You're very welcome, I'm happy that my video was helpful! 🍻 If you don't mind taking a second to hit the like and subscribe buttons, I would really appreciate it! 👊🏼🍻
I went with these shocks, different color, for the Wild One. I'll tell you how it goes when they get here. Have a great day Phil. Looking forward to tomorrow
There are a few factors that will determine the stiffness of a shock: The viscosity of the oil, the resistance level of the spring, the volume level of the oil, and how many holes there are in the piston. 👊🏼
One thing that the cheaper shock can’t seem to provide is “shock travel”. The better shocks seem to give close to 30 mm of travel on a 100 mm shock (eye to eye) as where the injoras and others seem to only have between 25-28 mm. Also, I went on eBay and found “soft sets” of springs that will hopefully work well in my 10.2 crawler. It seems for crawlers looking for a softer set these cheaper shocks have much stiffer spring rates. Still waiting for all of my product to come in, we’ll see what kind of Frankenstein mess I come up with😬
Great question. Unfortunately, I can't help, since I installed them on my Tamiya Dark Impact, I have only driven it once and it's been sitting on the shelf since. 🤷♂️
I had these shocks before I had my channel. I recommend using blue thread lock on the lower shock mount. Mine came unthreaded and I lost my spring and center spacer cause I didn’t catch it quickly on the trails. Great video 👍
Hello Fellow friend....just a question...do you have any experience with the rc4wd mudslinger tires? Just curious on the direction of application....ive heard and seen different opinions....just thought id ask of your expertise....thanks in advance if ya do its greatly appreciated.....Id hate to mount them then find out they are backwards😂😂✌
@@mandodebbiechavarria6201 hey brah, my wife runs those rides on her CC01 and LOVES them!!! Can't say much about direction, they do seem to angle forward like a chevron would and that's how we mounted them. Hope that helps! 🤙
Hi. I found the injura shocks a bit gritty, the ones you have on your Pumpkin. I ended up removing them and went with Fastrax on my LB and they seem much better and a larger bore.
Is that right?!?! That's funny, because I find the orange Injoras I have on my MP to be the smoothest of the bunch! Must have some interesting QC going on over there at the Injora factory. Lol! 🤙 Thanks for watching, pal!
@@poorboysrc To be fair to them, I contacted them and they replaced one shock which must not have been machined properly as the piston would not move freely. Was great customer service.
Hey! Something very strange happened to me with the traxxas jato shocks. I opened it up, took out the oil, washed it with soapy water and cleaned the interior. I dried it, then I put a new oil. I did it with all four shocks. 1 week later, only one of the piston started to stick inside the cup, the others are perfect. To this day I still don't understand how this happened or why. Would you have an explanation?
Hey pal, thanks for the comment. Can you give some more context to your question? This is a bit of an older video of mine and I don't recall everything discussed. 🍻
@@poorboysrc I was saying that I always thought that the shock should be full to the top when your done. But then I realized you have to have space for the rod to displace the oil. So a little air space would allow this. I remember back in the day the shocks I always had, had a bladder that took care of the “air space.”
@@harleyguy932 ah I hear ya! Yeah these shocks, if there's no room at the top, when the shock compresses, they'll kind of "bind" a little, I'm not sure exactly how to explain it, but definitely leave a little room at the top for the air and oil to move around and you're gold! 👊
@@poorboysrc yea we got some cheapie s off of eBay. They seem built well all aluminum but have a tiny inner diameter, so my thinking is less volume, maybe heavier oil?
@@poorboysrc ok, I managed to find a set, option No1 shocks or rcaidong , I don't know the quality of them but I'll give them a shot ,unless you can recommend something else, as I bought accidentally 1/10 Traxxas shocks look sick but they're huge won't fit .
@@LassoKid7777 Option #1 makes good stuff. I've had a lot of their products on the channel and I've been really happy with them. I bet they'll be good quality.
Try taking them apart and inspect the rubber o-rings. A leaking shock is usually either a damaged o-ring or possibly the piston got damaged resulting in the o-ring getting cut. 👊
@@poorboysrc thx for the tip! I was just about to order some but there is so many choice, 20 wt ,45 wt, I only got some scx24 , no 1/10 scale, wich one is the best? The less thick one ? Thank you!
@@maximizeism always happy to help, but I have no experience with the 24 scale world. I would think since it's so light, a lighter oil would be a good starting point. But that's really a guess. Try and start at 20wt and you can always get thicker from there. 👊
Hey John thanks for the sub!!! I'd say these are plenty soft for a crawler. Not the smoothest shock I've bought, I don't think I'd use them in a crawler because they're a little sticky. The orange Injoras, however, I'd drop on a crawler for sure! If you haven't seen my review on those be sure to scope it out! 🤙
these shocks are not good, like when you screwed the top cap on the rubber o-ring got caught on outside of body, they just dont work any better than cheap stock shocks
"I'm not a pro pro RC racer"
*Insane collection of RCs behind him*
Love your content!
