0:25 that's a triple tatami? I only ever attempted cutting a Double roll, and this went right through, with very little resistance. Obviously a good cutter, it's a Machete, that's what they do, but the arm shows remarkable skill in that demonstration. Those things are tougher than they look!
Psiberzerker Yup, I was also surprised since usually for a target that big, you need a long blade to generate the momentum and slicing motion. I mean like, if you’re gonna be trying a triple with a machete, it’s gotta be a 24” blade. But it looks like that was the 18” or 21” version.
excellent demo, Mr.Thomson you love blades and it shows!!! i never thought much about machetes, due to their thin spine....but your video is an eye opener. Please do a video regarding the 1849 Rifleman's knife....give us the historical background, your opinion regarding the effectiveness of this blade and please show us just what i can do....or can't...!!!!!
Cult Of Malgus Yes, his strike was not well delivered. Play it at 0.25x speed and you’ll see how the machete strikes the target. Lynn himself has said it before, sometimes he messes up because he substitutes too much power for technique. But, what the hell. Their machetes are 1055 spring steel, so just bend that sucker back to the original alignment.
@@Divine_Serpent_Geh they need to make a mid-tier 1075 model. Something in the $50-$60 range that can compete with Condor without being quite as expensive.
Cult Of Malgus in my opinion a machete doesn’t have to be expensive to be good. It’s a sharp piece of properly treated carbon steel with a basic handle.
@@Divine_Serpent_Geh depends on your application, what you want out of it, what you expect out of it. For a regular garden, backyard, trail chopper, sure I agree. But in a survival scenario off the grid? I want a machete that can cover a wider variety of tasks including combat scenarios and extreme wilderness survival. For that I really want a slightly thicker 1075 blade over these thinner 1055's. That said I buy these cheaper CS machetes for training purposes mostly and simple back yard tasks. For cheap blade with more applications cold steel's GI Tanto is a great choice. I keep that and my Finn Bear in a Survival pack with medical supplies, fire starter, MRE snacks, water filter, etc.
Cult Of Malgus How thick do you mean? In my opinion, a machete shouldn’t exceed 3mm spine thickness (1/8”). I know these cold steel machetes are 2mm thick, if the blade is 24 inches long, that can feel floppy. Personally I have a custom made machete that had a 22.75” blade and is 3/32” (~2.5mm) thick at the spine. For the length it’s just about right, not too floppy that it twists and turns in powerful cuts and chops, and not to stiff that it has no flex or feels overly heavy.
The Name Unless the tip is modified, meaning sharpened on purpose. It theoretically COULD be used to thrust. But fundamentally, no. The Latin Machete is meant for chopping or slicing (if it’s sharp enough). Machetes in general are not meant for thrusting, since they are tools, not swords.
Currently I have two 18" inch Latin style machetes, they are just so good for the price. I also had the 21" one hand version plus the two hand version and 24" inch one hand version but I sold them. Now I have ordered a 21" inch version with a D-guard because I need a battle machete :D
Oh yeah. All the sword machetes they make that have some sort of hand guard have the full tang cutout in the shape of the guard. The Kopis Machete does too.
Mark Stockford It is delivered that way do you can put your own edge on it, for what kind of work you will be doing with it. Also sharpening = time = money
Marian Iurea Not necessarily. His strike and edge alignment was horrible. Slow it down to 0.25x and you will see how twisted the cut was. Another thing, a spring tempered blade CAN take a set. even though it is spring tempered, it is only 2mm thick. It’s easy to see why it bent.
Moth Nibbas Jason should have actually used a D-guard machete like this one. That way, Freddy wouldn’t have been able to slice his fingers off and take his machete lol
Is it just me, or Lynn can't cut for shit and nobody ever tells him just cause he's the boss? I just binged the whole IRON PROOF MACHETES playlist, and there ain't a single strike where he goes all the way through in one swing, or one where he lands the blow where he means to.
LFPS0311 Yeah, that’s pretty much true. I like Cold Steel and I like Thompson. But good lord, that strike on the ballistic leg was awful. Way too much unnecessary power and horrible edge alignment. Shows how important technique is. If you slow it way down, you can see how the machete hit and literally twisted. Hell, I could’ve probably made it all the way through that thing in one swing.
Because you want some paper-pusher designing weapons? Nothing shows competence like the boss of the company showing passion and expertise about its products.
The machete line is mostly, not entirely, different kinds of swords made out of a specific kind of steel that is more appropriate for a machete than a sword. They still cut like the swords they are replicating they just arent as pretty.
@@MFM556 not as tough either tbh. Watch the vid again. He bent the damn blade, which is disheartening to say the least. But if you buy them using them as a trainer in place of a sword they tend to be heavier....meaning they can give you strong sword arms! In that context I love these things!
