Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
There are lot of “ifs” mentioned here and little action it seems. Where is the data on the water acidity and heavy metal contamination? If the water is being contaminated provide the empirical and historical data to the EPA. Is the ground being tested for wind blow contamination? The EPA is heavily involved in this county given it’s history. What is their conclusion on the mill? Thanks,
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Gordon doesn’t need to hear all this, he’s a highly trained professional !
You’re right, Gordon we have complete confidence in you.
I worked for environmental prior and my studies in air quality proved no such radioactive dust is reaching the reservation
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
There are lot of “ifs” mentioned here and little action it seems. Where is the data on the water acidity and heavy metal contamination? If the water is being contaminated provide the empirical and historical data to the EPA. Is the ground being tested for wind blow contamination?
The EPA is heavily involved in this county given it’s history. What is their conclusion on the mill? Thanks,
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Hello Gordon, Goodbye Gordon!
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Watch the uranium drive in on prime video. Same company was pushed out of Colorado
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Gordon Freeman in the flesh
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
God bless the mill
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
gordon what are you doing?
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
😧
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.
Ribbit.
Just curious. Can uranium mine tailings be SAFEY used as an ULTRA CHEAP sand aggregate tailings SINCE NO ONE WANTS IT BECAUSE THEY ARE SCARED OF IT BY USING GEOPOLYMERS TO LOCK IN ALL OF THAT RESIDUAL RADIOACTIVITY AND IT'S ACCOMPANYING RADIOACTIVE CHEMICALS USED IN PROCESSING IT? The aim is to pour that mixture in a pure geopolymer casing with thick walls and fill it up until it is 12 inches from the top and allow it to dry and pour in a pure geopolymer liquid to seal it off permanently together. The aim is to use these 1 cubic meter blocks as a kind of filler blocks to create mine tailing impoundment dams and reservoirs where non-radioactive mine tailings will be mixed with a mixture of cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass which is pre-dissolved first before it is added with an additional amount of water as they call it into that cement powder and slaked lime powder and powdered brick or powdered sodium silicate powder or water glass mixture (50% silica and 50% sodium carbonate to make it water soluble) and then mix it with these mine tailings to lock in and solidify and stabilize them into solid artificial rocks. Others are using slaked lime and iron slag powder and powdered sand made from ordinary sand or quartz or quartzite or diatomaceous earth or ordinary river sand.