Still not a pro RC racer. Still working on that collection. 😅👊🏼🍻
THANK YOU!!!!
That is the best video I’ve seen showing adding oil, how much and why not to OVER fill!!!
Much appreciated!
You're very welcome, I'm happy that my video was helpful! 🍻
If you don't mind taking a second to hit the like and subscribe buttons, I would really appreciate it! 👊🏼🍻
May the Excellence be with you.
Haha, and also with you. 😆
I went with these shocks, different color, for the Wild One. I'll tell you how it goes when they get here. Have a great day Phil. Looking forward to tomorrow
Oooh, those will look awesome on the Wild One! Hope they work out for ya, Simon! 🤙
Hi. A question, so the hardness of the shock absorbers depends on how much oil is inside and not on the viscosity of the oil?
There are a few factors that will determine the stiffness of a shock: The viscosity of the oil, the resistance level of the spring, the volume level of the oil, and how many holes there are in the piston. 👊🏼
Nice, I did the exact same thing to the same shocks, only thing I did different was adding a droop spring under the piston inside the shock.
That's a cool idea! Thanks for sharing! 🤙
@@poorboysrc Pen Spring mod! Helps for crawling so the shocks dont unload as fast.
@@shredcraftrc that's a cool idea, I've never heard of it. I might try it on my TRX4.
@@poorboysrc I recommend it! Really stabilizes it, love it on my TRX4
@@shredcraftrc thanks pal I think I'll give it a whirl! It's getting to crawling season out here so I'm stoked to try out a new setup! 👊
One thing that the cheaper shock can’t seem to provide is “shock travel”. The better shocks seem to give close to 30 mm of travel on a 100 mm shock (eye to eye) as where the injoras and others seem to only have between 25-28 mm. Also, I went on eBay and found “soft sets” of springs that will hopefully work well in my 10.2 crawler. It seems for crawlers looking for a softer set these cheaper shocks have much stiffer spring rates. Still waiting for all of my product to come in, we’ll see what kind of Frankenstein mess I come up with😬
Try taking a bit of oil out of the shocks to allow for the piston to move all the way up and down. I had to do that on mine, it helped a lot! 👊
Did these shocks leak over time I just bought the 120mm set for my dads Hpi crawler king that original shocks are 77mm/117mm compressed and extended
Great question. Unfortunately, I can't help, since I installed them on my Tamiya Dark Impact, I have only driven it once and it's been sitting on the shelf since. 🤷♂️
I had these shocks before I had my channel. I recommend using blue thread lock on the lower shock mount. Mine came unthreaded and I lost my spring and center spacer cause I didn’t catch it quickly on the trails. Great video 👍
Great tip Jesse, losing that center spacer would be a bummer! 👊
Are these shocks any good on a buggy or truggy 1/10 or are they just for crawlers??
Good review, your videos are helpful for us who are on a tight budget. Keep them coming 👍
Great to hear! Thanks for the feedback! 🤙
Just want to say thanks for listening to your viewers...on the video request...gonna give the shock filling a go.....keep up the great vids...👍✌
You're welcome Mando. Thanks for watching and providing feedback and ideas for the channel. 👊
Hello Fellow friend....just a question...do you have any experience with the rc4wd mudslinger tires? Just curious on the direction of application....ive heard and seen different opinions....just thought id ask of your expertise....thanks in advance if ya do its greatly appreciated.....Id hate to mount them then find out they are backwards😂😂✌
@@mandodebbiechavarria6201 hey brah, my wife runs those rides on her CC01 and LOVES them!!!
Can't say much about direction, they do seem to angle forward like a chevron would and that's how we mounted them. Hope that helps! 🤙
Yes sir thank you.....thats what im going with....and yea im gonna mount them on my wifes redcat gen8....thanks for reassuring me...👍👍✌
Hi. I found the injura shocks a bit gritty, the ones you have on your Pumpkin. I ended up removing them and went with Fastrax on my LB and they seem much better and a larger bore.
Is that right?!?! That's funny, because I find the orange Injoras I have on my MP to be the smoothest of the bunch! Must have some interesting QC going on over there at the Injora factory. Lol! 🤙
Thanks for watching, pal!
@@poorboysrc To be fair to them, I contacted them and they replaced one shock which must not have been machined properly as the piston would not move freely. Was great customer service.
@@DustyFingersRC good to hear! Customer support is important these days!
You sealed the sub with the Bill and Ted's line!
