Well it looks like a Merry X-Mass to me Mike! Thoes jugs look great as does the head. So cool to see them all blasted and cleaned up. Happy Holiday to you and Camera Man Mike. Big thumbs up from the big guy.
Right on mike ; my std shovelheads done by Dave . He put em together on his desk in front of me . 22years ago . Well glade he’s still in business . Sounds good . Big boring the twin cam this winter . 95 inch . Had a few great days fer ride . Merry Christmas - ✊✊✊👌👍🏻🙏🏻
Awesome. Dave is one of my favorite people ever. Keep on Keepin' on. Maybe we'll even have Chopperfest next year. Maybe something else at the fairgrounds.
Mike, watching and listening to this vid 2nd time ar0und being the original owner of a 97 evo roadking and I lik it as much as the first day I rode it; I hear evo and mymanttena's go up. so really looking forward to the rest of the before and after. So till the next ,my Best to you and mike for the New Year!
Merry Christmas Mike, and a far happier New Year. Seeing the heads off the Evolution brought back memories. I used to machine the heads for Victory motorcycles. It was a interesting process. Heating the heads up in ovens while immersing the valve guides and seats in liquid nitrogen. Pressing the parts together, letting them cool then doing the final machining. Very tight tolerances. The valve guide bores total tolerance of 0.0003 As always keep the rubber side down.
Thanks, you too! That sounds like a great job. I really liked the Victory. I enjoyed the way they ran and stayed together. I was about to become a Victory Dealer, before the economy went upside down in 2010.
I hauled a Victory that had been in a little tumble. It had a breakage in a very different position than I've seen before. The shift lever had been in an impact and it broke the shifter shaft splined end off, leaving about ½" of shaft exposed. The guy rode it home in 3rd gear and it was in the garage. He had planned to sit on the bike and hold the clutch, but the cool down caused too much drag to just pull the clutch and roll it back. I put a pair of vise grips on the stub and worked the shifter while he rocked the bike. Once we found neutral, it was good to go. I imagine replacement of the shaft is a labor intensive operation.
G'day Mike good to see you again I going to enjoy watching build this engine I find it very interesting, you and yours have a happy Christmas and a safe and prosperous New Year from a fa n down under kind regards John
Well, I appreciate that. I built that engine quite a while back, and it's been great. Now, we're just doing a fresh top end ( High Performance). Happy Holidays to you and yours.
Silent Mike, Hairy Mike, workshop walls & parts of bike, a scene with no cables, just cameras & lights, the sound is by Bluetooth, a Norse king in tights, (& when you can't pull your pants up, they're awfully long knights) so sleep with your head in the bree-eeze, & wear a spare mask on your knees. (Stay safe everyone & have a quiet, comfy Christmas, love from Englandshire : )
Merry Christmas and Happy New Year! I notice that there are 3 'thumb down' in the header line; I just don't get it. How can anyone NOT like this stuff, especially from Mike? ALWAYS good stuff, IMHO.
Thanks Mike, I just sent a price and availability request to Truitt and Osborne for a complete 4-5/8" flywheel assembly. Sadly I can't afford the S&S cycle assembly. They charge an arm and leg for their stuff
Look under our UA-cam Homepage. Click on "Playlists." There is a whole Evo motor series. We'll show these heads when they are done. Then we'll install them.
Mike is a natural in front of a camera
Thank You.
Merry Christmas to you and yours, Mike. Good to see you again.
Thank You. The best to you.
Oh I love evo builds, rebuilt the top end of mine by myself using an old service manual, put 10:1 compression pistons with an ev46 cam
Sounds like fun to me.
Merry Christmas to U2 and a Happy New Year!
Same to you!
Merry Christmas and Happy New year to you guys as well.....thanks for the videos..
👍🎅
Happy holidays!
THANK YOU...for sharing. Mike and Mike a Merry Christmas to both of you and your family and a Happy New Year.
👍🎅
Same to you!
Merry Christmas and happy new year to all. Thanks Mike.
Happy holidays! Thank You.
Merry Christmas Mike and crew!!!!
