After watching the video on the Angle Driver I went out to the workshop and welded a 1/4" x 4" steel bar onto a 60 degree angle Hex 1/4 " driver and now have a tool that is just like the listed Angle Driver tool with a cost of less than $2.50. Thanks for the video!!
I work on H&V duct in UK, I bought an angled bit holder from Lidl for £3-£4 inc a few bits, I don’t have to use often, same with the Erbauer 6” extension but if I need to get at least 1 more screw in to make the job secure then I think it worth spending a few quid to do a good job, and not a shit one, as for dust extractor I’ve worked with a fitter who bought a Milwaukee, which he was happy with but I think I would rather use a decent face mask.
Same. I've looked around. I read somewhere there that it comes with their drill and bit set. I'm not buying a new drill to get that item. They'd sell a ton of them if they made it available by itself.
@@Boatsidebbq It isn 't even a thing. No offense to the maker of this video, but it is a bit (pun intended) silly to list something as a must have that you can't have.
@@catsandcarsringtailgang6188 I get that guy. but when your roommate goes to college and is asleep in the next room and it goes from one video to the next and the next has super loud annoying music and you got to jump up and try to turn it down before you wake up your roommate it's a little annoying that's all I'm saying.
I bought this and not impressed. We use grade8 bolts so maybe it's better on softer bolts but it has yet to work like the video. Have tried it 4 seperate times. Never once was I able to screw a nut on the end of my bolt. Threads just were not correct. Camera tricks I guess.
3:03 The Moo Moo Man!!!!! He has no face, so he makes the noise, “mooo mooo!! mooo mooo!!!” in great distress because no face.. I want need love the Moo Moo Maaaaan!
I purchased the Chinese version of the Uniburr, and like most Chinese stuff, it's a defective dud; all it does is burnish and dub over the end of a cut bolt/threaded rod. It's useless. Now that I know there's an American made version, I'll have to be ordering one soon.
Wouldn't call No.2 a drill attachment seeing as that's for a hilti concrete drill, and No.3 exists from every brand, personally the DeWalt is my favorite
tiene un inconveniente que si el tornillo sobresale poco el diametro de la herramienta es muy grande y no llegas a poder hacer el chaflan y no hay de mas medidas la herramienta todas son iguales
You lose impact strength with each additional extension. So if you cant crack something loose with two extensions you may with one longer one I assume is what they're getting at
1 no se hace así... Nadie ni en un millón de universos paralelos lo hace así... En mi caso corto derecho con la amoladora angular y no se requieren herramientas extra... 3 había dinosaurios en el tiempo que esa herramienta se inventó... Además nadie por muy estúpido que sea lo va a adquirir sabiendo que el cajón del gabinete se puede quitar... XD
That first one is a game changer for sure.
The threader bit and the drill assist bit would be awesome to have. I keep a 6 inch extension in my impact drill 95 percent of the time.
This products are not available in India, may be .very good
After watching the video on the Angle Driver I went out to the workshop and welded a 1/4" x 4" steel bar onto a 60 degree angle Hex 1/4 " driver and now have a tool that is just like the listed Angle Driver tool with a cost of less than $2.50. Thanks for the video!!
1st Thread Bit...
I have done that with grinders successfully.
But this Bit is It !
Good overall ad here !
Pencil sharpener for metal
yeah angle drivers are awesome... wanted a big right angle drill till everyone started makings these ones. extension bits as ALL bits, are valuable.
I work on H&V duct in UK, I bought an angled bit holder from Lidl for £3-£4 inc a few bits, I don’t have to use often, same with the Erbauer 6” extension but if I need to get at least 1 more screw in to make the job secure then I think it worth spending a few quid to do a good job, and not a shit one, as for dust extractor I’ve worked with a fitter who bought a Milwaukee, which he was happy with but I think I would rather use a decent face mask.
Nothing better than a 'Hilti !!!!!
Pretty cool tools
thanks, these are all drill attachments
@@ZedIOptima thank you
When I was kid I was like “ who the hell would want tools as a Christmas gift !? “ now that I’m 19 tools are AMAZING
Wait till your...40, 50, 60! LOL
so it sucks up the dust so you can dump it on the floor?
From where we get 1st bit i e cutter of bolt ? We are fm india
That's very essentials requiremt tools ,I very like & try to get it's.
Hello
My name is vuguzigire Emmanuel
I leaving in Rwanda Kigali city
I like this thing, but l can not see this Drill .
How can l buy this Drill
Good finds there, pretty useful. For some of them I have my own made-by-me variations but good to know there are such things actually in existence.
Great video. I've tried everywhere to find a Skil Screw Assist. Do you know where they are available? THANKS
its an animation without a real person using it, so i assume its not available
Same. I've looked around. I read somewhere there that it comes with their drill and bit set. I'm not buying a new drill to get that item. They'd sell a ton of them if they made it available by itself.
@@Boatsidebbq It isn 't even a thing. No offense to the maker of this video, but it is a bit (pun intended) silly to list something as a must have that you can't have.
Did you check your links?
Great video but I get super annoyed with the loud background music it's just a pain in the ass
Yeah, if only there was a magic button to stop that annoying noise besides fingers in ears. Right !?
@@catsandcarsringtailgang6188
I get that guy. but when your roommate goes to college and is asleep in the next room and it goes from one video to the next and the next has super loud annoying music and you got to jump up and try to turn it down before you wake up your roommate it's a little annoying that's all I'm saying.
If only someone could invent a mute button
No.3 is awesome....