I love the videos where Lynn talks about the product.
The Cold steel machette line is just kick ass. Love these things. Amazing blades for the price. Cheers 🍺
1:18 *never doubt me Mr. Thompson. I never lose filipino machete battles*
💀
I'm getting one for Christmas 😃
*El machete, el fiel compañero. Saludos.*
0:25 that's a triple tatami? I only ever attempted cutting a Double roll, and this went right through, with very little resistance. Obviously a good cutter, it's a Machete, that's what they do, but the arm shows remarkable skill in that demonstration. Those things are tougher than they look!
Psiberzerker Yup, I was also surprised since usually for a target that big, you need a long blade to generate the momentum and slicing motion. I mean like, if you’re gonna be trying a triple with a machete, it’s gotta be a 24” blade.
But it looks like that was the 18” or 21” version.
Impressive, I don't actually own a machete. I just wish that you provided them with a good edge out of the box. Like you do with your knives.
use accusharp sharpner for like 10 bucks
DUDE....THESE ARE RAZOR SHARP OUT OF THE BOX.I MEAN DANGEROUS SHARP😂.YOU WONT BE DISAPPOINTED 😂
Damn I miss seeing him...... So sad he sold out (but I'm happy for him if he got compensation for the awesome company he built).....
excellent demo, Mr.Thomson you love blades and it shows!!! i never thought much about machetes, due to their thin spine....but your video is an eye opener. Please do a video regarding the 1849 Rifleman's knife....give us the historical background, your opinion regarding the effectiveness of this blade and please show us just what i can do....or can't...!!!!!
Jason Voorhees like it
Joni Exe Lol Nice one. Bet he does.
I love the D ring on this and the Cutlass
I got one for my birthday two days before Christmas 🎈❤️❤️❤️
2:54 he bent it lol
Cult Of Malgus Yes, his strike was not well delivered. Play it at 0.25x speed and you’ll see how the machete strikes the target. Lynn himself has said it before, sometimes he messes up because he substitutes too much power for technique.
But, what the hell. Their machetes are 1055 spring steel, so just bend that sucker back to the original alignment.
@@Divine_Serpent_Geh they need to make a mid-tier 1075 model. Something in the $50-$60 range that can compete with Condor without being quite as expensive.
Cult Of Malgus in my opinion a machete doesn’t have to be expensive to be good. It’s a sharp piece of properly treated carbon steel with a basic handle.
@@Divine_Serpent_Geh depends on your application, what you want out of it, what you expect out of it. For a regular garden, backyard, trail chopper, sure I agree. But in a survival scenario off the grid? I want a machete that can cover a wider variety of tasks including combat scenarios and extreme wilderness survival. For that I really want a slightly thicker 1075 blade over these thinner 1055's. That said I buy these cheaper CS machetes for training purposes mostly and simple back yard tasks. For cheap blade with more applications cold steel's GI Tanto is a great choice. I keep that and my Finn Bear in a Survival pack with medical supplies, fire starter, MRE snacks, water filter, etc.
Cult Of Malgus How thick do you mean? In my opinion, a machete shouldn’t exceed 3mm spine thickness (1/8”). I know these cold steel machetes are 2mm thick, if the blade is 24 inches long, that can feel floppy.
Personally I have a custom made machete that had a 22.75” blade and is 3/32” (~2.5mm) thick at the spine. For the length it’s just about right, not too floppy that it twists and turns in powerful cuts and chops, and not to stiff that it has no flex or feels overly heavy.
love how the brother assumes we are going to run into black beard 😂
Nice video! Is this the 18" or 21" version, is not mentioned in the video?! Stay healty...regards from the Belgian Ardennes.
@Cold Steel Is latin machete good for thrusting along with slashing?
The Name Unless the tip is modified, meaning sharpened on purpose. It theoretically COULD be used to thrust. But fundamentally, no. The Latin Machete is meant for chopping or slicing (if it’s sharp enough).
Machetes in general are not meant for thrusting, since they are tools, not swords.
Currently I have two 18" inch Latin style machetes, they are just so good for the price. I also had the 21" one hand version plus the two hand version and 24" inch one hand version but I sold them. Now I have ordered a 21" inch version with a D-guard because I need a battle machete :D
Shinobi Hiriyu - Original Ninja Love your vids! You should make some machete vids. I’d like to see the 24 in action. Must be a big boy.
2:55 the blade is insanely bent
The blade looked like bent after he cut the ballistic gel 😅😅
It bent only after 1 hit
2:57 *looks like Mr. Thompson and I have the same Filipino machete battle stance*
Well you just got another customer for this blade simply because of the metal in the D guard I had no idea it was THAT well made for that price..
