
I'll forward your message to Martin
and I'll enter you in the draw:)
❤️❤️
I was able to get one looking foward to using it. They are out of stock now hopefully he adds more
early bird gets the worm:)
1st factory run sold like hotcakes...new batch in the oven
@@theGADGETSplaylist awesome I’ll post it on my automotive scan tool group as well. People always looking for this stuff
@@weldingjunkie thank you!
I was thinking of making your dynamic balancing tool but using the HS502 instead. in theory I would need to power the accelerometer and photocell then run the signal wires to the probes?
easy and can perform well
follow GADGETS#58 and substitute LOTO OSC482 with HS502 instead
same analog ADXL335 accelerometer and same analog IR sensor...power them with 5v supply
Looks great I just ordered two of them!!
you should leave some for other people:)
@@theGADGETSplaylist I picked one up for a coworker as well so yes more than one person has one
@@jwoeltje6949 lol...that makes it ok then:)
Lol you pig Jay, just kidding I grabbed the last one. You didn’t let me know haha
@@weldingjunkie I told you about this channel. At least you didn’t miss the party😁
Man if you could make a way to hook up 3 of those scopes thst would be amazing for vfd troubleshooting being able to measure viktage and current of each phase off each unit comes out more affordable than flukes offering, as well as the bluetooth ablity would reduce the hazards because you dont have to be in front with the cabinet open
if only we could "daisy chain" them ... but, there'd be sync issues with that:)
and the ±16v max input would also be an issue...
So no wi-fi option? That was the biggest things for me with the HS402 if I’m not mistakenly referring to something else.
no WiFi for HS502, far as I know...
I gotta HS512 But how do I do the license on it for the automotive presets are slashed I thoght they were included
HScope has channel labels which should not be confused with presets. HScope has no presets as such.
HS512 does come with the Automotive Module license included which is a continuous stream mode
I dunno….You seem to keep pretty busy for a guy who retired @ 53 🤣 Looks like a great product! Cheers Denis 👍
poor Doris does most of the heavy lifting while Trooper and I vie for the lazy title
@the GADGETS playlist Will this work on any Windows software you know of as well as the Android HScope? Thank you.
HS502 is only supported by the Android HScope app
some people run Android emulators on their laptops and install HScope that way...I am not a fan of doing this
Denis, you received some very positive feedback recently on Diagnostic Network my friend!!! Some techs threw up links to your videos!!! Atta boy!!!
nice to hear Paul
thx for passing it on
Only 7 left... well, only 6 now 😉.
Will the Bluetooth module to make this wireless be available any time soon? 🤞🏻
to my knowledge, no plans to make HS502 wireless at this time
Was just wondering what the progress is on the 4 channel HS oscilliscope or if there is an estimated time when it will be released.
4 channel has not met Martin's noise level criteria...on hold at this time
many of us are hoping project will get picked up where left off and hopefully not in too distant future
Looks like just what I need. Without wifi, how does this connect to a phone or table? Bluetooth? What else would I need to record ignition-off current draw? I have a problem with intermittent drawdown, and unfortunately it only seems to happen every week or two. Will Hscope record up to a weeks worth of current values? Thanks.
HS502 plugs into Android USB
HScope voltmeter module can record for 1440 hrs at 1 minute intervals...that's 60 days!
I have a question , the 502 is not available . The 512 is however. It has a bigger input voltage but can it be used as good as the 502? Thank you , if so I will order one today. I am very satisfied with the hscope but use it on a 1008 so definatkey looking to update the scope .
have no fear going with the HS512 with its ±32v input voltage...will serve you well in automotive work
The 512 and a little bag of accessories should be arriving soon. Thanks so much! Couldn't help adding the fuse loops as well, mine are too bulky
@@manelishi13 I get excited when packages finally arrive too
it's the kid in us:)
Hi. I like it but for me even a diy person needs a minimum of 4 channels these days. So i think if Hscope can develop a 4 channel it will sell! Keep up the awesome content
there's a start in the direction of 4 channels...takes time...
