👋 Hey, thanks for the suggestion👍. It would depend on the amount of usage the trimmer delivers and for how long. This would determine when the blade should be replaced because '6 months' is an arbitrary number. Now, if the user trims/shaves facial hair once a week or 52x a year, why would one replace the blade🤔 every 6 months? Please explain your reasoning for 6 month replacement?
Ive had my gold fx trimmers for 3 years and havent changed blade yet. Im booked solid 5 days a week so theyve seen a ton of volume they still crunch like 1st day i got em and i know exactly how they feel when i use them i wont change blades untill they start snagging. You change blades when you feel they need it
Each one teach one👍. UA-cam is a wealth of knowledge and has got me out of predicaments time after time💪 Thanks. Which Babyliss trimmer did that video help you to fix??
I had to put the long screws in first to line up then I had to hold it down tightly to to keep the spring from popping up, very frustrating, but it helped to put it together easier.
If u look in side the gapping tool it has a piece of plastic that holds the tool in place. It is one one side only so the side without the piece gets pushed out more .
@@islord999 the zero gap tool has an area for the Allen screw driver to pop into. In mine, I had to pull it out of the zero gap tool when I got it out of the box. Can be helpful for keeping stuff together and not getting lost in the drawer.
Im not lyin when i say, when i hooked the gold part up to the front of the lil springs, it took me over 3 hrs to screw it in bro🤦🏾♂️damn neck was killin me cause i was lookin down for that long man
Ok I think there are some lo pros out there with the cam backwards. Took one apart from stock. Fliped the cam over and boom that mid dot on it facing bottom works way better.
Just the video I needed, i got the silver fx and they started making loud noises like rattling. I took apart the blade and was having trouble with the spring part when putting back together. Going to try this again!
Thank you so much. Wondeful video. Unfortunately, I dropped my machine a few months back. I can't seem to figure out why it's not cutting any longer. I can't seem to get it to cut. There is practically no signs that it was dropped or of any damage. It's expensive and I don't know if I should replace the blade if I just don't know if this is actually where the issue lies. Thank you in advance for an excellent video and for any additional help!
Thank u so much for this video!!!!! Iv been at it since like 12pm trying to put mine back together! I feel like I was being trolled while watching other ppls videos on how to fix them!!!!
🤔hmm, I've never had to search for the Fx Trimmer zero gap tool before, so, I can't even tell you. But there's good news 😁 and that is if you can get yourself a 1.5mm or maybe a 2mm Allen key you can zero gap using that alone.👍👍 Let me know if you can get your hands onto those 2 Allen keys, ok?! Good Luck bro 💪 🙏 👍
I bought mine off Amazon and it didn't come with the yellow screwdriver but it's perfectly Zero gapped. Idk if that's an Amazon thing or they just figured everyone was ganna do it anyway.
Hi, I’ve been having extreme trouble with getting this blade to screw In because of the reaction of the spring, I’m unable to get the screw to screw into the still blade. Please help if possible.
Hey so I just got my trimmer and the black blade or still blade idk how else to call it, it shifts like it doesn’t stay in the middle (well aligned) I believe that’s what you were trying to fix too right? Any ideas why or how to fix? Any help anybody will be appreciated. TIA!
With all 3 parts in place, try inserting the long screws thru the blade and into the spring retainer first. This will stop the assembly from sliding out of place. You'll only have to focus on the the screw. Good luck!
Try looking at the zero gap tool. It’s the handle. I just ordered some babyliss trimmers and was looking for the screw driver. On mines the screw driver is black and not yellow.
To zero gap it you don't have to take it completely apart. All you need to do is take it off the head, and then slightly take off the screws if you're not using lock tite and put back on.
Great content you got my like! I like your idea of loctite and using a magnifying glass. Something so simple yet so helpful and practical. I’m heading to harbor freight ASAP today! Lol. Thanks again.
Try adjusting it to the point a little before it zero gaps it bites the skin when the bottom blade is sticking farther then the upper blade and try not adding too much oil this may be the reason its moving up and biting the skin maybe?
Good day, you should provide and breakdown in the caption of the tools you used and how to get them, I'm from the Caribbean and I got hell to figure out what loctite is... Question though, what's the situation if you've got to remove them?
How did I miss that opportunity to link loctite in the description 🤦🏾♂️ I will definitely add a link to the product now. Situation: Cutting blade sliding OUT OF ALIGNMENT due to oil, heat and vibration.