And back at you.
Merry Christmas Mike, Remember the reason for the season.
Thank You. Merry Christmas.
Merry Christmas Mike and all the best to you and your family! 🇨🇦
Happy holidays!
Merry Christmas! Love my evos' and I love the power you can squeeze out of them.
Yep. You'll like these heads when they come back. Merry Christmas.
Hey brother man Merry Christmas back at ya and to the fellas behind the scenes. Always a good to see the new videos.
Same to you!
Merry Christmas! I have a ‘19 Street Glide, but the more I watch your channel, I want to get an older H-D. I’ve learned much from you, thank you.
Thank You. They are magical. But remember: You can park your old bike right next to your new bike.
Thanks for the season's greetings, and the same to you, and yours's. All the best, cheers. 👍🎄☃
Cheers to you!
Good to have you back brother! Im gonna love to see those heads get worked out! Love the random subscribe sign!
You and me both!
Thanks Mike. Really appreciate you up here in the Wolverine state. Merry Christmas.
Thank You, and, Happy holidays!
Merry Christmas and a Happy New Year. Thanks for the content.
Happy holidays!
Merry Christmas and happy new year's to you and camera man mike
👍🎅
Thank You. And, backatcha.
Always so cool to watch you . Keep safe and take care to you.
Thanks, you too!
Hey Mike, Merry almost Christmas to you. What a surprise to see a new video.
Thank You. I just wanted to show the "before" version of those heads. I thought people would find the changes interesting. Merry Christmas.
Awesome! Will be looking for update. Thanks Mike Y'all have a Merry Christmas ☃️🎄
Thanks! You too!
Merry Christmas Mike! Look forward to future videos
Happy holidays! We'll do them.
Merry Christmas,Mike....looking for I to a great New Year.....with lots of miles......thank you for posting the videos
Thanks, you too!
Merry Christmas mike ..!!!..stay healthy and safe for next year...!!!!:)
You too. All the good stuff to ya.
Well it looks like a Merry X-Mass to me Mike! Thoes jugs look great as does the head. So cool to see them all blasted and cleaned up. Happy Holiday to you and Camera Man Mike. Big thumbs up from the big guy.
Merry Christmas and Happy New Year to you and all of your beautiful girls.
I’ve got a ‘99. I see this exercise in my future. I’m takin’ notes. Thank you.
You won't need notes, just, replay the videos. Thank You.
Merry Christmas and a Happy New Year to you too
Happy holidays!
Wesołych Świąt Bożego Narodzenia i wszystkiego najlepszego w Nowym Roku. Do zobaczenia na drodze
Perfect. Enjoy the Holidays!
Merry Christmas and Happy New Year Mike, greetings from Chile. As usual, thanks for your videos! Cool stuff!
Same to you! Thank You.
Merry Christmas and a Happy New Year Mike .
Same to you!
Right on mike ; my std shovelheads done by Dave . He put em together on his desk in front of me . 22years ago . Well glade he’s still in business . Sounds good . Big boring the twin cam this winter . 95 inch . Had a few great days fer ride . Merry Christmas - ✊✊✊👌👍🏻🙏🏻
Awesome. Dave is one of my favorite people ever. Keep on Keepin' on. Maybe we'll even have Chopperfest next year. Maybe something else at the fairgrounds.
Glad that I got my Mike fix. Keep doing what you do, because you do it well...
Enjoy the Holidays! And, Thank You.
Belated Merry Christmas to you and "thumbs up" camera man Mike. Looking forward to new videos to come from your garage. And Happy New Year to ya!
✌
Happy holidays!
Merry Christmas Mike! This video felt like a personal gift.
Merry Christmas. Glad you liked it.
Merry Christmas Mike, ride safe.
Thanks, you too!
Happy holidays to you as well sir
Happy holidays!
Merry Christmas to you Mike, and all the folks that make this channel great!
Happy holidays!
Mike, wishing you a safe merry Christmas & happy new year
Keep up the good work .
Thanks, you too!
ThanQ, Mike & Mike
Thank You.
