tumbling block end grain cutting board how to make it
Вставка
- Опубліковано 28 вер 2024
- Hi
This is most difficult board I ever made. I explain in this video what mistakes I made and how to avoid them. lesson learned. have a fun and make one :)
/ rswoodland
/ rswoodlandwoodworking
Every board you made is piece of art 👌
Thank you sir 😉
Nicely done! None of us do perfect work, it always has a flaw somewhere.
Yeah, especially when we do something at first time. Second attemt will be better :)
Ficou top muito linda está tábua pra churrasco, deu trabalho mais valeu a pena, meus parabéns amigo!!
Muito obrigado :)
Nice job , I will try it out for my next project
thank you and good luck :)
Lindo trabalho, mestre. 👏👏👏
Gracias;)
Nice Job compa voy a ver si hago uno
Thanks. You will do it 😉
@@rswoodland8162 nunca e echo una y no soy aficionado a la carpintería and you not but im workig in a carpinteri pero mire tu trabajo y me gusto good job
Ya tengo toda la madera cortada mañana empiezo a pegarla
La cage pero ya tengo madera lista para otra🐴
Gorgeous!
Thank you
You sir, are one of the masters in making beautiful cutting boards. And a gentleman, for showing us how to do it.
Thank you 😉
Nice
Thanks
that glue is very expensive, only cardboard paper also can be used for structure
This glue is not cheap but its food safe when fully cured
Колдун
это доска очень шикарноя
The built is great. But what I want to mention is that you explain the essential steps and leave out everything else. This makes it more compact and you still get everything that is important. Thank you!
No problem sir 😉
WOW!!!!
Thanks ;)
Maravilloso, 👏👏👏,un trabajo así, es resistente a las caídas?
I wish you would explain in more detail how you put this together. I cannot figure out how you start. You put slices on wood and don’t explain what you’re putting it on!!
One board? Four cut boards? If so how wide ? Which wood ?
Help!!!
You can find answer to all your questions in the movie but you need to watch it carefully. Anyway I will try to help you.
0:24 - diagram shows you what wood goes first
0:30 - it shows that I start from elm and mahoganny. I show it and say how many board you would need plus dimensions
0:35- I say I start first layer with maple
I hope it helps and you will enjoy your board when you finish it 😉
That board looks great. I haven't tried that pattern yet.
Thank you 😀
Thank you for your inspiration and sharing your talent.
VERY impressive.
Thank you 😉
The 2 finished boards at the 4:13 mark. Are the core boards (20 mm) the same species? Or is one mahogany and the other elm. This tumbling block pattern is very cool
Mahoganny and elm. 0:24 on the clip you can see a drawing. Look at mahoganny in the core, it turns to elm after 3 seconds. I should separate that 2 photos. In the clip they look like 1. I still do better boards than video clips 😀
Beautiful work, you have inspired me to make this board
You are welcome 😉
Wow 👏 Great job 👍
Thank you :)
What was the liquid you used at the end?
Its a mineral oil
👏👏👏👏👍👍👍👍💗💗💗💗💗 Bravooo pak saya suka tutorial anda👍👍💗💗
Thank you 😉
Great ❤
One of the coolest cutting boards I have seen. Good job
Thank you sir ;)
Cat caught your tongue?
Did you not learn to read in school?
Great video and very nice board. What were the final dimensions on the board?
sorry I dont know how i missed your comment. Anyway I can not remember the final dimensions
Thank you for explaining how you do this particular pattern for a cutting board. Thank you! Thank you! Thank you!!
You are welcome 😉
Just subbed, great work my dude
Thank you :)
I want to try to do that, but this is too difficult for me.
believe in yourself and give it a try :)
That cutting board is BAD-ASS! Great job 👏🏼
Thank you 😀
How on earth have l been making shit for 45 years without calipers?
How much time did you spend on this
Sorry I missed your comment. I can not remember but It was about 20hrs in total I think
Very nice. Thanks for sharing. Keep these videos coming!!!
Thank you 😉 I will
Che bell' oggetto. Sei fortunato a fare questo lavoro ed essere così abile.
🤩
Thank you 😉
Outstanding Sir!
Love that the details and measurements are on the screen.
Pity they’re not in Imperial, but Metric will do!
Saved!
Thank you. I understand only metric :)
Awesome. How do you deal with snipe?
Thanks 😉 No snipe from my mashine or its so small so I can not even notice it
Amazing, thanks for sharing!
You are welcome sir :)
Love the video but man I really wished that you guys stop using MM and go back to the inches/ft measurements!!
I wish but I do not understand imperial measure system
@@rswoodland8162 oh great, I don't do the millemeter measurements!! Lol Oh well thanks for the reply! What a super nice job though!
@@thevoiceofthelordpastorkei7165 thank you very much :)
I started converting inches to mm & cm when I started making end-grain cutting boards. It made them so much more accurate.
You realize every other place in the world almost uses metric right?
Stunning!
Thank you! 😊
the best. I love it.
Thank you
Very impressive. Thank you.
You are welcome 😉
Solid work! Saw it on the FB Group!
Thank you 😉
Superb👌
Thank you
The best my frend
Thank you 😉
Que coisa mais linda 👏👏👏👏
Thank you 😉
Nice work.
Have done a few 'magic eye boards'.
Biggest mistake for me - - - - used too much mineral oil for finish. The wood soaked up the repeated applications eagerly. Then the hydraulic pressure inside the material overpowered the glue and caused split a few of the seams.
Sorry to hear that. I have had no problems with splits but I do not use too much mineral oil and I do it always min 48 hrs after gluing
❤❤❤
thank you
🎉
Thank you 😉
WOWWWW
Super job
Thank you 😉
Just beautiful.
Thank you 😉
Looks great
Thank you 😉
Good one
Thank you ;) I hope plan is clear to understand. If you wanna make this one just watch full video. I showe all my mistakes. Good luck
Amazing 🤩
Thank you :)
U really doing good job bro…. I really love your works…. De sky is ya limit
Thank you sir :)
WOW!!!!!!!!!!
Thank you 😉
No! Thank you your work is amazing!!!