Relume - vintage watch hand restoration. Luminous paint application.
Вставка
- Опубліковано 21 сер 2024
- Relume - How to restore vintage watch hands, continuation of our dial restoration information video.
FIND OUR FUN MERCH:
USA: chronoglidewat...
NON USA: chronoglidewat...
Luminous paint paste. Lumen
Wijzers vullen,
Join our UA-cam channel Chronoglide for more watchfun!
Live Watchmaking. Look through the eyes of a watchmaker and share the passion of Kalle Slaap from team Chronoglide, Vintage Watch repair specialists near Amsterdam.
@ChronoglideWatchmaking
Radium, strontium, tritium, radioactive, alpha, gamma radiation, Geiger counter / teller
Like Random Restoration, I remove/clean old hand lume in a sealed jar inside my ultrasonic bath. In my experience, it does a perfect job - no scraping required at all!! And, the radium is contained in the jar. I use tap water and a few drops of dish soap.
Love the balance tack and the pithwood to hold the hands !
Thank you Kalle
Consider scraping radium with the hand submerged in a liquid (like IPA), then there is no dust.
Yep. I remove radium under water in a disposable container with cocktail stick. Once all removed it can be safely disposed of. I would suggest use of a mask when removing radium hands and dials too. Inhalation is by far the biggest risk.
Better not to do so in IPA... the fumes travel quite a distance. If you do, do it outside and with a mask and glasses.
Thank you very much for all this educational content. I wish you every happiness and peace of mind.
Great video as always
Great Video Kalle. Learned a lot !!
Thank you Kalle!
Thank you for the time and great content 👍👍
Cool, thank you for this useful and helpful tutorial
Thanks Kalle. Mix it with a drop of coffee to get a aged color of the paint.😁
Thanks Kalle, good advice!
Thanks again Kalle
Another great video. I will try the underneath method from now. Thanks.
Thanks for the video - best wishes for the Holidays.
Fill from bottom that is good advice I clean my hands submerged to keep the bad old stuff for contaminating my work space safest and easiest is to replace the hands for me! A great video😃👍
When in doubt whether the dial and hands contain radium, a Geiger counter will give an absolute result.
Most Geiger counters don't react to alpha particles, not as a limitation of the Geiger-Müller tube, but the case of most Geiger counters block the alpha particles.
An alpha particle reaction will produce beta particles as well, any raised numbers on hands or dials on the Geiger counter gives away the presence of radioactive luminescence.
Great content, as always. Thanks Kalle!
Thank you Kalle, I've learnt something new from you yet again as I was taught to lume with the hands face down, occasionally it'd flowover and look kind of 'fat' and need redoing, seeing you do it from underneath it makes total sense and gravity will obviously stop it overflowing!........Thank you again, you're a star.
I clean the hands using IPA in a jar in the ultrasonic, it removes most everything from the hands including old lume , grub, grease, dirt, rust (sometimes) and of course i can dispose of the IPA responsibly should it have radium in the hands, then it's a quick polish, re-lume and it's job done.
Good video, I'm doing this now on a pair of Cartier sword hands with luminova. I prefer a stacking block instead of the pit wood, when working with hands because the support is better in case I'm polishing the top surface. You just need to find the right hole for the hand post to fit not too loose and not tight either.
Also I prefer submerge them into nytroacrylic thinner (or acetone) to dissolve the old luminous paste: scraping them is always very risky: a bit of pressure and you bend them...
Thank you for sharing 👏🏻
very helpful thanks
Good info, thanks!
Ačiū!
Thank you so much!
@@ChronoglideWatchmaking I am a novice watchmaker. Thank you very much for your video tutorials, they gave me a lot of information. Viewed all 64. I'm trying to start repairing watches, I really like it, it's my hobby, but I'm still on my knees for a long time 😀
Greetings from Scotland, late because of the cup final but interested in this topic. I think that my vintage watches have had radium removed
Thanks Kalle- I had not tried the underneath method I have two sets that need relumed today- I will give it a try today! Also, I have much difficulty with the proper 1/1 proportions and a single 'drop' of lacquer poured out of the bottle like you demonstrate...
I felt as I watched how carefully the knowledge and experience was tried to be conveyed. I have a question about removing micro scratches that are not mentioned here. How effective would it be to polish hands with 10k or 30k diamond powder paste? Could it be peeling off because the coating is so thin? Because the nickel plating of the movement was removed when I used silver polishing paste. Of course, I later learned that the reason for this was a chemical used in the paste.
Haha you found the picture 😉👌👍🇩🇰
Just so simple :D missed it again :D Not Watch but Wash.
In my experience, it's best to use the minimum amount of binder (varnish as Kalle calls it) to achieve smooth results. Otherwise, the hands won't glow as brightly as possible because the lume particles aren't as tightly grouped - they're not as dense as they can be. But, if there isn't enough binder, the results will be lumpy. So, in my experience, it's difficult to get just the right amount of binder in the pigment.
Exactly. Moreover, if you paint it upside-down the bigger, brighter particles will settle on the top of the hand making it brighter. Also, if you wait after mixing, the bigger particles settling on the bottom of the pot and you will mostly grab varnish an small dust with the applying tool.
Clean printer paper works treating for polishing as well.
Fantastic video and what a wealth of information. I am looking to refinish my Omega Flightmaster orange color dials. Do you recommend a certain paint manufacturer/color?
man that looked so easy but if someone tries it by himself oh god watching is damn pretty easier than doing it by yourself🤣
Where can I purchase the leather files? I leave in the U.S. I love you channel and have learned so much. Thank You!
Hi Kalle, been watching your videos for a few days for informations regarding vintage watch restoration.
I bought a vintage 1981 watch and was wondering if it is possible to relume Tritium filled stick indexes directly applied on the dial? Cheers
Thank you very much for your in depth explanation, Kalle. I have a dial and hands from an old German pocket watch that I will be re-luming at some stage. I've been wondering about removing the lume (probably Radium) under water, in a dish, to eliminate any risk of dust. How best to dispose of it afterwards? Flush it down the toilet; cover the dust with varnish and put in the bin? Keep up the good work. Really enjoy your videos. Have a good Christmas. Cheers from Australia
Thanks Kalle! If they are filled in black, what material would that filling be?
Old radium / zinc sulphide mixture likely contaminated with oil
Great video as usual!! Just a question, is it OK to use IPA for lumed hands? will IPA affect the lume?
Thanks Kalle, and keep 'em coming!
Dear sir , i am in Greece and I am interesting to repaint my citizen aqualung ‘s watch hands by you .Is it possible to send them asap?
My 1990 Rolex Dj 36 16233 no longer luminous since less than 2 weeks ago. Is there a way to restore it without replacing its original Tritium dial, hour & minute hand each then? Thanks
any reason not to put the watch hand upside down on the holder and put the paste in that way?
Now you see the end result immediately, the clients view. Good question!
:)
Whats the hardner you are using?
With this product no hardner is needed, just leave it for about an hour. Good luck!
Or you could just not use any radium components. It's radioactive, just get rid of it, and get as far away from it as you can. 1964 is an old enough watch... just my personal opinion.
I thought watches had ‘fingers’ and clocks had ‘hands’.
Thank you Kalle!