Number 1 is pretty cool though have never needed it... ?
I bought this and not impressed. We use grade8 bolts so maybe it's better on softer bolts but it has yet to work like the video. Have tried it 4 seperate times. Never once was I able to screw a nut on the end of my bolt. Threads just were not correct. Camera tricks I guess.
that angle driver looks like it's come in handy
Use a short screw driver instead of looking for your drill, angle driver and bits combo. But if you do a lot then go for it.
I keep my right angle attachment in my tool pouch every day
I use the dewalt flexdrive.
Its a lifesaver when doing service
That first one seems very useful
Doesn’t work
at first it was supposed to sharpen drillbits, but it got turned into this bolt fixing thingy
Hi, Where I could buy now the Skil Screw Assist Drill Attachments?
I tried looking on Amazon and nothing came up.
3:03 The Moo Moo Man!!!!! He has no face, so he makes the noise, “mooo mooo!! mooo mooo!!!” in great distress because no face.. I want need love the Moo Moo Maaaaan!
cant see that uniburr lasting very long on wheel studs and motor shafts ???? lol
Como se llama la primer herramienta para comprarla alguien sabe
Oh yeah, already need that first one
I purchased the Chinese version of the Uniburr, and like most Chinese stuff, it's a defective dud; all it does is burnish and dub over the end of a cut bolt/threaded rod. It's useless.
Now that I know there's an American made version, I'll have to be ordering one soon.
Wouldn't call No.2 a drill attachment seeing as that's for a hilti concrete drill, and No.3 exists from every brand, personally the DeWalt is my favorite
Instead of the drill assist to hold the Philips screw, use a Robertson screw which stays on the driver bit
I like all. wish I can have that all.
Malco Extending it's reach, gotta love that one. 👊
It's called a die, a wonderful invention, simple easy to use. No need to mash it with a power tool.
tiene un inconveniente que si el tornillo sobresale poco el diametro de la herramienta es muy grande y no llegas a poder hacer el chaflan y no hay de mas medidas la herramienta todas son iguales
Brilliant all the best
What is the cutter made of?
I want it all.
5 I need!
How much
Having a hard time finding the products shown by using the links given.
I used extension on extension rod and never experienced failure.
It's just marketing.
I have done that before with no problems. The ones that Lowes sells don't last as long as they used to though.
You lose impact strength with each additional extension. So if you cant crack something loose with two extensions you may with one longer one I assume is what they're getting at
Third, is that thing being sold? What is the name?
鍾明均 : it’s called screw assist by Skil Saw.
Really fantadtic
do you actually own any of theses items because all I see is you copied the advertiment
Isso sim e uma ferramenta útil
that malco hand model had too much coffee
The bolt circumcisor looks like its way out of true....really wobbles in the video.
Parabéns pelo belo vídeo. Seu mais novo inscrito de Salvador/Bahia-Brasil.
OK
some of this is doom guy gun contraption
“Do not combine extensions” why what happens ? No one makes a 36” reach
Maybe the ends on those extensions arnt all that strong but ill probably do it anyways 🤣
Ya coud put som-ones eye out kid😉
1 no se hace así... Nadie ni en un millón de universos paralelos lo hace así... En mi caso corto derecho con la amoladora angular y no se requieren herramientas extra... 3 había dinosaurios en el tiempo que esa herramienta se inventó... Además nadie por muy estúpido que sea lo va a adquirir sabiendo que el cajón del gabinete se puede quitar... XD
Am I the only one that noticed the classic game room theme playing at 4:44 ?
Lol. It's been a while since I've visited that channel.
Where can I buy them
Best
No actual video of the screw holder? Hmmmm spidey senses are tingling
crap noise think it’s called music spoilt good video
جيد
Whta name music???
woods
Lol anyone else notice the left handed screw being turned to the right and still going in at 2:55?
Damn! Could you demonstrate without the annoying music???
Yeah, if only there was a magic button to stop that annoying noise besides fingers in ears. Right !?
구매처를남겨주셔야죠꼭필요한건데...
I reckon you would use these gimmicks only once,! 😂🤣🤣
That first one would be a lifesaver
Not if you're a professional.
Too many ads. 👎
Fake sa fonctionne pas l'outil pour chanfreiner j'en est un je les jeter
Legit ads here
Can’t wait till these items are made by harbor freight and cost almost nothing.
Most of them came out crooked
Just leave the nut on make the cut pull the nut off and the it will be fine lol would be nice to have still
New osha rules every company has a dust catcher now nothing new there
I have it, it doesn't work at all
Very bad video as the individual item showed in the video does not have corresponding link. Even not having the item name
If you need a device to assist you putting screws in, your probably in the wrong profession.
*Guy uses dust free drill and then dumps the dust back in the floor*
Dust Free Drill: 🤦🏼♂️
That Hilti is probably $1400
3
👍👍👍👍👍👍👍👍👍👍👍
Hate the music - if that’s what you call it.
Yeah, if only there was a magic button to stop that annoying noise besides fingers in ears. Right !?
The first one is.......Useless. I bought one, unfortunately.
It was a Chinese version.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Screw assist would have come in handy with the ex wife
Just use a hacksaw
for what?
мапиипмт
I dont want any of them. Waste of money!
UNIBAR IS GARBAGE AT ANY SPEED!
Fluff
I ordered one of the unibur tools it will not even scratch the surface on half inch all thread. Piece of shit.
Can't use tools?
Buy this junk instead of learning how!
Very bad video as the individual item showed in the video does not have corresponding link. Even not having the item name