Great video man ! I have me ktm exc 450 2017 now for 2 days and did't come with the tc/map switch option. Will it work for my exc 450 as wel and plug in that cable is all you need to do ?? Thanks
Hi guys, question: I've just fitted a map switch (as per your setup) but have found that the kill switch is now touching the clutch reservoir. Do you have it completely away from the reservoir towards the centre of the bars?
So for US version, how to install? ( indeed..the Red PLUG is not on my 2017 500 usa model). I'd like to try this but wondering if lost cause for US models.
does anyone know how to wiring in the dongle into the wiring harness on a Husqvarna 2018 FE450 didn't have the orange plug that accepts the map switch. can't seem to find much about it. but get this switch working. appreciate the help if anyone can point me right. thanks
Yes, this switch will fit your 2017 KTM 350 EXC-F. It gives you two options; the standard map (map 1) and a secondary map that has greater throttle response (map 2). Plus the addition of two kinds of traction control, that is also switchable on and off.
Can you remove this switch without get any error codes? I only use map 1 and don't use the TC. Thinking about removing it to clean up the handlebar setup...
The US 450/500 EXCs have plastic plugs in the ECU pin positions 28 & 32 where the pigtail that ends in the red plug by the headlight is installed on all models except the US ones. You can wire your own pigtail up and then plug the map switch into this home made wiring "sub-harness". However, without a change in the stock US map the switch will not be recognized by the ECU and will not function. You need to either have the Euro off-road map installed (now no longer possible via US dealers) or purchase the Vortex ECU which reportedly will recognize the map switch.
I don't understand how that switch works. I still understand map 1 and 2, this would go through the ecu but I don't understand the tc (traction control) there are no sensors around the rear wheel that can register anything, how can the tc work then?
Changes some settings in you ECU for timing and spark for different power settings, there should a mild, mid and wild if three options, or a mild and wild or trail/race mode.
@@elaponte order a wiring harness from europe, and traction control bar switch, then have your ecu unlocked and traction control is already loaded into your ecu and your good to go. Challenge getting a dealer to unlock the ecu:
not for US bikes...they have a different harness except for similar US husky types...they have the plugs you need the euro map for the switch to work which we dont in the US when bike is new
so for US version, how to install ( indeed..the Red PLUG is not on my 2017 500 usa model, i looked). I'd like to try this but wondering if lost cause for US models.
@@moderatelyokrider I have the 2020 350 EXC-F US version also. The red plug IS behind the headlight mask. It has a removable black cover on it. I'm still trying to figure out if the switch will actually work on the US version. I'm hoping that if it has the plug for the switch it will work.
tengo un ktm 450 exc-f six days us y no trae map switch, compre la pieza oem para instalar pero no consigo encontrar el cable rojo para conectarla en la moto
I had my dealer install the European Map onto my ECU and only the dealer can do this, the switch alone will NOT do ANYTHING for your bike and you will not know the difference.
Does this fit 2018 ktm 250 excf
Great video man ! I have me ktm exc 450 2017 now for 2 days and did't come with the tc/map switch option.
Will it work for my exc 450 as wel and plug in that cable is all you need to do ?? Thanks
Through this is it possible to put a exc 300 2018 tpi version down to roughly 15 hp with the click of a button, after tuning these modes?
Hi guys, question: I've just fitted a map switch (as per your setup) but have found that the kill switch is now touching the clutch reservoir. Do you have it completely away from the reservoir towards the centre of the bars?
So for US version, how to install? ( indeed..the Red PLUG is not on my 2017 500 usa model). I'd like to try this but wondering if lost cause for US models.
hello, i just bought a 250 exc-f 2016, can i install the map selector in tha same way? thanks
What about the 2018 500exc I dont have that connector is it a non USA feature
Will this fit a 2016 Ktm 250 xc-f? I’m very interested. That’s for vid.
