thanks for the video... I have a question. Is it possible to connect the HMI in two PLC with one IP address? I mean recently I did a test like this. Actually there are two PLC on a machine and I used one for the machine and the other for the automation line but when i connected the HMI the speed too low and when you change a signal physically, the result is shown on weintek panel after 10 seconds. is there any way to solve this problem?
🎉🎉🎉🎉
I did this, but there is no communication between the PLC and the HMI I have tk607iq
How to make simulation between delta ispsoft and esay builder pro ?
thanks for the video... I have a question. Is it possible to connect the HMI in two PLC with one IP address? I mean recently I did a test like this. Actually there are two PLC on a machine and I used one for the machine and the other for the automation line but when i connected the HMI the speed too low and when you change a signal physically, the result is shown on weintek panel after 10 seconds. is there any way to solve this problem?
HI, IM TRYING TO CONNECT MANY DELTA DVP SS2 PLCS TO ONE HMI WEINTEK BY MODBUS RTU, CAN U HELP ME?