EXCELLENT! 🎸
Hey! Something very strange happened to me with the traxxas jato shocks. I opened it up, took out the oil, washed it with soapy water and cleaned the interior. I dried it, then I put a new oil. I did it with all four shocks. 1 week later, only one of the piston started to stick inside the cup, the others are perfect. To this day I still don't understand how this happened or why. Would you have an explanation?
That's bizarre, never heard of that happening before, sorry pal. 👊
I always though that the shock should be full and it’s the holes in the piston that allow it to travel through the oil?
Hey pal, thanks for the comment. Can you give some more context to your question? This is a bit of an older video of mine and I don't recall everything discussed. 🍻
@@poorboysrc I was saying that I always thought that the shock should be full to the top when your done. But then I realized you have to have space for the rod to displace the oil. So a little air space would allow this. I remember back in the day the shocks I always had, had a bladder that took care of the “air space.”
@@harleyguy932 ah I hear ya! Yeah these shocks, if there's no room at the top, when the shock compresses, they'll kind of "bind" a little, I'm not sure exactly how to explain it, but definitely leave a little room at the top for the air and oil to move around and you're gold! 👊
@@poorboysrc yea we got some cheapie s off of eBay. They seem built well all aluminum but have a tiny inner diameter, so my thinking is less volume, maybe heavier oil?
@@harleyguy932 all depends on the weight. Take it for a spin and when there's too much rebound, thicken up that oil.
I'm having a hard time finding aftermarket shocks for my DT03T seen these but don't know if they're compatible
My long term review on these shocks isn't the best. I'd suggest getting a better set. These wore out fast.
@@poorboysrc ok, I managed to find a set, option No1 shocks or rcaidong , I don't know the quality of them but I'll give them a shot ,unless you can recommend something else, as I bought accidentally 1/10 Traxxas shocks look sick but they're huge won't fit .
@@LassoKid7777 Option #1 makes good stuff. I've had a lot of their products on the channel and I've been really happy with them. I bet they'll be good quality.
@@poorboysrc excellent
I had this shock...but mine seem to be leaking on the bottom shock...help needed...
Try taking them apart and inspect the rubber o-rings. A leaking shock is usually either a damaged o-ring or possibly the piston got damaged resulting in the o-ring getting cut. 👊
What weight oil ? I used 30 weight and they bounced back like they had no oil
I'm using Tamiys yellow (soft) oil, which I believe is about 30wt. They're still a little bouncy, just like yours.
What’s a good oil weight for crawler?
Depends on a few variables, truck weight etc... I'd say start with 35wt and tune from there.
What's the diameter of the shock? including the springs
15mm 👊
what is the difference between a dual spring and a single spring?
The dual springs have different resistance rates where a single spring only offers one resistance rate. 👊
@@poorboysrc thanks!!
Awesome videos! One word of help...
Ano dize, not ando nize👍 Rock on my man!
Hahaha I know, I know! I catch myself screwing it up often but just couldn't edit them all out! Lol!🤣
I did get some scx24 injora adjustable oil shock, and I was wondering wich oil to put in, i am not a fan of oil either but i wanna try 😅
I usually start at 35wt and dial up or down my thickness from there. Have fun bro! 🍻
@@poorboysrc thx for the tip! I was just about to order some but there is so many choice, 20 wt ,45 wt, I only got some scx24 , no 1/10 scale, wich one is the best? The less thick one ? Thank you!
@@maximizeism always happy to help, but I have no experience with the 24 scale world. I would think since it's so light, a lighter oil would be a good starting point. But that's really a guess. Try and start at 20wt and you can always get thicker from there. 👊
@@poorboysrc this is exactly what I was about to order , thank you sir!
@@maximizeism any time, amigo! 🤙
Great work keep it up👍
Thanks Maxee!
W man bro i am getting new springs soon
Hope they work out well for ya! 👊
Great vid bud I got some of them of Amazon bud
Thanks pal, hope they work well for ya! 🤙
Thank you sir
NICE. ARE THEY SOFT ENOUGH FOR CRAWLERS?? OH AND. *** NEW SUBSCRIBER!!!!!! ***. 😀🤙🤙🤙🤙🤙🤙
Hey John thanks for the sub!!! I'd say these are plenty soft for a crawler. Not the smoothest shock I've bought, I don't think I'd use them in a crawler because they're a little sticky. The orange Injoras, however, I'd drop on a crawler for sure! If you haven't seen my review on those be sure to scope it out! 🤙
these shocks are not good, like when you screwed the top cap on the rubber o-ring got caught on outside of body, they just dont work any better than cheap stock shocks
They're cheap, they work ok, not the smoothest but luckily, no oil leaks yet.