Hi there! Thank you very much for the video. So I will have the exact same setup as you do have, but at the other side, I did not get the point why I have to connect to the ISP. On the AP side, the cable goes to the router, so this provides internet access. The AP side will take the address automatically which I assigned (I hope). Then the station Beam will receive and I can connect that station beam to another router, providing the WLAN to multiple devices right? I don't understand the ISP part. I just ordered, but am unsure, if I need more devices on the station side to provide either a LAN or a WLAN connection... When the stuff arrives, I will try to connect the station to a normal router/ access point, so e.g. mobile devices can access and my stationary pc can as well. Do I have to connect/ have anything else/ is the ISP part necessary? Thank you very much for detailing this out :)
Super video and explanations bro,,.I am newly starting Wireless service in tamilnadu, Its very useful for me, I shared video to my collegues also... You did a great job.. Keep doing it...👏👏👏👏🤝🤝🤝🤝🤝 Thanks a lot...
Thankyou for sharing this, your explanation is very detailed. Most of videos about setting up litebeam are very basic. And this video is very helpfull. Thankyou
I’m 350 meters away from my aunt WiFi, if I only buy one Light Beam M5 can I use this to connect to my Aunt WiFi directly to my laptop Via Ethernet port??? Thanks
Vhai mera isp meroko PBE M5 settings karke chala gaya he. Per mereko lagta he ki kuch setting me prb he... Download speed 3.45 around and upload 0.66 around araha he..
This is a very helpful tutorial video. Thank you so much brother for taking the time to explain almost everything in the Air OS. I am your newest subscriber now! you Rock!!hehe
whether it can be a client antenna and station in the indoor, or must be outdoor both without obstacles? how much is the distance between the two antennas and what are the obstacles?
I can’t get the AP to pick up an internet connection. I don’t get the option to login to the ISP via browser like I am supposed to. I even plugged it into an open port on the back of my router that already has access and still no internet. IPs are all in my network range. What did I do wrong or what can you suggest to help. Anything is appreciated. Thanks
G ya access point ka jo booster hai is ko modem wifi ka sath connect karna hai .ya station booster ko modem wifi ka sath connect karna ka, . G answer jaldi dana
I suggest you to use Mikrotik LHG 5 on both client's(Station) and ISP's(Bridge) ends. But for better performance and your budget is good then you can use Mikrotik DinaDish because bandwidth throughput of DinaDish is much better than of LHG 5. Keep commenting and for more wireless networking videos subscribe to my channel. #StayTunned.
Yes you can connect as many devices you need through a router. If you want to connect more than one router (having different PPPOE connections) then you have to check WDS button in Litebeam Configuration. Hope it answers your question. Thanks for watching #keepCommenting. for more videos subscribe to my channel.
Can i use litebeam to connect my laptop via ap mode of litebeam? Or should i make it to station mode and connect my laptop wirelessly..Thank you so much!
Brother currently i am working on income tax department web project tdscpc.gov.in. It may take 2 Months. After that i will create a new series on optical fiber networking.
1-2day after station side data not access reset device connect ap data receive but after 1-2day station side IP not access Then finally reset Karna padta hai how can solved problem
i purchased two cpe510 outdoor cpe in which one is access point and second is client mode i share internet on client side via lan cable on pc i want to connect it with wifi router to share internet a client location whats its setting for wan (wifi router)
Great tutorial. I follow your tutorial but have an issue with the Mac address of all the devices connected to the router connected to the Station. It's getting the Mac Address of the Station Litebeam M5 instead of showing the Mac Address of the devices.
Reset your wireless device and then configure it again by opening 192.168.1.20. if you don't want to reset it then check its correct IP from ubnt discovery tool. Just download ubnt discovery tool and connect your device to your PC/Laptop.
Why is it that when i plugged my AP device to the router, i still coudn't get internet to my station or to the other end. And in your video, you logged in to your broadband service provider. In my case, i have an "always on" internet service, when you plug your cable, you'll instantly get your connection
i am planning to buy ubiquiti litebeam m5, is it possible sir that 2 litebeam can communicate each other even there are so many trees and small mountains?
