Great video! Just a question, what if the power, ink and paper tray (!) button are all lit up? I'm also getting an error that says "ink absorber is full". Thank you so much 😊
Had the same problem with my t420w as well.. "ink absorber full" ..tried the manual hard reset and through brother software resetting but neither of it worked.
Hi, my yellow tank is ful but on the print quality sheet, yellow ink is missing. I've tried cleaning 7* with strongest setting but still not working with yellpw
If your printer kept on printing blank pages, try to clean its print head. ua-cam.com/video/S0xWgcHt8AU/v-deo.html ua-cam.com/video/V7PMORBAJ6o/v-deo.html
I have done all the steps with the video, but when it came to the colors check, the paper came out with just black colors. Do you know what should I do?
Hello, my name is Mauro and I am from Brazil. Recently I purchased a DCP T420W here in Brazil but this specific printer did not run on my MacBook Air. The Brother iPrint is way too weak to handle simple jobs. Do you know any app/software etc that makes the 420 run normally in a Mac Os environment? Thank you very much; Prof. Mauro Leira
Hello, when I open my printer, the warning led lights are blinking as well as the power on led light but wifi led light is not blinking, when I followed what you did, it didn't work. What do you think is the other possible solution here? Your answer will be much appreciated thanks.
If your WiFi LED is not blinking it simply means you are connected to a network.. Are you trying to run a maintenance check or resetting your WiFi settings? This video might help you as well 😸 m.ua-cam.com/video/7CqteG1m5aI/v-deo.html
Hi, first make sure to check the level of ink in the tank. Then, you can try cleaning the print head of your machine. ua-cam.com/video/V7PMORBAJ6o/v-deo.html
What if after all the maintenance mode was followed and all of those did not print any test page or the maintenance page. The green button, light and ink red buttons are still on. What happen to my printer?
hello po, ask ko lang ano kaya problem ng printer ko same model, nagkakaron sya ng mga excess na black ink guhit mula taas hanggang baba, parang galing sa shark teeth, pano po kaya un maaayos? salamat po
Hi! how much ink have you put in? If you have put just a little... You can resolve this issue by cleaning the print head. It may require 10 to 15 cleanings to clean the ink tubes and print head.
hello po maam ask lang po ako dahil may nabili po kaming printer na bago Brother Printer DCP-T420W. kapag nag priprint na po kami gamit ng photo paper bakit po putolputol po yung picture maam tas may line po? salamat po maam sana po masagot.
Thank you for this ma'am pero paano po pag low quality yung color after ma-print? Kahit sobrang tinted nung picture na ipiprint ganun pa rin po, e lalo na kapag black? Hope you notice this, thank you! 😊
hello po, yung printer ko po minsan parang gumagalaw yung nasa ilalim kahit wala naman pong prini-print tapos nag oon po yung warning light, what should i do po?
hellow po..pahelp nmn po..ano po kayang problema ng printer ko,,pag po ngpiprint ako natigil n po xa ng pag print pag nasa kalahati n po ng piniprint,,pero pag sa xerox nmn po ok nmn po..ano po kayang problema at ano po kayang magada kong gawin..bago pa lng po printer ko brother dcp t420w po ang brand.2months ko pa lng po nabibili..sana po matulungan nyo po
The ink led light is blinking even after clicking stop. My DCP-T420W is still new and the ink tanks have been just filled for the first time. Also, I made sure that I was filling the tank with the correct color.
Thanks for the demo it helps a lot, no need for technician
Glad it was helpful!
Helped me a ton! Very handy for those who would like to DIY
Thank you! Please don't forget to subscribe ❤️
i recently bought t420w and im looking foward for more maintenance or tips how to prolonge this kind of printer subscriber here thanks..
Watch out for more tutorials. Thank you!
It worked! Omg! Thank you so much!!!!! 🥺🤩😍🥰🥰
You're welcome! Please don't forget to subscribe for more upcoming instructional videos 👌 Thank you.
