Hello buddy i love your video But i want ask you i have kapolite wheel loader k966 Can i use like this sound system on it Or what do you recommend Thx 4 teaching us And sharing with us ....Greatings from Canada
@@tncexcavator2538 I know this. Where you placed the sound module is were the stock 10,000mah 7.4V battery should go right above it. Is there room in there is what I am asking.
Sorry, my Englisch is not so perfect. Must i have 2 Channels free (9+10) bei FS-i6S? Green one on Channel 10, the black, withe and red one on Channel 9? I have the Siren Light on Channel 9, the Flash-Light-Change is on Remute-Control at Key-A1.
Go to function 7 (Aux. Channels) and select the switch to match the channel you are plugged into. The channel that I use with the cable that I plug in Channel 9 is SWC = Engine sound cable. (black-white-red cable line) Channel 10 is SWD = car horn cable. (green cable line) Flashlight : I plugged in the channel named servos on the receiver (But it cannot control It will turn on immediately when the power switch is on)
You must also set the switch and subtrim on the remote control. After installing the sound module 1. Install the sound module 2. Select the switch to match the channel of the sound module on the remote control. 3. Set the subtrim to adjust the engine sound level.
If not successful I'll take a video of the remote control settings for you tomorrow. (My remote control is Chinese, I can't read it. But the function is the same, You can follow my steps.)
@@tncexcavator2538 I got it to start up via the switch but still every time I use the other switch the swd that’s for the horn it just does the police siren
Go to function 7 (Aux. Channels) and select the switch to match the channel you are plugged into. The channel that I use with the cable that I plug in Channel 5 is SWB = pump cable. Channel 6 is VRA = left wheel cable. Channel 7 is VRB = right wheel cable. Channel 8 is SWA = Lighting Cable. Channel 9 is SWC = Engine sound cable. Channel 10 is SWD = car horn cable.
![Kabolite 336GC Upgrade part 2 [LED Switch and cooling fan]](http://i.ytimg.com/vi/3-0T6lbHapI/mqdefault.jpg)
![Kabolite 336GC Upgrade part 2 [LED Switch and cooling fan]](/img/tr.png)
Thanks for your help. I installed it today and it works perfectly. Greetings Angelo.
Thxxxx soooo much!!! Thxxxx a lotttt for this video!!!!
Wow complimenti..lo vorrei fare anch'io
Hello buddy i love your video But i want ask you i have kapolite wheel loader k966 Can i use like this sound system on it Or what do you recommend Thx 4 teaching us And sharing with us ....Greatings from Canada
U are great!!
What about activating the radio switches in the controller
Mine are inactive
So do you have to turn it on every time it goes off? Does it say on when running the machine?
Ich wollte das genau so machen. Doch der Schalter funktioniert nicht. Es kommt kein Signal an am Empfänger. Muss man da was umbauen?
good sound
How did you get the second and third sounds. I only get the first one?
Where you put that looks like directly where the battery should be sitting or am I wrong?
Power directly from the receiver.
There is no battery in the sound module.
@@tncexcavator2538 I know this. Where you placed the sound module is were the stock 10,000mah 7.4V battery should go right above it. Is there room in there is what I am asking.
@@dennybobsrcconstructionagc2796 I put it over the control valve.
@@tncexcavator2538 I was just wanting to make sure it fits without doing any other major changes. Thanks
hi buddy . nice videos love your work . thay look great . where can i buy one my self . a link or something. thanks
EXCAVATOR :
th.aliexpress.com/item/1005002064530722.html?spm=a2g0o.productlist.0.0.4dcb47047F1dWQ&algo_pvid=8084340e-e696-427e-8cbc-4fb21c1ed160&algo_expid=8084340e-e696-427e-8cbc-4fb21c1ed160-0&btsid=0bb0624516117303196884026e049a&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
SOUND MODULE :
www.aliexpress.com/i/32950858674.html?spm=2114.12057483.0.0.1a3bce30D2OLQ1
Sorry, my Englisch is not so perfect.
Must i have 2 Channels free (9+10) bei FS-i6S? Green one on Channel 10, the black, withe and red one on Channel 9?
I have the Siren Light on Channel 9, the Flash-Light-Change is on Remute-Control at Key-A1.
Go to function 7 (Aux. Channels) and select the switch to match the channel you are plugged into.
The channel that I use with the cable that I plug in
Channel 9 is SWC = Engine sound cable. (black-white-red cable line)
Channel 10 is SWD = car horn cable. (green cable line)
Flashlight : I plugged in the channel named servos on the receiver (But it cannot control It will turn on immediately when the power switch is on)
@@tncexcavator2538 Thank you verry much, when i have a Video, i give you the Link on UA-cam. The maschine is3 days old.
ua-cam.com/video/0qZLE7OME0Y/v-deo.html
What about turning it off I’m not seeing a way of doing that
Adjust the engine sound to idle, after 10 seconds the sound will turn off by itself.
Where did you buy your souns module
www.aliexpress.com/i/32950858674.html?spm=2114.12057483.0.0.1a3bce30D2OLQ1
Thank you. Where did you buy your 336gc and how much
It didn’t work for me it just started the police siren and didn’t stop and is not doing anything when I use the switches
You must also set the switch and subtrim on the remote control.
After installing the sound module
1. Install the sound module
2. Select the switch to match the channel of the sound module on the remote control.
3. Set the subtrim to adjust the engine sound level.
@@tncexcavator2538 set the switch? Where is that on the controller
If not successful
I'll take a video of the remote control settings for you tomorrow.
(My remote control is Chinese, I can't read it. But the function is the same, You can follow my steps.)
@@tncexcavator2538 I got it to start up via the switch but still every time I use the other switch the swd that’s for the horn it just does the police siren
@@tncexcavator2538 I found it out it’s working now
Salve ho fatto tutto come spieghi nel video ma il modulo non funziona,emette solo un suono ripetuto.
Go to function 7 (Aux. Channels) and select the switch to match the channel you are plugged into.
The channel that I use with the cable that I plug in
Channel 5 is SWB = pump cable.
Channel 6 is VRA = left wheel cable.
Channel 7 is VRB = right wheel cable.
Channel 8 is SWA = Lighting Cable.
Channel 9 is SWC = Engine sound cable.
Channel 10 is SWD = car horn cable.
@@tncexcavator2538 devo andare su radiocomando?
Grazie,tutto ok,gentilissimi.
Your voice is so so so soft.. Can't hear anything