Input ko lang, lahat ng mga areas na pwede gumalaw over time idouble weld mo. Like yung bracket, pati sa kabilang side dapat iwelding din. The vibration force with constant use will wear the folds down, kaya mas mabuting magkabila para siguradong matibay at tumagal. Still, you did very well dito.
Ayos boss.....gawa ka rin diy hand tractor, gamit ang transmission ng maliit na sasakyan o gearbox ng motor,,para makatulong ka maliit na magsasaka.....
I didn't received any new notification from your channel neither I received any of your videos in my recommendations for quite a while but I came back to your channel by searching you channel name. Now I pressed that bell. Keep up the good work👍
This is an awesome build. I learned so much that will help me design and build my own plate compactor. I'm going to use a diesel engine and make it bigger than yours to compact our gravel driveway. Thank you for making this video!
Galing idol..isa n nmang makabuluhang project..idol pwede bang mag request n gawa k propane pipe burner pra sa paglechon ng isang buong baboy..paki detalye po paggawa at materials n gagamitin..salamat po idol..godbless you
@@SekAustria salamat pala sa yo idol dahil sa kapanunuod ko sayo nuon pa ay na inspire ako mag youtube. At 1k nako hahaha kahit d ako kasing galing mo. Sana dumami rin. Salamat.
I dont have any training in metal works. Im self taught, diy small home improvement. I would really love to know, can somebody tell me, do we need to buy a shaft for bearing, is it readily available to the specific hole size or do we need to make our own shaft?
For personal use only I hope, I wouldn’t go prepping base for patios and turf with that thing haha Poor compaction, very soft hitting w/ weight added or not
Use the stiff ones. There are three of them. One is longer than the other two. The other two are shorter than the one and are the same as one another. Color is not important but make sure to use structural paint.
inoticed that for some reason when get notified by mail about your uploaded video it shows only title without seeing any picture. that does not happen with all of other channels! do you get that remark from others?
To rotate a 1" shaft, having counter weight of hardly 300-400gms, such a powerful engine is not required. Just a half HP motor would be sufficient. Where's the base frame for the compating plate ? Senseless design..👎
It's great but needs some weight 🤗💕
Input ko lang, lahat ng mga areas na pwede gumalaw over time idouble weld mo. Like yung bracket, pati sa kabilang side dapat iwelding din. The vibration force with constant use will wear the folds down, kaya mas mabuting magkabila para siguradong matibay at tumagal. Still, you did very well dito.
😊😊
ayos yang compactor mo bro ah
at ayos din yung bago mong workshop lupit mo bro
Salamat bro
Супер отлично! Молодец!!! Привет из России.
Вам тоже привет из России. 😀😀😀👍
Ну приваривать пружины это как-то не очень отлично. Даже очень не очень...
@@Альберт_Кронштейн тут согласен,а в остальном супер.
@@Альберт_Кронштейн согласна.
Nice work on a rare tool build. We shared this video on our homemade tools forum this week 😎
Ayos boss.....gawa ka rin diy hand tractor, gamit ang transmission ng maliit na sasakyan o gearbox ng motor,,para makatulong ka maliit na magsasaka.....
Good job nanaman sir idol,aabangan ko yong bmx bike mo with engine driven...
Oo bro thanks
Espectacular proyect my friend!!! Wonderfull tool!!! Best regards from the Argentinian Patagonian !!!!
Chế máy nay quá tuyệt vời luồn🎉🎉🎉
Where is your ballast weight? Like a water tank or lead plates for added weight?
I didn't received any new notification from your channel neither I received any of your videos in my recommendations for quite a while but I came back to your channel by searching you channel name.
Now I pressed that bell.
Keep up the good work👍
Wow great n fr good job Big lk
This is an awesome build. I learned so much that will help me design and build my own plate compactor. I'm going to use a diesel engine and make it bigger than yours to compact our gravel driveway.
Thank you for making this video!
Did u make it?
@@Thermohybrid I'm in the process of building it.
Wow very educational. Idol ano po tawag dun sa rod with bolts on both ends?
Спасибо! Возьму как образец!
Grande, ottimo lavoro come sempre 💯💯👍👍
And this is how harbor freight is able to sell them at $99.99 with a coupon 😂
More like $700
Fantastic fabricating.. Well done.
Quite a useful tool to have. Nice Build.
Like your projects, this one will be very useful for one of my upcoming jobs, but I really wish you would not speed up your videos....
Espetacular muito util parabens e obrigado
Muy bueno felicitaciones👍👍👍👍👍
Nice brother.
good job, I made myself the same tool, it helps a lot. 👍
شكر
good job
! 👍
nice project man
Chou belo projeto parabéns gostei muito 👍👍👍👏👏👏🙏 🙏
Galing idol..isa n nmang makabuluhang project..idol pwede bang mag request n gawa k propane pipe burner pra sa paglechon ng isang buong baboy..paki detalye po paggawa at materials n gagamitin..salamat po idol..godbless you
Can you please make a motorised mountain bike with speed change ? 🤔🙄
I will try bro
@@SekAustria connect the engine to the pedalling and change the gears on the back wheel 😉👍
Hi idol sek. Nice compactor. Wala ka na ba sa house nyo? Mukang iba ang set up ng shop ah. Or inayos nyo lang ang bahay, ligpit kalat. Tnx.