Thanknyou its helped me a lot!more videos pls
Hi! what do i do if the ink light keeps blinking? all inks are okay, not out of line.
Very nice information then clear
So nice of you. Please don't forget to subscribe. Thank you!
Thank you. Done my maintenance. Very helpful.
Great video! Just a question, what if the power, ink and paper tray (!) button are all lit up? I'm also getting an error that says "ink absorber is full". Thank you so much 😊
watch out for that video. working on it.
Yo también tengo el mismo problema y nose como solucionarlo!!!!
when are u going to upload video tutorial about this matter mam. Thank you.
@@rossarts5364 soon ☺️ watch out and turn on notifications. Thanks
Had the same problem with my t420w as well.. "ink absorber full" ..tried the manual hard reset and through brother software resetting but neither of it worked.
How can I to resolve "ink absorber Is full"?
Thank you. Amazing video
Reset your printer
Thanks. Great help
Done running maintenance check thanks very mauch
Please don't forget to subscribe for more upcoming instructional videos 👌 Thank you.
Thank you ma'am great video very helpful
Please subscribe for more videos. Thank you!
Thank you so much! Very helpful!
You're welcome!
Thank you ma'am great video very helpful🙂
Thanks for liking
Nice video 😮 very detailed
Thank you!
Thank you po. What if po kung ung ink ay nagb-blink padin even madami pa siyang ink?
Thank you for your help. God Bless!!!
Glad it helped!
hi i will ask how to print a cheque in this printer
your reply is big help thanks
Nice video
Nice video. Well M color is not printing red color. It is printing blue (C) color. How to fix?
Do you have a product review of brother dcp t420w?
video tutorial for unable to scan problem on dcp-t42ow please
You have to check the flex cable
thank you very much!!!😊
Please don't forget the subscribe 🫶 Thanks!
Hi, my yellow tank is ful but on the print quality sheet, yellow ink is missing. I've tried cleaning 7* with strongest setting but still not working with yellpw
Very good
thanks for this video
what should i do if the printer cannot print 3B & need to confirm the actual amount of remaining ink by looking through the window of the ink tank?
Very helpful
This is the first time to use new brother t220 and there are problem in printing colors . Test page without color.
Just black only … what can I do
I have a problem with the colors. The blue and the yellow. There's enough inck, but they have disappeared.
What can I do?
Thank you. Your video is very helpful.
Wow It worked!!
Great job, thank you
Hi is the printer compatible with macbookpro or macos bigsur?
Hi, can u please tell me or make a video why printer is printing blank pages even though I have ink? thank you.
If your printer kept on printing blank pages, try to clean its print head.
ua-cam.com/video/S0xWgcHt8AU/v-deo.html
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
Can the above method work with the DCP-T220?
yes
hi! pano po ayusin yung may roller mark (hindi ink) pag nag piprint sa photopaper??
I have done all the steps with the video, but when it came to the colors check, the paper came out with just black colors.
Do you know what should I do?
No printing on the paper afyer following maintenance check. Is there something wrong with the printer head? There is still ink inside the cartridge
same 😭 naayos mo na po ba yung sayo?
What do i do if the black ink doesmt work but is full?
Same issue with my printer
se le hace reseteo de almohadillas como a epson ?
English Please. Thank you.
Hello, my name is Mauro and I am from Brazil.
Recently I purchased a DCP T420W here in Brazil but this specific printer did not run on my MacBook Air. The Brother iPrint is way too weak to handle simple jobs.
Do you know any app/software etc that makes the 420 run normally in a Mac Os environment?
Thank you very much;
Prof. Mauro Leira
420w won't Run on MAC, Mac supports 520w model
Good Morning! May I ask po if you have a solution for multiplt feed paper problems? I have this problem po kasi especially when printing double sided.
Hai...this model don't have display so we can't copy more than 1 piece papers right?(copy without Computer)
This model has a function to copy multiple pages.
ua-cam.com/video/_Mrv2ycwByA/v-deo.html
Ho do you experience an error Cannot Print 48? If yes whats did you do?