Yea, I wouldn't use loctite on that, he may not get it back off when needed. They do make different strengths, if u try it use the weakest kind of loctite, they have different strengths, coded with different colors.
Hi and thanks for a great video 👍🏻 Just a quick question is this trimmer worth the price or would you recommend something else? Just need it to cut my always short hair real short and trim edges of me beard..
It's fire bro, I use it to line up my beard and it looks like I got it done professionally. Definitely worth it over going to the barber every couple weeks.
Try looking at the zero gap tool. It’s the handle. I just ordered some babyliss trimmers and was looking for the screw driver. On mines the screw driver is black and not yellow.
You asked the question and the 1st thing that entered my mind was PRICE! The Wahl Detailers is a hard tool to beat, but DO NOT DROP THEM! They are fragile.
delace1111 yea bro I ended up gettin the babyliss pro FXs. I actually got them brand new for free cause amazon delivered late but i thought they lost the package so I had contacted them
Hmm, your trimmers were running mint. You happened to dropped them. Since then you have changed the blade and now the new blades are pulling hair. 🤔 How many hours are on the new blades?
@@DelaceLeCoiffeur zero , its more so catching the skin they are aligner and not crooked but for some reason they catch skin its ok when i try it on arm hair its a chameleon fx trimmer but with the gold blade since Babyliss doesn’t support anything in Bulgaria you cant buy the chameleon blade
Can u help me. I have problem a Screw on the left side that allows to zerogap machine so har d I couldn’t twist ii tried so hard and now crewdriver just run throught because hole on the crew became bigger and i cant do anything
I need some advice. I dropped my baby bliss and it’s making a loud noise & cuts on one side only. How do it deal with that? Should I buy a new blade or adjust the one of I have cause I don’t see any cracks in the blade
You probably have to tighten the screws. it sucks you dropped them but I went through the same thing lol. I took mine apart & seen no problem but noticed the screw was slightly loosened so I took time to tighten every screw near the blade. If that doesn’t work then idk what’s wrong lol good luck!
i got a new gold fx trimmer with the stock gold fx707z blade, it looked to already be zerogapped from factory, i noticed when i use it on really small neck hairs, it seeems to kinda grab/pull, but only when the hair is super tiny, kinda like when its trimmed the day before and just grows a tiny bit. it seems to cut other hairs fine. is this normal? i assume when the hair is super small its kinda coarse, which is why this blade cant cut it properly hence the grabbing/pulling? unless im mistaken. thx
Hey mang, I wouldn't give up on those fxs' just yet. If you say they're new, give the blades some time to break-in and settle. They should get better with every cut. Last thing, I did find that they grabbed vellus hair, so I use my slimlines in those cases. Good luck 👍
@@DelaceLeCoiffeur ty so much dw i love em im keeping, also is the blade supposed to be warm after 5 mins of usage? or does that just mean they need oil
The Allen screw on the right side of mine seems like it’s stripped or something. I can’t seem to get it loose using the provided Allen key sent from babyliss 😫
Mine was stripped to so i put a drop of super glue in the screw and put the lil screw driver that comes wit it in the screw wit the super glue still wet . I held the screw driver for a lil let it dry a bit then once fully dry i was able to turn the screw it worked good
Yeah, but the only major problem is, its not that easy. When you got to tight the screws, the moving blade never stays where you put it. It ALWAYS moves when you tighten it down. Im a barber or 36 years. Ive never been able to set liners in one go. It takes days of trial an error with clients and my own skin. Either one side is to sharp or not. The best way is to have the moving blade slightly above the comb blade and youll have to use your trimmers as a bald out blade for abfrw weeks untli the hair sands down the moving blade over a period of time they'll be perfect. Always have extra trimmers for the time being but this has always been the best way for me. Thats with any and every trimmer. Hair does sand down blades. Trust me.
Your supposed to change your balde every 6 months
👋 Hey, thanks for the suggestion👍. It would depend on the amount of usage the trimmer delivers and for how long. This would determine when the blade should be replaced because '6 months' is an arbitrary number.
Now, if the user trims/shaves facial hair once a week or 52x a year, why would one replace the blade🤔 every 6 months?
Please explain your reasoning for 6 month replacement?
