I have a 2012 Majesty and I wanted to know if the factory seat can be changed? I am only 5'2 and I would feel more comfortable if I could touch better while sitting on the seat.
I've got a crack along the mounting base of the windshield on a majesty I just bought. Thanks for the video- doesn't look like too bad a job. Any ideas on where to get a cheap oem windshield?
I removed this plastic panel & windshield to repair a cracked panel (previous owner had dropped scooter on its right side). The 6 winshield screws, 3 each side, are plastic and very sensitive to over-tightening. Also, they cost $1.88 each from BikeBandit, so "word to the Wise:" do not "honk-down" on these screws.
The fastest I rode with it off was 60 MPH, and the ride was about 25 min (my trip to school in morning and back in afternoon). Almost no resistance with the shield on, but my head was getting blown around without it. It was tolerable for me, and I never felt tired from it. Without the shield, it was nice and fun when the temp was around 70 F, but in the mornings it was too cold at around 40-45 F. The temperature factor made me put the shield back on, but I will take it back off in summer.
thx man, these scooters are not common at all in mex, got plenty of expirience on burgmans, but had no idea where to start disassembling the thing, its gonna get a full paint job btw. thank you!!
Do you know how to access the air filter on the passenger side that is behind the footrest panel? I am unable to find any instructions on how to do so.....Thanks!
I know a lot of owners have had some foam shaved from their seat to make it lower. You can read about it on the majestyusa(dot)com forums. Some have also bought after market seats that are shorter.
Thank you. Its ten years later I just bought a 2012 with very low mileage and I installing a tall Givi windscreen.
Sweet
thank you for this information . just removed and put on a better windshield in about 20 minutes . great video
I have a 2012 Majesty and I wanted to know if the factory seat can be changed? I am only 5'2 and I would feel more comfortable if I could touch better while sitting on the seat.
I've got a crack along the mounting base of the windshield on a majesty I just bought. Thanks for the video- doesn't look like too bad a job. Any ideas on where to get a cheap oem windshield?
Thank You. Gonna do mine tomorrow. Thank You for the effort. I appreciate the time that you spent for everyone else.
welcome
Very handy. Thanks. Please do a vid on complete panel removal for the air filters, Transmission fluid replacement, etc. That would be grand!
What kind of screws does it use? I keep searching the web to no avail
I removed this plastic panel & windshield to repair a cracked panel (previous owner had dropped scooter on its right side). The 6 winshield screws, 3 each side, are plastic and very sensitive to over-tightening. Also, they cost $1.88 each from BikeBandit, so "word to the Wise:" do not "honk-down" on these screws.
Yep..they are made to shear off in an accident I think....to help avoid injury. And should be replace with the proper type.
Thank You! Your video was very helpful. I changed my windscreen this afternoon.
The fastest I rode with it off was 60 MPH, and the ride was about 25 min (my trip to school in morning and back in afternoon). Almost no resistance with the shield on, but my head was getting blown around without it. It was tolerable for me, and I never felt tired from it. Without the shield, it was nice and fun when the temp was around 70 F, but in the mornings it was too cold at around 40-45 F. The temperature factor made me put the shield back on, but I will take it back off in summer.
what's wind resistance like now? What does it feel like with wind hitting your body and head vs with the screen on? Have you gone on the highway?
thx man, these scooters are not common at all in mex, got plenty of expirience on burgmans, but had no idea where to start disassembling the thing, its gonna get a full paint job btw. thank you!!
Thank you VERY much for posting this. It was EXACTLY what I needed to see! I appreciate your posting!
Welcome
Sorry, I will not be doing this maintenance because I have a contract with the dealership. Reduced price on all maintenance for 3 years.
Do you know how to access the air filter on the passenger side that is behind the footrest panel? I am unable to find any instructions on how to do so.....Thanks!
No, sorry. The scooters not with me currently
I thought about it too, but I really like being able to see over the windshield at the same time so mine is still stock.
can you do a video on how to change the headlight bulbs
Thanks this video helped me alot .. keep posting majesty videos so I can learn more!
I've been thinking of getting a windshield with the extended sides for my hands.
Excellent informative, simple, clear
Thanks...those hex head screws are the KEY to success. :)
welcome
air filters
/watch?v=w1u9cw3DUmc
transmission oil
/watch?v=kqrXRfcE194
Both are on Lorddarthvader1701 's channel.
He doesn't have much, and he doesn't show the process of what he does. He just talks about what he does.
I know a lot of owners have had some foam shaved from their seat to make it lower. You can read about it on the majestyusa(dot)com forums. Some have also bought after market seats that are shorter.
I'll be posting vids more often. You should also check out Lorddarthvader1701 for Majesty videos.
Lorddarthvader1701 Very poor videos and almost impossible to watch. Best to watch with the sound turned off.
Thank you soooooo much.
happy to help
show me how to find a screw that You can adjust the hight of a light beam in this front lamp ...in Your majesty 400 ....please :)
Sorry I haven't done this. Check out MajestyUSA.com
No, sorry. I have not looked into that.
Thanks my friend
Good vid. Visual helps.
Thanks it helped a lot
You're welcome.
Thanks, Joe, but his vids are no good. He doesn't show removal of any panels. He just shows and talks about what he's going to do.
thank you
In italianissimo vogliamo sentire!!!!!!
Thanks