+ariel rivera you can connect as many stations as you want but litebeam has unidirectional antenna so all the station should be in same direction. That's why 2 litebeams are used for point to point connection . If you want to omnidirectional antenna then I suggest you to use omnitik. Keep watching.. for more videos subscribe to my channel
AP is access point means AP transmitts signals in the form of radio waves. Whereas Station receives Signals from AP. In this way internet connection is established between AP and Station
Thank you so much. One more question. Can we connect head office to other branches within city so that head office can access resources of each branch ?
Yeah it works good. If air traffic is less in your area and also depends upon height of your buildings but you have to configure it as point to point . If it will not works then I suggest you to install uniquiti powerbeam M5.
Hi there! Thank you very much for the video. So I will have the exact same setup as you do have, but at the other side, I did not get the point why I have to connect to the ISP. On the AP side, the cable goes to the router, so this provides internet access. The AP side will take the address automatically which I assigned (I hope). Then the station Beam will receive and I can connect that station beam to another router, providing the WLAN to multiple devices right? I don't understand the ISP part. I just ordered, but am unsure, if I need more devices on the station side to provide either a LAN or a WLAN connection... When the stuff arrives, I will try to connect the station to a normal router/ access point, so e.g. mobile devices can access and my stationary pc can as well. Do I have to connect/ have anything else/ is the ISP part necessary? Thank you very much for detailing this out :)
Perfect Video. I was looking for an easy way to setup this exact configuration and you made if very easy and less than an hour. Thank You! Great Job!
Super video and explanations bro,,.I am newly starting Wireless service in tamilnadu, Its very useful for me, I shared video to my collegues also... You did a great job.. Keep doing it...👏👏👏👏🤝🤝🤝🤝🤝 Thanks a lot...
Congratz. It was such a wonderful and informative presentation. look forward for more. Thank bro for good work
Can you help me how to control bandwith that the station receive in the AP? IS IT POSIBLE 2 STATIONS CAN connect to singGLE AP?
Nanostation loco 2 me tp link ka poe switch 24v 0.5A ka lga skte h koi problem to nhi hogi
Thankyou for sharing this, your explanation is very detailed. Most of videos about setting up litebeam are very basic. And this video is very helpfull. Thankyou
Thanks for watching & appreciating my work.
I’m 350 meters away from my aunt WiFi, if I only buy one Light Beam M5 can I use this to connect to my Aunt WiFi directly to my laptop Via Ethernet port??? Thanks
Dear can u please explain how to do this for LTU XR two of them as Ptp mode for 1.5.2 firmware?
Vhai mera isp meroko PBE M5 settings karke chala gaya he. Per mereko lagta he ki kuch setting me prb he... Download speed 3.45 around and upload 0.66 around araha he..
This is a very helpful tutorial video. Thank you so much brother for taking the time to explain almost everything in the Air OS. I am your newest subscriber now! you Rock!!hehe
Easily the most comprehensive video on the topic for a noob
This really helped me, thank you
Thank you, buh mine on the receiving end the nework speed is soo slow, how can you help?
I connected cameras at access point want to see these at station . Both are connected but camera status is not active.
Hi. I've changed modem where is connected the transmitter . What I've to do now?
Very important and vital information free.Thanks alot Sir.keep the content coming.
can you send a video for Litebeam 5AC configuration for station plz
goog job,,, Brooo,,,,,,,, very Nice,,
Thanks for your appreciation
hi , its good video with details. and its sporting me
thanks.. i have learnt a lot. always i be replaying again and again to be acquainted by the set up
Superb sir... Thanks a lot for your valuable support... It's very helpful for us... Thank you so much ❤️
whether it can be a client antenna and station in the indoor, or must be outdoor both without obstacles? how much is the distance between the two antennas and what are the obstacles?
Arie Nasution distance litebeam can support is upto 10km
SPECTRA TEch ok
Can you connect more than one sender to the receiver and does it effect the speed of the receiver of you do that ?
We can't connect more then one Access points but we can connect more than one stations on one AP
Thanks a lot for the fast reply
Amazing tutorial, much insight indeed.
Thank you so much.
Pls help me with my configration of P2P I am unable to access by nas
Very good knowledge provide and very good teaching skil thank a lot
can we used m5 as only transmitter for fiber internet or it can be used as repater using another router or it need m5 another m5 to used as repeater
This is great. Good job. Another new subscriber added.