Merry Christmas Pacific Mike and crew cheers
Cheers.
Interesting video!
I wish you also all the best for the coming days and a very happy and healthy new year 👍
Cheers from France
Cheers. And, Happy Holidays to you and yours.
Mike, watching and listening to this vid 2nd time ar0und being the original owner of a 97 evo roadking and I lik it as much as the first day I rode it; I hear evo and mymanttena's go up. so really looking forward to the rest of the before and after. So till the next ,my Best to you and mike for the New Year!
Thank you, and the best to you and yours for a Happy New Year.
Merry Christmas to you and Mike the cameraman, and a Happy New Year!
Same to you!
Merry hoho to both Mike's! Do enjoy your vids man!!
Thank You. And Merry Ho Ho too.
Have a wonderful Christmas Mike
You too!
Merry Christmas Mike and Cameraman ... and thanks for sharing this.
Thank you too. Enjoy the Holidays!
Merry Christmas to you and yours!!!
Same to you!
Merry Christmas Mike. May you have a blessed New Year. Thanks for all your interesting videos!
Happy holidays! And, thanks for watching!
Right on brother. Have a good holiday season and stay safe.
Thank You and You too!
Merry Christmas Mike, and a far happier New Year. Seeing the heads off the Evolution brought back memories. I used to machine the heads for Victory motorcycles. It was a interesting process. Heating the heads up in ovens while immersing the valve guides and seats in liquid nitrogen. Pressing the parts together, letting them cool then doing the final machining. Very tight tolerances. The valve guide bores total tolerance of 0.0003 As always keep the rubber side down.
Thanks, you too! That sounds like a great job. I really liked the Victory. I enjoyed the way they ran and stayed together. I was about to become a Victory Dealer, before the economy went upside down in 2010.
I hauled a Victory that had been in a little tumble. It had a breakage in a very different position than I've seen before. The shift lever had been in an impact and it broke the shifter shaft splined end off, leaving about ½" of shaft exposed. The guy rode it home in 3rd gear and it was in the garage. He had planned to sit on the bike and hold the clutch, but the cool down caused too much drag to just pull the clutch and roll it back. I put a pair of vise grips on the stub and worked the shifter while he rocked the bike. Once we found neutral, it was good to go. I imagine replacement of the shaft is a labor intensive operation.
Merry Christmas Mike and Mike
👍🎅
Thank You.
Thanks for all the vids, Merry Christmas and wish You all the Best from Denmark 👍🏻😉😉
Happy holidays! Thanks for watching.
Someone asked me how much more power do I need. My answer? Well, just a little bit more. Another fun video. Merry Christmas to you and yours as well.
Happy holidays! And "More Power" to ya.
Merry Christmas and a Happy New Year to you, Mike !
Same to you!
Merry Christmas Mike! And wishing you a happy new year!! Thanks for sharing!!
Thank You and, Enjoy the Holidays!
Merry Christmas Mike! Hopefully one day I’ll see you out on the road.
You too. We just might.
Merry Christmas Mike you are the Bob Ross of Harleys brother
Thank You. And, Merry Christmas to you.
Merry Christmas my brother, thank u for sharing your world with us, love those Evo's, god bless.
Ride hard ride safe be well
Happy holidays!
Thank You. Mike. I was gettin' withdrawals. MERRY CHRISTMAS!!!
-Joe
Enjoy the Holidays!
Thanks for the update and Merry Christmas to you and camera man Mike
Merry Christmas to you and yours.
Merry Christmas Mike and a Happy New Year !
Love the video content...Thank you for sharing your knowledge ... Keep-em coming....
Happy holidays! And, Thank You.
Happy everyday from West Virginia
I like that! You too!
G'day Mike good to see you again I going to enjoy watching build this engine I find it very interesting, you and yours have a happy Christmas and a safe and prosperous New Year from a fa n down under kind regards John
Well, I appreciate that. I built that engine quite a while back, and it's been great. Now, we're just doing a fresh top end ( High Performance). Happy Holidays to you and yours.