,,,😘😘😘😘😘😘🤩
Ive had my gold fx trimmers for 3 years and havent changed blade yet. Im booked solid 5 days a week so theyve seen a ton of volume they still crunch like 1st day i got em and i know exactly how they feel when i use them i wont change blades untill they start snagging. You change blades when you feel they need it
@@DelaceLeCoiffeur sonned him with class, and of course he never had a rebuttal
And why u must ?
3 years later ur still saving lives thanks man
Each one teach one👍. UA-cam is a wealth of knowledge and has got me out of predicaments time after time💪
Thanks. Which Babyliss trimmer did that video help you to fix??
Broke my clippers thank you
💀
😂😂😂
no fr
😂😂😂😂
😂😂😂
Only video to show how to put that spring back in the right way💯💯💯✅👍🏽🙏
Thanks MARCUS 👍 We always find the solutions to our problems! #ProblemSolvers
I’ve tried so many times 🤣🤣😂😂
For fuckin real 😂
Always show respect to the dedicated hair care professionals that put sanitizing ahead of profits #Salute
Bet 💯 it’s a shame that a lot of these folks out here don’t sanitize properly …I’ve walked out out of shops just bc of that
🚪 🏃🏼♂️ 💈 🧼 🧽
Thank you very much brother, you saved me from having to buy a new blade for some nonsense, thank you very much seriously ❤❤
you the only 1 that had a video that actually made sense good job
dude u saved me from a nervous breakdown thanks for your tutorials. liked and subscribed.
Thanks yungen!
@@DelaceLeCoiffeur yes sir
I had to put the long screws in first to line up then I had to hold it down tightly to to keep the spring from popping up, very frustrating, but it helped to put it together easier.
If u look in side the gapping tool it has a piece of plastic that holds the tool in place. It is one one side only so the side without the piece gets pushed out more .
What do you mean my man. Explain this please
@@islord999 the zero gap tool has an area for the Allen screw driver to pop into. In mine, I had to pull it out of the zero gap tool when I got it out of the box. Can be helpful for keeping stuff together and not getting lost in the drawer.
Thanks for going pretty in depth with it. helped me fix the blade not cutting right. I have them hitting right again.
Glad it helped bro.
Im not lyin when i say, when i hooked the gold part up to the front of the lil springs, it took me over 3 hrs to screw it in bro🤦🏾♂️damn neck was killin me cause i was lookin down for that long man
I took it apart to clean it fuck I was getting mad haha tryna put it back together
I’m struggling rn smfh
Exactly what I was looking for. Assembly from start to finish
Man I was struggling for about an HR until I seen this video thank you thank you thank u 🍷💈
Any time! Each one teach one and hand that info down to the next man/woman 👍
Peace!
Thank you for showing how to put it back together 😊
Ok I think there are some lo pros out there with the cam backwards. Took one apart from stock. Fliped the cam over and boom that mid dot on it facing bottom works way better.
Just the video I needed, i got the silver fx and they started making loud noises like rattling. I took apart the blade and was having trouble with the spring part when putting back together. Going to try this again!
Yuurrrr, set it once and forget about! Good deal👍👍
Delace LeCoiffeur update, the trimmer is loud still, no idea how to fix that
@@francis_cw i fucked up my spring somehow too. wont go back in. ruined
I know this video old.....but the issue was the blade follower.....same reason why that blade gets loud.....since then they have corrected that issue
Thank you so much. Wondeful video. Unfortunately, I dropped my machine a few months back. I can't seem to figure out why it's not cutting any longer. I can't seem to get it to cut. There is practically no signs that it was dropped or of any damage. It's expensive and I don't know if I should replace the blade if I just don't know if this is actually where the issue lies. Thank you in advance for an excellent video and for any additional help!
The same happened to mine trimmer: dropped and stopped cutting🤦🏾♂️. Changed out the blade set and the trimmer is running 💯 now.
Good luck 👍
Thank you kindly for sharing your experience and solution! Take care!
@@DelaceLeCoiffeur
Thank u so much for this video!!!!! Iv been at it since like 12pm trying to put mine back together! I feel like I was being trolled while watching other ppls videos on how to fix them!!!!
I’m gonna try the loctite. Thanks.
Great video Delace. Thank you!
Smoking a blunt while zero Gapping my babyliss is heaven on Earth.
Live ya life! 🔥🔥
Bro u just saved my life👌🏼🔥🔥🔥
Saved my life TODAY! Great video!🤺
Me salvaste la Trimmer, saludos desde Perú 🇵🇪
What’s the name of that yellow tool you’re using ?
what size island key / zero gap tool can I purchase if I lose my zerogap tool that comes with the babyliss trimner?