Very helpful video. Thanks
It is possible to use free internet with open AP by litebeam m5 ????
I have a question. Sir no any adjustment in the setting for long distance connection..? Tnx
Depends upon your distance between your AP & station. For upto 5km litebeam m5 works. For 5-10 km you have to use power beam
Bhai very good explained. Video upload karte Raho.
Thanks bhai.. keep supporting
I can’t get the AP to pick up an internet connection. I don’t get the option to login to the ISP via browser like I am supposed to. I even plugged it into an open port on the back of my router that already has access and still no internet.
IPs are all in my network range.
What did I do wrong or what can you suggest to help. Anything is appreciated. Thanks
G ya access point ka jo booster hai is ko modem wifi ka sath connect karna hai .ya station booster ko modem wifi ka sath connect karna ka, .
G answer jaldi dana
Someone actually went over most the features in airOS. You will need to know how to find and use... Most just show the basics...
I want to establish p2p within 16km range. Can u suggest me required devices for it please?
I suggest you to use Mikrotik LHG 5 on both client's(Station) and ISP's(Bridge) ends. But for better performance and your budget is good then you can use Mikrotik DinaDish because bandwidth throughput of DinaDish is much better than of LHG 5.
Keep commenting and for more wireless networking videos subscribe to my channel. #StayTunned.
Thanks, Very informative information... how many stations connect with access point in this Ubiqiti Litebeem M5 range...
i m also same setting but my internet not work ? can u help m,e plzz
thank you this video helped me with my ip camera install you rock dude.
Thank you so much for watching and appreciating my efforts.
#StayTuned and for more wireless networking videos subscribe to my channel.
After doing that process we can connect station device with router to connect more devices?
Yes you can connect as many devices you need through a router. If you want to connect more than one router (having different PPPOE connections) then you have to check WDS button in Litebeam Configuration.
Hope it answers your question. Thanks for watching #keepCommenting.
for more videos subscribe to my channel.
Thanks for this video bcs this is very important for me thanks bro keep it up
Always welcome for more videos subscribe to my channel.... 👍
Can i use litebeam to connect my laptop via ap mode of litebeam? Or should i make it to station mode and connect my laptop wirelessly..Thank you so much!
can you share the "secure Wi-Fi WPA-AES or WPA2-AES using handshake method in Kali Linux" video
Thanks for the video, very informative. I will try this set up soon. Will give you feedback once available...thanks again.
thanks for watching my videos and Keep commenting .. & subscribe for more videos
Video ke liye thank u sir
Par muje cctv ip cemera ko Conction wireless kaise kare is bare kuch demo chahiye tha....?
Thanks. I will make seperate video on this.
Thank you sir
Always welcome
.sir when u upload video
Brother currently i am working on income tax department web project tdscpc.gov.in. It may take 2 Months. After that i will create a new series on optical fiber networking.
good, what is the max distance between the two cpe?
depends, the unit i have is 30 km at 450mb
can i connect my litebeam with my nanostatio m2 locco and how? please any one help or witch one is best to connect if i cant connect them together?
Very good explanation. thanks
How much distance will it cover
1-2day after station side data not access reset device connect ap data receive but after 1-2day station side IP not access
Then finally reset Karna padta hai how can solved problem
Check by updating firmware if problem still exists then your device may be faulty. Hardware issue.
Great tutorial
Please tell me different between access point and station
Station is device receiving signal and Access point is sending signal. hope that helps
i purchased two cpe510 outdoor cpe
in which one is access point and second is client mode
i share internet on client side via lan cable on pc
i want to connect it with wifi router to share internet a client
location whats its setting for wan (wifi router)
+Gurmail Singh It depends on wifi router's brand. You have to set PPPOE connection between them.
cool video, please how do i connect from a router to PTP to an aircube? in summary
Great tutorial. I follow your tutorial but have an issue with the Mac address of all the devices connected to the router connected to the Station. It's getting the Mac Address of the Station Litebeam M5 instead of showing the Mac Address of the devices.
just enable the wds transparent mode
Thanks bro good job
thank you for the video its a big help for the beginners
very helpful and well done.
thank you. it's very informative presentation.