Thank you 🥰
Hello, when I open my printer, the warning led lights are blinking as well as the power on led light but wifi led light is not blinking, when I followed what you did, it didn't work. What do you think is the other possible solution here? Your answer will be much appreciated thanks.
If your WiFi LED is not blinking it simply means you are connected to a network..
Are you trying to run a maintenance check or resetting your WiFi settings? This video might help you as well 😸
m.ua-cam.com/video/7CqteG1m5aI/v-deo.html
@@aivlogsorig Same problem with him, when I checked to brother website it says "Machine Error"
Saved my day. Thanks
Ma'am my printer is having some ghost printing issue? Do you how to fix this? It's the same model with yours
Might upload a video related about that soon.. Just turn on the notification bell for updates.. thanks 😊
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
Might wanna watch this video. Thanks ☺️
Hello, what do I do when there's several colors wrong with the quality test page?
Hola, sabras algo para lo siguiente "Machine Err 3000" seria de gran ayuda indicarme como resolverlo
Hi to to fix the alignment of this type of printer
Maam anong kailangan dcp r420w ba ulit ang ink ink ang pwede pag nag refill
Yes, we recommend using genuine brother ink intended for your specific machine. Thank you.
what to do if there's a gap in the print quality?
Hi, first make sure to check the level of ink in the tank. Then, you can try cleaning the print head of your machine. ua-cam.com/video/V7PMORBAJ6o/v-deo.html
WONDERFUL
بلازحمه عليج ممكن تشوفيلي ليش ماتطبع كتابه واضحه الطابعه وليش تطلع غير متصله
Hi. I did a maintenance check ... can I know what the meaning of the printed paper is ... and the writing on the printed paper is a bit vague
Please make sure that you have enough ink.
Then, you can follow the procedures on how to clean the print head of your machine.
I'm getting a blank paper when I'm trying to print any think
Hello.. what should i do if my printer only print green color?
Try cleaning your machine's print head. Thank you.
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
All test pages are empty.. so what is the issue??
in my brother dcp t420 printer a paper is jammed but i am not able to see it from back side.what to do?
Remove the paper try and try to pull the paper out from the front of your machine
how to deal with a cartridge on a brother dcp-t420w that is not working perfectly, such as cleaning it
hi. magenta and yellow are blank, how to fix this? hank you.
Hi! Clean your machine's print head. I already made a tutorial video on how to. Thank you.
Hello po, Paano po sakin Mam, kong may mga underline po yong piniprint ko?
This might help you 😊
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
300 GSm pe Print karne pe Ink spill horai hai Brother DCP t420 model.How to solve it?
What if after all the maintenance mode was followed and all of those did not print any test page or the maintenance page. The green button, light and ink red buttons are still on. What happen to my printer?
i think that's "ink absorber full" error which needs a replacement which will cost you
pano po gagawin kapag wala pong cyan color n lumalabas.??. thank u so much
I've done my maintenance but the color magenta and cyan are still not printing as it's color.
Hi! You should try cleaning the print head of your machine. Thank you!
ua-cam.com/video/S0xWgcHt8AU/v-deo.html
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
hello po, ask ko lang ano kaya problem ng printer ko same model, nagkakaron sya ng mga excess na black ink guhit mula taas hanggang baba, parang galing sa shark teeth, pano po kaya un maaayos? salamat po
Why is my new Brother DCP- T420W printer producing blank pages when I print?
Hi! You can try resetting your machine. Thank you.
ua-cam.com/video/LRfpEVAwFDY/v-deo.html
what if the rollers are too tight that it marks on photo paper?
Hi, can you help me about my printer problem 🥺, my printer scan doesn't work, it's the same printer as you have, it's say's cannot scan AF
Please make sure that the USB cable are connected from the machines to your PC/ Laptop.