Merry Christmas Mike and "camera-man-Mike"and a Happy New Year! 🇫🇮
Enjoy the Holidays!
Merry Christmas Mike! And a blessed new year!
Same to you!
Merry Christmas Mike for You and Yours family ! Marcin
Enjoy the Holidays! Thank You.
Hello from South Georgia and I wish you all Merry Christmas and happy new year
Happy holidays!
Merry Christmas and a Happy New Year, Mike!
Same to you! Thank You.
Thanks Mike, you do the same.
You are very welcome
merry christmas mike,and a happy healthy prosperous new year....stay safe....all the best.................dougie
Backatcha. Enjoy the Holidays.
well, at least we now know for sure "camera-man-Mike" has a thumb on his left hand! Happy Holidays Mike and Camera-man-Mike!
I'm not sure what to say.
Hey Mike! Merry Christmas to you too!
Thank You.
Hello from Tenn. Merry Christmas to you and yours 🎄
Happy holidays! Thank You.
Happy New Year brother. Look forward to 2021. Much respect from Georgia. GaMike 82fxwg
Happy New Year to you and yours.
Merry Christmas from saskatwan canada looking forward to many more videos
Thank You, and, Enjoy the Holidays!
Merry Christmas and a healthy happy new year
You too.
Merry Christmas Mike and to all at the shop.. 👍
Same to you!
Merry Christmas, Happy New Year. God bless !
Same to you!
Merry Christmas to all
Merry Christmas to you personally for thinking of "all."
Merry Christmas to yall too!! From NW Arkansas. . .
Same to you!
Thank you, Merry Christmas and Safe riding New Year
Same to you!
Merry Christmas Mike!
Happy holidays!
merry christmas mike, keep on thumpen brother...
Thanks, you too!
Merry Christmas Mike and Mr. Cameraman.
Enjoy the Holidays!
Merry Christmas mike really enjoy your videos
Thank You. Enjoy the Holidays!
Oh, and I'd love to hear that Evo motor when it's done!
You probably will.
Merry Christmas to you!
Same to you!
Merry Christmas Mike.
Thank You.
Thank you Mr Mike
Thank You
Silent Mike, Hairy Mike, workshop walls & parts of bike,
a scene with no cables, just cameras & lights,
the sound is by Bluetooth, a Norse king in tights,
(& when you can't pull your pants up, they're awfully long knights)
so sleep with your head in the bree-eeze, & wear a spare mask on your knees.
(Stay safe everyone & have a quiet, comfy Christmas, love from Englandshire : )
Dude! You never dissapoint. Thank You again. I wish you and all of yours a wonderful Holiday Season.
Merry Christmas u guys take care love your videos
Enjoy the Holidays! Thank you.
Thank you
Thank You.
Hello and good morning. Have a Merry Christmas and a Happy New Year 2021 Mike and the Cameraman with the thumb 🎅🎆. Kjell "the swede" 🇸🇪
Thank You and, Enjoy the Holidays!
Merry Christmas from Beaver Valley Ont
Merry Christmas to you!
Merry christmas, Mike!
Enjoy the Holidays!
Happy Christmas guys.
Happy holidays!
Merry Christmas and Happy New Year!
I notice that there are 3 'thumb down' in the header line; I just don't get it. How can anyone NOT like this stuff, especially from Mike?
ALWAYS good stuff, IMHO.
Thank you. You know, you can't please everyone. I'm glad someone enjoys our stuff.
Thanks Mike, I just sent a price and availability request to Truitt and Osborne for a complete 4-5/8" flywheel assembly. Sadly I can't afford the S&S cycle assembly. They charge an arm and leg for their stuff
Don't be sad. You just scored.
@@pacificmike9501 Thanks Mike, never heard of them before and im always open to a better deal!
Love to see more of the evolution engine! I got one to a Fatboy “95 evo
Look under our UA-cam Homepage. Click on "Playlists." There is a whole Evo motor series. We'll show these heads when they are done. Then we'll install them.
Hope you have a Merry Christmas and happy new year!
You too! Enjoy the Holidays!