When I punch in my unit IP address but it won’t let me in the menu it only says time out
Reset your wireless device and then configure it again by opening 192.168.1.20.
if you don't want to reset it then check its correct IP from ubnt discovery tool. Just download ubnt discovery tool and connect your device to your PC/Laptop.
Spectra TEch thanks I did that and it works
always welcome. Keep Commenting
Thanks you man.
super video sir
sir saan po ba kino connect yung lan ng AP at Station?
I like your video ,, thank you
Another question: after configuring all your Lightbeams, should i return the adapter settings of my computer to "Obtain an IP address automatically"?
Yes you have to change it to "Obtain an IP address automatically" for internet access.
@@SPECTRATEch please may you help me with the ubnt discovery tool
Why is it that when i plugged my AP device to the router, i still coudn't get internet to my station or to the other end. And in your video, you logged in to your broadband service provider. In my case, i have an "always on" internet service, when you plug your cable, you'll instantly get your connection
very very good keep on
Thank you so much. For more videos subscribe my channel.
nice one bro...
Excellent Bro
Bhaiya esmye ka mera band hai usmey 2 hi bas lite bar raha hai 3 lite nahi bar raha hai kayese hoga set
What is use of this lite beam. Can I use in my home and there is no network
very informative. Thank you for sharing
Does it really go till 5km
Congratulations on the job, but I wanted to know if you can do it in French
What is the price of this point link of this Power Beam m5 ???
How to remove the port cover? I'm having hard time removing those covers thry are very stiff
How many -dbm for best and fast speed
Upto -65dbm
@@SPECTRATEch on my device 62dbm theek hn ya nai
Excellent video
+DGM NETF SILCHAR Thanks.. for more videos subscribe to my channel.. & keep commenting.
i am planning to buy ubiquiti litebeam m5, is it possible sir that 2 litebeam can communicate each other even there are so many trees and small mountains?
Honsi band mein kaam karatha Hai?
Sir do u know mikrotik hotspot setting
Stylish Prince yes
thanks for this video how many station i can connect in 1 access point in litebeam m5
+ariel rivera you can connect as many stations as you want but litebeam has unidirectional antenna so all the station should be in same direction. That's why 2 litebeams are used for point to point connection . If you want to omnidirectional antenna then I suggest you to use omnitik.
Keep watching.. for more videos subscribe to my channel
thank you so much for idea and reply
Thank u so much for this video.
+resty libunao My pleasure . If you want more videos on wireless network subscribe to my channel.. #keepCommenting
SPECTRA TEch dear sir please more upload videos on wireless networking and firewall we are very like your videos
+Usman Ali thanks Usman I will definitely upload more videos, thanks for liking my videos.. #keepWatching ,_ #StayTuned
thank you my prend
thanks boss it helps a lot
Thank you so much for watching and appreciating my efforts.
#StayTuned and for more wireless networking videos subscribe to my channel.
i am not able open the login page of lite beam m5 please help me out
good information it is use full
What is Ubiquiti support helpline number in India?
Great video
Very good job and explanation. Thanks!
very thanks to you bro...
What is the difference between router and bridge?
What is difference between Station and AP mode ? Where we connect internet ? AP or Station ?
AP is access point means AP transmitts signals in the form of radio waves.
Whereas Station receives Signals from AP.
In this way internet connection is established between AP and Station
So we will attach internet cable to AP device ?
Yes right
Thank you so much. One more question. Can we connect head office to other branches within city so that head office can access resources of each branch ?
yes you can do that by establishing tower on Head office and use wireless devices on it as per your requirements.
Litebeam needs electric power?
Yeah it needs electric power to work.
thankyou , will try this tomorrow
Lianpher Santiago Always welcome.. for more videos on wireless networking subscribe to my channel.
Can I use this for 5 km
Definitely you can use it for 5Km. If there are no height interference between your devices.
Can it work for 6 to 7 km with full bandwidth upto 15 mbps??????
Yeah it works good. If air traffic is less in your area and also depends upon height of your buildings but you have to configure it as point to point . If it will not works then I suggest you to install uniquiti powerbeam M5.
shehryar prince thanks for watching my video . Keep Asking and for more videos subscribe to my channel
plan to set up my own i let you know and i will ask assistance from you..
No problem, I will be happy to assist you. Comment down your quires. You can also post your question on FB:- facebook.com/techspectra/