How can we fix the complete colors of our printer? Same brand
how to the flash clenar
This might help you 😊
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
Hi Gus pm po Panhellenic Neman po if what to do when you put wrong ink color in the thank of dcp -t420w ? Thanks in advance
Hi! how much ink have you put in? If you have put just a little... You can resolve this issue by cleaning the print head. It may require 10 to 15 cleanings to clean the ink tubes and print head.
Thank you
How about if all lights are turned on?
Hello how about if I followed that and all test prints are blank?
Please make sure that you have enough ink.
Then, you can follow the procedures on how to clean the print head of your machine.
Thanks 😍
What if after this, the print quality still has issues like blank areas?
Hi, you can do this process 2-3 times till there's no gaps on print sheet. Thank you
hello po maam ask lang po ako dahil may nabili po kaming printer na bago Brother Printer DCP-T420W. kapag nag priprint na po kami gamit ng photo paper bakit po putolputol po yung picture maam tas may line po? salamat po maam sana po masagot.
Try cleaning your machine's print head. Thank you.
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
Thank you for this ma'am pero paano po pag low quality yung color after ma-print? Kahit sobrang tinted nung picture na ipiprint ganun pa rin po, e lalo na kapag black? Hope you notice this, thank you! 😊
Same issue with mine. Na solusyonan mo ba yung sa yo?
hi po ask ko Lang bakit po ayaw kainin po Yung photopaper kahit okay Napo Yung lagay Ng paper tapos po biglang namula Yung ! thank you po sa sagot
Copy and print black and white clear aatta nhi ha.
Kay problem hoogee
i follw the first step and when I print ut's only blank sheet.how to know if there is no ink?
Please make sure that you have enough ink.
Then, you can follow the procedures on how to clean the print head of your machine.
"Cannot start updating the firmware.
Device in use, try again when the device is idle."
How to solve this ?!
Thank you
Hi! Make sure that no one is using your printer. This means no printing, scanning, or copying. Then try updating the firmware again. Thank you.
Its work sinabayan kita ok namn kaso may tanong is pano ibalik conect sa wifi ulit yung printer ko salamat
How can i reset the ink box? Ink aborber box is full problem. Thank you
watch out for that video. working on it.
ua-cam.com/video/V7PMORBAJ6o/v-deo.html
Might wanna watch this video. Thanks ☺️
hi. can you show us how to reset ink absorber from the maintenance mode pls?
thank you po
Please don't forget to subscribe for more upcoming instructional videos 👌 Thank you.
sis short bondpaper only?
Long press power button.
Nope. You can also use A4 or long size paper
How to fix t420w blank paper in Xerox please make a video po ma'am thank you
hello po, yung printer ko po minsan parang gumagalaw yung nasa ilalim kahit wala naman pong prini-print tapos nag oon po yung warning light, what should i do po?
GOOD MORNING PO!PAANO PO MAGTANGAL NG INK SA INKJET?PWEDE GAWAN NG VEDIO.
Thanks mam
Please don't forget to subscribe for more upcoming instructional videos 👌 Thank you.
I don’t know what is the problem I did all the steps and it only bring empty papers out,pleasee help
Please make sure that you have enough ink.
Then, you can follow the procedures on how to clean the print head of your machine.
hellow po..pahelp nmn po..ano po kayang problema ng printer ko,,pag po ngpiprint ako natigil n po xa ng pag print pag nasa kalahati n po ng piniprint,,pero pag sa xerox nmn po ok nmn po..ano po kayang problema at ano po kayang magada kong gawin..bago pa lng po printer ko brother dcp t420w po ang brand.2months ko pa lng po nabibili..sana po matulungan nyo po
tuwing kailan po need mag maintenance check?
We recommend to do it at least once a month. Thank you.
The ink led light is blinking even after clicking stop. My DCP-T420W is still new and the ink tanks have been just filled for the first time. Also, I made sure that I was filling the tank with the correct color.
Just click the color button for 3 seconds and wait until the light stop blinking. It will print your ink quality check sheet. I hope this will help.
@@edrdnywn2762 thank you so much! Big help 🤗
Thankss