Nakalipat nakami ng bahay at bago na shop maluwang na. 😁
@@SekAustria ay wow congrats idol. Mukang malaki na nga talaga yun shop mo. Mukang my balak ka ng tumanggap ng walk in project. Congrats
@@SekAustria salamat pala sa yo idol dahil sa kapanunuod ko sayo nuon pa ay na inspire ako mag youtube. At 1k nako hahaha kahit d ako kasing galing mo. Sana dumami rin. Salamat.
Ayus yan bro. Kapag bumalik na usual views ko tutulungan kita.
@@SekAustria thank you so much in advance bro. Hahahha ang saya lang..
Sana may ganito para may asphalt roadshindi masyado aesthetic sa tingin ko eh
Ayos! Bagong shop mona bayan? Sana all 🤣
Los resortes de dónde los obtienes?
Excellent
So both of the engine mounting plate linkages got broken on the first use.
Making Mower brush cutter plece
tibe mo talaga abe
Отличная работа. Мастер.
solid build bro...
Salamat bro
Bravissimo 💯👍👏👏👏👏👏👏👏👏
😁
Good joke with the dirty underpants on the table at 12:11 :D
I dont have any training in metal works. Im self taught, diy small home improvement. I would really love to know, can somebody tell me, do we need to buy a shaft for bearing, is it readily available to the specific hole size or do we need to make our own shaft?
Круто получилось, 👍.
great idea. 🤗💕🤗💕🤗💕
Halatang maragul ing panakitan mu keng youtube, oh lupa yang bayu gawa ing bale, bayu yarin ing makina. Good job!
Nice nice!
Good day sir magkano cost nya pag DIY.. except motor..salamat
For personal use only I hope, I wouldn’t go prepping base for patios and turf with that thing haha
Poor compaction, very soft hitting w/ weight added or not
great video bro. why did you one spring and two links in the rear of unit, where in the front you used two springs?
Boss convert ka ng motor to bmx style na bike..
Gagawa takaga ko nyan nagiipon lang pyesa. Abang abang nalang bro
Ayun idol sobrang salamat po.. aabangan ko yan idol!!! Galing mo!🤩🤩🤩🤩
It needs to be a diesel since they have more rotary force therefore creating a higher off set force.
Should be easily swappable when the time comes.
Never weld to springs very dangerous
I welded to a spring and when it broke it almost took my head off
nice video pa!
Mantaaaap creactive 👍👍👍
Nice build but I am genuinely surprised how many videos I see of guys operating machinery in flip flops... and you still have all 10 toes
Hello, you did it a really good job, congrats!! Please can you give me details of the springs that you usted? Thanks a lot.
Use the stiff ones. There are three of them. One is longer than the other two. The other two are shorter than the one and are the same as one another. Color is not important but make sure to use structural paint.
Cool
Keren bos
inoticed that for some reason when get notified by mail about your uploaded video it shows only title without seeing any picture. that does not happen with all of other channels!
do you get that remark from others?
Thanks for informing me, ill try to fix it asap.
qual RPM motor? RPM do eixo excentrico?
Where did you get the springs
Shock absorber
La idea es buena, pero el resultado no tan bueno. Compactar, lo que se dice compactar, no compacta mucho.
1 no.
Saan pong lugar ito at kung open kau ngaun
Price kya hai
Sir, makakabili ng clutch na ginamit mo at ano ang tamang name nyan,
Saan nyo po nabili yung clutch and magkano
Magkano mag pagawa sir wala lang makina?
Muito bom
Top demais 🤝
gawa kayo mini jet engine idol
Boss san k nakabili ng 3/4 go kart clutch??
Lazada bro
Sir mag kano inabot ng gastos mo dito sa diy compactor mo?
how much this machine
.🎉🎉🎉ชอบทุกผลงานและคลิปที่คุณนำเสนอเสมอมา...👍👍👍
Cost
boss taga tarlac ka noh
makananu mu abalu boss?
sasuot mong TSU "jogging pants
lage akong nanonood sa mga video mo boss
Salamat bro 😁😁
ok boss
🙂🙂🙂👏🏼👏🏼👏🏿👏🏿👏🏼
✔
👌
👍👏
👍
To rotate a 1" shaft, having counter weight of hardly 300-400gms, such a powerful engine is not required. Just a half HP motor would be sufficient.
Where's the base frame for the compating plate ?
Senseless design..👎
paps pede b vibrator sa pepe yan? hehehe
it is bullshhit, it will not work
This is exactly how things should NOT be done, a spring should never be welded
Halatang maragul ing panakitan mu keng youtube, oh lupa yang bayu gawa ing bale, bayu yarin ing makina. Good job!