🤔hmm, I've never had to search for the Fx Trimmer zero gap tool before, so, I can't even tell you. But there's good news 😁 and that is if you can get yourself a 1.5mm or maybe a 2mm Allen key you can zero gap using that alone.👍👍
Let me know if you can get your hands onto those 2 Allen keys, ok?!
Good Luck bro 💪 🙏 👍
I bought mine off Amazon and it didn't come with the yellow screwdriver but it's perfectly Zero gapped. Idk if that's an Amazon thing or they just figured everyone was ganna do it anyway.
I just bought some from amazon lol I hope mine comes 0 gapped
Mine came without one of those golden screws above the turn on switch
Lost my hex key no other hex key works so I had to use mini vice grips to loosen. Bad design choice for the screws.
Hi, I’ve been having extreme trouble with getting this blade to screw In because of the reaction of the spring, I’m unable to get the screw to screw into the still blade. Please help if possible.
try using a pair of pliers to gently press the two together in your left hand while screwing the screw with your right hand?
Hey so I just got my trimmer and the black blade or still blade idk how else to call it, it shifts like it doesn’t stay in the middle
(well aligned) I believe that’s what you were trying to fix too right? Any ideas why or how to fix? Any help anybody will be appreciated. TIA!
W video fr, was about to return these but this saved me
Hey is there a easier way to install the spring
With all 3 parts in place, try inserting the long screws thru the blade and into the spring retainer first. This will stop the assembly from sliding out of place. You'll only have to focus on the the screw. Good luck!
Should mine have come with the allen wrench tool?
Man this damn spring is gonna make me do some bad things
Where do i buy the screwdriver from because mine didnt come with the screwdriver
Try looking at the zero gap tool. It’s the handle. I just ordered some babyliss trimmers and was looking for the screw driver. On mines the screw driver is black and not yellow.
Excellent video brother 👌
Thanks, I really truly appreciate the love 🙏
Hello my babyliss detailers out the box , after been turned on the blade slants? It goes completely uneven , what can I do to fix it
Easiest option: return it!
Havent found 1 vid like your awsome!
I’m struggling on that spring part screw it part 😂 From New Zealand
Barber here. Some customers are getting red marks. I have zero gapped it. Any suggestions?
Great video. Do your blade get hot when using?
sometimes yeah! do yours?
Great tutorial
was that small screwdrider with yellow transparent handle included for you ? I dont have that one
Yes, the screwdriver was included with trimmer.
Did you check inside the tin box under the black packaging??🤔
@@DelaceLeCoiffeur hey, thanks, man, I found it. It was actually put into that plastic thing that is used to zero gap the trimmer
The clip was very informative. I was able to solve my problem. Thank you
Very detailed and helpful!!
Thanks you enjoyed it! 👌😎
Great video. I just got a pair. They are the best.
To zero gap it you don't have to take it completely apart. All you need to do is take it off the head, and then slightly take off the screws if you're not using lock tite and put back on.
My trimmer was due for a deep cleaning. But you aren't wrong.
At risk of rounding the screw heads tightening with the blade still on as you are unable to enter the screw fully vertical
Great content you got my like! I like your idea of loctite and using a magnifying glass. Something so simple yet so helpful and practical. I’m heading to harbor freight ASAP today! Lol. Thanks again.
🤲Thank you! Cheers!🍻
Great video sir!! Never thought to use brake cleaner to degrease/remove oil and start with a dry canvas. Excellent!
Thank you.
Yo the Philip screw (the hard one😂) does the small metal screw go in aswell?
I have this trimmer , straight out of the box it pulls hair and also bites the skin . I have tried everything to fix it and it is still doing it .
Try adjusting it to the point a little before it zero gaps it bites the skin when the bottom blade is sticking farther then the upper blade and try not adding too much oil this may be the reason its moving up and biting the skin maybe?
Why do the call them fingers? I’ve never seen them fing before!? Wow, there they go!
How we supposed to see what you done... Lmaooo Mr fast and furious
Hola bro, no sé si entendés esto. Me podrás decir que es el pegamento que le pones a los tornillos para que se deje de mover la cuchilla por favor ?