Hi, i can't start my bike when map is unplugged for soft performance. I have ktm 250 sx 2016. Can you give me an advice what to check. Thanks
Can u tell me what wiring harness I need to put front and rear light on my ktm sxf kick start
Can i put map switcher on sxf250 2011?
does anyone know how to wiring in the dongle into the wiring harness on a Husqvarna 2018 FE450 didn't have the orange plug that accepts the map switch. can't seem to find much about it. but get this switch working. appreciate the help if anyone can point me right. thanks
Just got a 350sxf brand new with this feature and mine does not light up? Anyone have any clues as to why?
Would this be the same as a FC 250?
What is the target for 350 exc f 2016?
I have a 2017 KTM 350 exc, will this map switch work for Me? Will it change my bike performance significantly?
Yes, this switch will fit your 2017 KTM 350 EXC-F. It gives you two options; the standard map (map 1) and a secondary map that has greater throttle response (map 2). Plus the addition of two kinds of traction control, that is also switchable on and off.
I have a ktm 250 sxf factory usa 2016, this map switch work on my bike? I have already bought the piece. I want to do an experiment
Mauro Liotta Hi I am also looking for this info. Did you find a solution ? Thx
so?;)
Hi!!! For EXC-F 350 2023
WORK???
Can you remove this switch without get any error codes? I only use map 1 and don't use the TC. Thinking about removing it to clean up the handlebar setup...
I have a ktm 450 exc-f six days us and not bring map switch, buy part oem to install but I cannot find the Red wire for the connection on the bike
The US 450/500 EXCs have plastic plugs in the ECU pin positions 28 & 32 where the pigtail that ends in the red plug by the headlight is installed on all models except the US ones. You can wire your own pigtail up and then plug the map switch into this home made wiring "sub-harness". However, without a change in the stock US map the switch will not be recognized by the ECU and will not function. You need to either have the Euro off-road map installed (now no longer possible via US dealers) or purchase the Vortex ECU which reportedly will recognize the map switch.
I don't understand how that switch works. I still understand map 1 and 2, this would go through the ecu but I don't understand the tc (traction control) there are no sensors around the rear wheel that can register anything, how can the tc work then?
Can somebody please tell me what a map switch dose? I have a TM 250 2 stroke and I have a map switch and I have no idea what it dose
Changes some settings in you ECU for timing and spark for different power settings, there should a mild, mid and wild if three options, or a mild and wild or trail/race mode.
Anyone in the commets that knows if this would work on Husky FC350 2016 eu model??
I do't see the red plug behind my front plate. Could it be under the tank? I have the same bike.
Is yours the US version...if so, yea we dont have that plug...now to find a solution :)
@@elaponte order a wiring harness from europe, and traction control bar switch, then have your ecu unlocked and traction control is already loaded into your ecu and your good to go. Challenge getting a dealer to unlock the ecu:
not for US bikes...they have a different harness except for similar US husky types...they have the plugs
you need the euro map for the switch to work which we dont in the US when bike is new
so for US version, how to install ( indeed..the Red PLUG is not on my 2017 500 usa model, i looked). I'd like to try this but wondering if lost cause for US models.
Hi guys, will thus fit a 2020 350 excf, Australian spec?👍
Does this work on a ktm exc350f 2014?
Nop
Same install for 2020 350 excf?
Davo Heno I have the same bike, USA version. I’m not seeing the red plug under the headlight mask.
@@moderatelyokrider I have the 2020 350 EXC-F US version also. The red plug IS behind the headlight mask. It has a removable black cover on it. I'm still trying to figure out if the switch will actually work on the US version. I'm hoping that if it has the plug for the switch it will work.
tengo un ktm 450 exc-f six days us y no trae map switch, compre la pieza oem para instalar pero no consigo encontrar el cable rojo para conectarla en la moto
I had my dealer install the European Map onto my ECU and only the dealer can do this, the switch alone will NOT do ANYTHING for your bike and you will not know the difference.