I agree! And I want someone to sell the completed WI-FI Parasitic Data Logger as well! Take care! Tom
Came here and subscribed after watching the Parasitic drain video on Ivan's channel. Been wanting a scope for a while but the costs are nuts especially for someone like me who just wants to dabble in it as a hobbyist. This set up looks to be right up my alley, but sold out. Ugh... So I've been binge watching your videos. Great content! Keep up the great work!
there is a 3rd production run of the HS502 ongoing...it will get re-stocked before long (a couple weeks or so)...worth the wait, IMO
thank you for your generous comment
Myself as well
I am curious as to how the HS502 or HS512 would display a narrow pulse at 8 times per revolution. For example in the Video 'Don't be Fooled! Crankshaft sensor vs Oscilloscope" Mechanic Mindset UA-cam channel?
I've never scoped that type of crankshaft sensor but from Darren's video I can tell the pulses are 1ms apart and that HS502 is capable of measuring that
the $4000 PICO would have more time on screen of course but bottom line is HScope + HS502 (HS512) could do it
I'm sorry, but I just got this HS512. And there is no 360 button Does it only work when you have a sink signal on two channels
if you're referring to the overlay, you can toggle between 720 and 360
there is a HScope app GUIDE found here:
www.martinloren.com/hscope-guide/
and of course there is HScope Telegram group for more info
Can the Hscope software be used with the Autel maxiscope?
maxiscope is not one of the supported scopes
Anyone know how to measure current draw with this. I see Marten has an attachment listed on his website but it doesn’t seem to be for sale and the video describing it is gone.
easiest method is to use a 1Ω 100w resistor (add a fuse holder) in series with NEG battery post and negative cable
have HS502 measure the voltage drop across that resistor...
that drop will = the current in circuit
Thanks so much! Is there any way to set it up so the car can still start and run while measuring the current (and so I don't have to constantly connect and disconnect the negative lead)? A shunt maybe? @@theGADGETSplaylist
@@jamesadams7307 you'd need a heavy shunt, able to take the starter amps...but yes, anything is possible
4-12-2023.... What should I expect for a delivery time frame to Portland, Oregon?
ships from Martin's Store in Shanghai and you being on west coast, I'd guess 10 days
I see 9 in stock right now from latest production run
Thanx for the quick response....
I just purchased the ha502, how do I download and purchase the automotive software?
you will find that Automotive license is already included in the HS502
@@theGADGETSplaylist thank you for your quick reply, what else do I need for have fully power of the HA502, in a video that you made it show like 3 levels of software and you said that are new improvements but they have to be purchased, I am new to a oscilloscope, never used one before, so I am learning from your videos and others as well, I am very happy with the HS502 and I want to be able to do any test. Thank you very much for your help.
@@felixmasis3658 pretty much everything you need to get going is already there in HS502 out of the box
Hi, I have been unable to log in the website of the link you provided to know about the product and others here for few months. I also asked my brother to log in and he got the same issue.
Are we blocked? We live in Taiwan.
I doubt you are blocked
and I just now tested the link I provided in this video description box and it worked fine for me
here is one that takes us to the main site and hope you have more luck with it:
www.martinloren.com/hscope/
@@theGADGETSplaylist
Many thanks for your reply and the link although it does the same, busy website or something about Proxy, which I really don't know about.
I once logged in, which was many months ago. Since then I have been unable to get it. My internet speed is very slow, but my brother's is not. Both of us get the same issue. I think I will try it again and again some other time.
By the way, I think you very much as I have learnt something from your videos.
Love your stuff Denis, thanks for bringing my attention to the HS402 & HS502.
What is YOUR preference or everyday automotive purposes - the older HS402 design with the WiFi feature ? or the somewhat more capable HS502 without wifi ?