Needed this to clean my silver Fx and to switch the blade. Thanks! 😃
Glad I could help! The SilverFx are sick 🔥🔥
What a legend i ain’t know that red tool that holds the lil screwdriver is used for a zero gap tool
It's hard to tell what the item is used for, but we know now 🙏
Easy to fix it or So? I recently have bought it.
Thank you bruh. Never could figure out what was wrong I fuckin fixed it thanx to u! You the man of the hour
Good day, you should provide and breakdown in the caption of the tools you used and how to get them, I'm from the Caribbean and I got hell to figure out what loctite is... Question though, what's the situation if you've got to remove them?
How did I miss that opportunity to link loctite in the description 🤦🏾♂️ I will definitely add a link to the product now.
Situation: Cutting blade sliding OUT OF ALIGNMENT due to oil, heat and vibration.
Yea, I wouldn't use loctite on that, he may not get it back off when needed. They do make different strengths, if u try it use the weakest kind of loctite, they have different strengths, coded with different colors.
The spring keeps popping out on mines after I turn on the trimmer after the adjustment
Thank you so much man
I'm in Montreal ddo I'm struggling to zero cap my tools
Hi and thanks for a great video 👍🏻 Just a quick question is this trimmer worth the price or would you recommend something else? Just need it to cut my always short hair real short and trim edges of me beard..
Just got it & I'm not a barber & it's really worth it no lie 💯👌🏾✊🏾
B-MELO B1 thanks mate. Sounds like I gotta try it then 👍🏻👌🏻
It's fire bro, I use it to line up my beard and it looks like I got it done professionally. Definitely worth it over going to the barber every couple weeks.
What happens if the screws are worn down and can’t take the screw off?
I hope that this would never happen, but it should be an easy fix. It would also depend on which screws were worn down. 🤔
Where i can buy The Adjustable zero gap
4:32 why doesn’t my screw not screw-in
I don't know why you're unableable to get the screw to go in 🤷♂️
Where can I find the small gold screws shown at 6:00 . Lost one and need a replacement. Please help someone!
Go to a hardware store and match the one screw you have to a new one and buy that screw. I had to do that cost me only $1 for a set of screws.
Thank you great help
What size is that Allen key with the yellow handle? I never got one when I got my trimmer. It snags like crazy when I use it on the neck 😤😤😤
🤔 Its like 2mm.
Good luck 🤙
Where did you get the screwdriver
The yellow-handle screwdriver was included in the box with the trimmer.
Did your's not come with one? 🤔
Try looking at the zero gap tool. It’s the handle. I just ordered some babyliss trimmers and was looking for the screw driver. On mines the screw driver is black and not yellow.
I lost my yellow screw driver to zero gap my babyliss blade, would a small Hex wrench also work ?
Yes it would that's what I use
I lost mine too I just don’t know size should I use
@@j_2387 1.5mm
@@desmondmitchell5602 thank you 👍🏼
@@j_2387 man u welcome glad to help now get that trimmer tuned up 😁
I’ve been owning one for like 5 months and just recently it started pulling hair
Hey Elvin, that sounds like a dull cutting blade. I suggest sending it out for sharpening. Good luck bro!👍
Did you oil them with clipper oil?
Does anyone know where I can buy a replacement zero gap tool and screwdriver? I’ve lost mine. Or even what screwdriver this is?
Did you find one ?
They don’t sell it nowhere
@@Mr-th5hw never did
Where did you get the zero gap tool?
It came with the trimmer and was part of the included accessories! Why yours didn't come with the ZG tool? 🤔
Thank you for this, very informative & well explained👍
Corded detailers or this babyliss gold fx?👀tryna decide between the two.
You asked the question and the 1st thing that entered my mind was PRICE!
The Wahl Detailers is a hard tool to beat, but DO NOT DROP THEM! They are fragile.
delace1111 yea bro I ended up gettin the babyliss pro FXs. I actually got them brand new for free cause amazon delivered late but i thought they lost the package so I had contacted them
Die hard knicks Fan since I was swimmin in the sack damn thats hella dope man
Excelente tutial me sirvió mucho👍🏿👍🏿🔥
Please tell me where you can buy , replacement tension spring for babyliss pro 880?
AWESOME VIDEO….. VERY HELPFUL! THANKS SO MUCH FOR SHARING!
Glad it was helpful! 😃🤙
Thanks you bro 🔥
Why are mine catching skin😢 they are aligned and everything had dropped them and ot started doing it changed the blade and its still doing it
Hmm, your trimmers were running mint. You happened to dropped them. Since then you have changed the blade and now the new blades are pulling hair. 🤔 How many hours are on the new blades?
