💥Audi A3 All keys lost Micronas Clusters using part Autel im508, part MDP💣 ABRITES via obd failed👈

#how #diy #money
Autel IM508 buy it from here:
amzn.to/3ZJXpwY
This video is for informational purposes only! We do not assume any responsibility for material damage or damage to personal property as a result of the information contained in this clip. Use this information at your own risk. More VIDEO TUTORIALS
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY

[@user-gw1mm5wm3e]

Excellent!

[@yarbjamel6132]

Great 👍 work

[@angkeyobd4395]

not in mode wizard , avdi , standard , akl , online work perfect can uds , micronas till 2014 no miss never ever 😁😁😁

[@arielluna8236]

Que programador es el q usaste ?

[@awariaklucza8009]

used zed full via obd working 100% :) :) :)

[@acquiescetcb]

Was this definitely a micronas dash? You are lucky then, I cant even get zed full to do these as a spare when i have a working key 🤔

[@gyorgylesko3318]

Hi Sebastian. Could you recommend an alternative device what can read pin and full CS from this cluster? Or better to buy this XEP100 PROG? thank you

[@sebastianthelocksmithandre1600]

Abrites does a very good job and not that expensive either

[@gyorgylesko3318]

Thank you!

[@soldiers-nf2ps]

I recently bought full Merc and bmw avdi worst purchase ever

[@motosystemltd]

Overpriced, fried of mine got one never ever paid back.. I using uhds smok and happy so far, quoter of Arbite prices and still works after subscriptions gone.. Just no updates

[@motosystemltd]

Nice:) Autel didn't get Cs form anything? , often won't in pre decade vags.... occasionally I have issue with Vag manual remote programming, m608 show is detected and completed but not working😳 after remove from ign.. .. , its not should work straight after key learning ? Didn't see if transponder integrated with remote board.. In some much olders vag doing touregs etc etc. Thanks! :) Still better than flapping the doors and key swinging 🤣

[@786hunzavalley]

Hi. Nice video.
I need help. I was trying to add spare key to audi a1 (keyless model), done on many times on golf etc with key in ignition.
This Audi a1 doesn’t have ignition key hole (keyless), I used Autel im508 with xp400 to programs spare key via expert mode. It went through successfully, but when I tested, it didn’t work.
Then I tried all key lost mode, to reprogram both keys to car. It asked me to switch ignition off & on again.
When I switched off , then it doesn’t back on again. Says key not present
How to resolve this problem. I have all the adapters of im508 & xp400. But never used them before. I can connect the adapter to xp400 and eeprom chip , but it asks for further details of chip manufacture, type etc. I don’t know those as well. How to rewrite key if I take data from eeprom chip
Thanks.,

[@sebastianthelocksmithandre1600]

I'm not sure what is going on in there. Sorry.

[@786hunzavalley]

@@sebastianthelocksmithandre1600 thanks for your reply. I just wanted to know for keyless Audi A1?(advanced key), if original key transponder doesn’t work for some reason or car doesn’t recognise original key transponder , then is there any way to switch on ignition?
On the other hand, ignition which can be turn on & off with key blade… even the car doesn’t recognise key transponder, ignition can be switched on with original blade, car doesn’t start but atleast it can be switch on and key can be reprogrammed via diagnostic tool.

[@mohammedilyas3938]

I had same one 2007 i got cs and pin code from autel itself but it wouldnt learn in? Is that because the cs code was 00 at the end? I tried getting the 7th byte too but still said 00 so wouldnt learn in

[@cerrajeriareyes2088]

hola Sebastián necesito ayuda .para este audi ..no tengo esa maquina con que lees la eprom ..con cula ña puedo acer

[@sebastianthelocksmithandre1600]

Can you try in English? If not I will try to translate sorry

[@manindersingh3874]

hi I see all your videos are really helpful ... same car I had today I did all the try to read the cs and pin code no luck. is there any other option to read them i have vdo micronas

[@sebastianthelocksmithandre1600]

Thank you for your interest, if you can't get it the way I did it, then you have to unsolder the eeprom

[@Autotechkeysltd]

Hi is this tool any good I’ve heard mixed reviews?

[@tamirk5099]

Year?

[@sebastianthelocksmithandre1600]

2009

[@BajaKeys]

Hi Sebastian, whats the name of the reader you used to get the pin cs, where did you buy it? thanks in advance

[@bahramismailov7425]

@@BajaKeys MRPPad XEP100Prog