Also under what circumstances would one be better served with a HS512 ??
By the way, new sub here; you're just too thorough & interesting to not catch everything you publish.
Thanks.
since HS5xx comes with HScope + Automotive license, is already built and has slightly higher specs, it's the better choice over HS402
HS512 ±32v would be best if you anticipate working on 24v heavy equipment systems
thanks for your comment Thomas:)
@@theGADGETSplaylist
I'm leaning towards the PicoScope 2204A which is very nearly in the same cost ball park as the HS502 and offers free access to their software. I don't see much on your channel regarding Pico scopes, are you familiar with the 2204A ? and which would you favor ?
@@thomascooper6679 some people try to get their hands on used 2204 just to get access to the PICO library and have no intention of actually using the scope
2204 is an antiquated 8bit oscilloscope (12bit "enhancement" is a digital trick, don't fall for it) ... you will NOT get the low noise, high resolution waveforms of HS502 with 2204 ... HS502 would win out on many other metrics as well
PICO is the industry leader at the nose bleed end of the price range
not 2204, not present day
@@theGADGETSplaylist
hmmm. . . . much to think about.
Do you talk about the trick 12bit "enhancement" in any of your other videos ? If not, this might be a good subject for a new video.
The HS502 spec sheet also boasts of 12 bit, is it enhanced or is it non-enhanced ?
@@thomascooper6679 these are real ADC vertical bits for HS502
at $100 it's not going to be a big mistake to buy 2204...worse case is you'll end up with PICO access to library
being budget minded (that's a good thing), I'll wager the HS502 would soon come next:)
good luck with your decision/purchase
Can i use Hs512 instead of Hs502!?
yes
only difference is HS512 has higher ±32v input range ... all ok
and for the moment, HS502 not restocked
Precio
218 views and already sold out - so for anyone checking the shop: the item is no longer shown there.
You can not find it anymore. I had put one into the basket and before I had been able to purchase it had gone again.
a bit too late - I also wonder if he had done the shop on his own cause then the whole mess of EU regulation would hit him during export and customs.
Usually aliexpress does a better job to get this done conveniently for all the EU customers by collecting everything upfront so that shipping is now about 10 days from china even during a wartime in Ukraine with all its implications.
Martin got surprised by the demand...he'll get another factory run, test and restock
What android tablet do you recommend for hscope software?
don't have to break the bank but I'd stick with a brand name
I find LENOVO tablets purchased online directly from their site while keeping an eye out for sale prices is hard to beat
@@theGADGETSplaylist thank you sir for your reply.. plz can you send me a link to one that you think would b a good choice..thanks
@@TitusHamilton-vc3ez depends on your budget and size preference
LENOVO P11 at the high end...nice big tablet with killer display!
but 8" tablets shouldn't be overlooked...some people actually prefer this size between a phone and a big tablet
becomes a matter of personal preference Titus:)
@@theGADGETSplaylist ok thanks alot for your advice
How lazy this generation is....
Dang late to the game. Would love to purchase one but non in stock.
You need to drop a note to Ivan PHAD
He gave credit to Martin Loren for your parasitic draw tool
Ivan was so generous in showcasing the logger. Martin was involved. I was involved. And Jim who stepped up to build the logger and donate it to Ivan was involved.
I haven't felt slighted in the least and Ivan really did me a solid here...
@@theGADGETSplaylist ok more details are appreciated
*cry’s in 24v*
my next video is about a new lineup of attenuators to be found on Martin Loren's store
these are trim compensated and come in 4x, 10x and 20x
4x would bring HS502 to ±64v working range
🤭 Promo sm.
Pŕecio por favor para Peru
No soy la persona que vende estos
Martin Loren desarrolla osciloscopios HS y los vende en su tienda online. Aqui esta el link:
www.martinloren.com/shop/
is this blue thoot
no Dan...HS502 is USB connection only
no WiFi version in the works, at least for now