Nice wheel mate. So disconnecting the battery is a must? And would u take out any fuse to the air bag at all? I'm replacing the clock spring and just wondering how to go about it.
Awesome video mate! I’m trying to replace my fly by wire and accelerator pedal in Ford falcon ba 2005. Apparently I have to remove the whole steering column. Do you know if this is true.
Hey mate my ba steering wheel only gets 1 and a quarter turns to the right, and just over 1 and half to the left lock to lock. Is there a way to adjust? Reckon wheel is put on wrong?
Mate when your taking out the back 2 bolts. Did you have to reconnect the battery so you could turn the wheel the opposite way to get the other bolt out?
I didn't, as long as the key is in the acc or on position the steering lock should be disengaged, allowing you to rotate the wheel. It will be difficult though as with the engine off, no power steering.
You'd think the MOMO steering wheel would be some nice sporty style thing, instead it looks like the regular XR6 leather wheel just with a small MOMO embossing on it. I'm very disappointed with Ford and with MOMO for cheaping out and using a stock style wheel
do you know what other features are included in the rip curl edition, I have a non-turbo 4 speed bf which comes with the momo wheel and shifter, but that's all I really know about it. cheers :)
As far as I know, they came with 18'' wheels as pictured, standard was 17''. They also had the "Rip Curl" badging on the rear of the cab, the momo steering wheel and neoprene seat covers which were placed over standard BF XR seats, the seats themselves are the same as any other XR.
The original one on the car looked better in the video, it was all cracked and worn, there was no avenue to restore it, it was also originally grey. I replaced it based on factory spec sheets.
Thanks Mate, I will save this video. I have to straighten my steering wheel soon
Great and easy to understand tutorial. Cheers mate
About to do my BF xr6. Very handy. Thanks
Hello EO, thanks for the video I’m replacing mine tomorrow. Well presented tutorial. 😀👍🇦🇺
Thanks, good luck with it.
It was a piece of cake, I swapped out the steering wheel with a wreck I got and re installed my original air bag. Thank you once again. 😀👍🇦🇺
@@peterantonic6923 Good to hear it went well, not a bad car to work on at all.
Looks great. Well done.
Nice work mate. Learnt alot. Thanks
Any tips to get the locking clips for the horn assembly in? Mine jams the horn on when I tighten it up
Thanks very helpful vid! Would this be the same for a 2001 AU11, also are the two t30 torx screws 5 or 6 pointed? Cheers!
Good job I’m trying to do a au thanks for posting 👏🇦🇺👍Robbo
Nice wheel mate. So disconnecting the battery is a must? And would u take out any fuse to the air bag at all? I'm replacing the clock spring and just wondering how to go about it.
Excellent video. Going to go change mine now
Thanks, Good luck
@@echooscar6670 went well. Wouldn't of without your video
Great clip, keep m coming 👍
Awesome video mate! I’m trying to replace my fly by wire and accelerator pedal in Ford falcon ba 2005. Apparently I have to remove the whole steering column. Do you know if this is true.
According to the manual, yes you need to remove the steering column first.
Great video mate! Good find on eBay, that replacement is mint :)
Thanks Andre, more to come soon.
@@echooscar6670 awesome mate looking forward to it 👍🏾
Hey mate my ba steering wheel only gets 1 and a quarter turns to the right, and just over 1 and half to the left lock to lock.
Is there a way to adjust? Reckon wheel is put on wrong?
Great video
Do you need to go in the fuse box and remove the airbag fuse
Thanks for the video
Thanks, hope you enjoyed it.
Where did you get the wheel from?
Mate when your taking out the back 2 bolts. Did you have to reconnect the battery so you could turn the wheel the opposite way to get the other bolt out?
I didn't, as long as the key is in the acc or on position the steering lock should be disengaged, allowing you to rotate the wheel. It will be difficult though as with the engine off, no power steering.
I replace my steering column but now I am getting a airbag light, why is this?
You'd think the MOMO steering wheel would be some nice sporty style thing, instead it looks like the regular XR6 leather wheel just with a small MOMO embossing on it. I'm very disappointed with Ford and with MOMO for cheaping out and using a stock style wheel
Nice 👍🏼
do you know what other features are included in the rip curl edition, I have a non-turbo 4 speed bf which comes with the momo wheel and shifter, but that's all I really know about it. cheers :)
As far as I know, they came with 18'' wheels as pictured, standard was 17''. They also had the "Rip Curl" badging on the rear of the cab, the momo steering wheel and neoprene seat covers which were placed over standard BF XR seats, the seats themselves are the same as any other XR.
@@echooscar6670 good to know, cheers man
How much was the nos steering wheel?
Skip 2 minutes if you are in a hurry.
Hey mate do have a video to remove the clock spring
I don't sorry Ben
Where did you buy the replacement steering wheel from?
I got it from a seller on eBay
The old wheel wasn't that bad, the new one looks Grey, prefer the old one
The original one on the car looked better in the video, it was all cracked and worn, there was no avenue to restore it, it was also originally grey. I replaced it based on factory spec sheets.
How tight did u do the bolts bc my horn goes off and then when I undo it the horn stops
Not sure which bolts you're talking about, but it seems you may have a connection problem in the horn wiring or clock spring.