@@DelaceLeCoiffeur zero , its more so catching the skin they are aligner and not crooked but for some reason they catch skin its ok when i try it on arm hair its a chameleon fx trimmer but with the gold blade since Babyliss doesn’t support anything in Bulgaria you cant buy the chameleon blade
Thank you man! I needed this vid to reassemble after cleaning the blades.
Thanks, No problem bruh!
You should put loctite on all screws!!!
No lol do not put loctite on the screws lol
I have the same problem, thanks bro you are SUPERMAN.
Problem solved..
Cheers,,,
When I’m trying to zero gap one of the screws won’t even budge to loosen up what do I do ?
Can you please be more specific. Which screw are you referring to?
Hi guys, I have a problem with my machine, the spring broke and I couldn't find a replacement, could you help me?
Can u help me. I have problem a Screw on the left side that allows to zerogap machine so har d I couldn’t twist ii tried so hard and now crewdriver just run throught because hole on the crew became bigger and i cant do anything
Try buy new replacment blade
sid nemroud but they dont come out with plastic piece and screws on it. That what’s broken
Mines fell but not hard n now makes a noise. What do I fix it
Sorry to hear you dropped your trimmer. Open the trimmer up n take a look inside the body.
I need some advice. I dropped my baby bliss and it’s making a loud noise & cuts on one side only. How do it deal with that? Should I buy a new blade or adjust the one of I have cause I don’t see any cracks in the blade
You probably have to tighten the screws. it sucks you dropped them but I went through the same thing lol. I took mine apart & seen no problem but noticed the screw was slightly loosened so I took time to tighten every screw near the blade. If that doesn’t work then idk what’s wrong lol good luck!
@@jramiahwright6258 ok thnx I’ll try that
i got a new gold fx trimmer with the stock gold fx707z blade, it looked to already be zerogapped from factory, i noticed when i use it on really small neck hairs, it seeems to kinda grab/pull, but only when the hair is super tiny, kinda like when its trimmed the day before and just grows a tiny bit. it seems to cut other hairs fine. is this normal? i assume when the hair is super small its kinda coarse, which is why this blade cant cut it properly hence the grabbing/pulling? unless im mistaken. thx
Hey mang, I wouldn't give up on those fxs' just yet. If you say they're new, give the blades some time to break-in and settle. They should get better with every cut.
Last thing, I did find that they grabbed vellus hair, so I use my slimlines in those cases.
Good luck 👍
@@DelaceLeCoiffeur ty so much dw i love em im keeping, also is the blade supposed to be warm after 5 mins of usage? or does that just mean they need oil
The Allen screw on the right side of mine seems like it’s stripped or something. I can’t seem to get it loose using the provided Allen key sent from babyliss 😫
Drop some clipper oil around the screw, had the same issue yesterday and that resolved it 😁
Mine was stripped to so i put a drop of super glue in the screw and put the lil screw driver that comes wit it in the screw wit the super glue still wet . I held the screw driver for a lil let it dry a bit then once fully dry i was able to turn the screw it worked good
Can I send you mine so you can put it together? It’s been a year and I haven’t used it. I can’t figure it out🥺
Hey, sorry to hear about your trimmer. What do you not understand?
were can i get metal plate?
What’s is that metal block he is using?
It's a machine precision 1", 2", 3", block.
Thanks bro
👌We help each other out! Cheers 🍻
Sehr gut danke
Yeah, but the only major problem is, its not that easy. When you got to tight the screws, the moving blade never stays where you put it. It ALWAYS moves when you tighten it down. Im a barber or 36 years. Ive never been able to set liners in one go. It takes days of trial an error with clients and my own skin. Either one side is to sharp or not. The best way is to have the moving blade slightly above the comb blade and youll have to use your trimmers as a bald out blade for abfrw weeks untli the hair sands down the moving blade over a period of time they'll be perfect. Always have extra trimmers for the time being but this has always been the best way for me. Thats with any and every trimmer. Hair does sand down blades. Trust me.
That's what got me here today. The moving blade wont stay in place it still moves smh
Vise grip wrench should help
Where can I get the zero gap tool for the trimmers?
Wahl's online store? Good luck🙏
It should come in the package with the clippers
That tool doesn’t fit this blade 😢