Oh yeah. All the sword machetes they make that have some sort of hand guard have the full tang cutout in the shape of the guard. The Kopis Machete does too.
Is that spring steel or just 1055
Master Tracker thanks bigfella....I think it's usually you that helps with my questions lol much appreciated
I'm good at stock removal but not forging and heat treating
@2:43 look real close the Blade is a bit Bent......this the 29 inch version i recommend the 26 or 23 inch......the 29 inch is much to long and flimsy
Got it. Great Machete
Howcome these Latin machetes do not come sharpened?
Mark Stockford It is delivered that way do you can put your own edge on it, for what kind of work you will be doing with it.
Also sharpening = time = money
@2:43 blade is bent out of shape interestingly ...could be from other tests
Best machete
Big Chip Was this the 18" one?
When Lynn hit the fake leg the machete bent
最近買った！大満足である
what martial arts involves mass amount of cheeseburgers?
dont insult people asshole
The Name LUL
What martial art involves being an asshole?
@@gunkid6368 jelous ass lil beach
Primer comentario me gusta el contenido
What edge angle did you guys sharpen the machete at? (What degree)?
DJHamburgla Depends on what you want to do. My Katana Machete is around 20-25 degrees.
Anybody notices the blade was bent after the cut? Bad temper on that blade.
Marian Iurea Not necessarily. His strike and edge alignment was horrible. Slow it down to 0.25x and you will see how twisted the cut was.
Another thing, a spring tempered blade CAN take a set. even though it is spring tempered, it is only 2mm thick. It’s easy to see why it bent.
Which one is that? (length)
JAY LEE Looks like the one Lynn is using is the 21” blade version.
Why didn't Lynn mention that
Ilove in i dont have a garden, I live in in England and I already have too many sharp things but I still want one.
The machete bent
It's only 2mm thick.
For thirty bucks I had to buy it!
This is how to be real Jason Voorhees
Moth Nibbas Jason should have actually used a D-guard machete like this one. That way, Freddy wouldn’t have been able to slice his fingers off and take his machete lol
Is it just me, or Lynn can't cut for shit and nobody ever tells him just cause he's the boss? I just binged the whole IRON PROOF MACHETES playlist, and there ain't a single strike where he goes all the way through in one swing, or one where he lands the blow where he means to.
LFPS0311 Yeah, that’s pretty much true. I like Cold Steel and I like Thompson. But good lord, that strike on the ballistic leg was awful. Way too much unnecessary power and horrible edge alignment. Shows how important technique is.
If you slow it way down, you can see how the machete hit and literally twisted.
Hell, I could’ve probably made it all the way through that thing in one swing.
😁
"Yes boss!"
Oh shit if you look you can see the machete bent
I carry spartan daily and now with gazillion of macheetes available i chose that d gaurd killing machine
That fat guy at the end.. Is a master Phillipino martial arts.... WAT..... Next joke please 😂🤣
Eslam Asem that’s Lynn Thompson the head of cold steel
Zombie Clad he's still a fat guy to me
Eslam Asem Lynn is a beast, don’t let looks deceive you.
I know he’s a legend If you ask me
thats his physical size but he can fight.
Applause to Cold Steel
1min 51sec see the microphone
If cold steel is shooting for that infomercial feel they freaking nailed it. I do like cold steel products but lynn needs to stay in his office
Because you want some paper-pusher designing weapons? Nothing shows competence like the boss of the company showing passion and expertise about its products.
MiregalForges fanboy triggered😁
colt45 and2zigzags Yeah, because explaining the new style of marketing is totally getting triggered.
The guy's point is that Lynn is about as likeable a guy as Rosie O'Donnel after three minutes without her Prozac. The dude makes my skin crawl.
he may not look the part but he is pretty handy.
nice
Sad these are being made in China now using crappier steel and an even crappier handle polymer
Yesssss
Wow
if you dont love machetes, i really want to know what planet your people are from.
(my walking stick is on its way! hell yeah)*
I literally have too many and I still want more.
Gold Stall
caralho :)
Vau I Ded knif e firms
I want to see Lynn in a brier patch doing work...Niw that would impress the hell out of me.Machetes are tools not swords!
The machete line is mostly, not entirely, different kinds of swords made out of a specific kind of steel that is more appropriate for a machete than a sword. They still cut like the swords they are replicating they just arent as pretty.
@@MFM556 not as tough either tbh. Watch the vid again. He bent the damn blade, which is disheartening to say the least. But if you buy them using them as a trainer in place of a sword they tend to be heavier....meaning they can give you strong sword arms! In that context I love these things!
@@cultofmalgus1310 he could have made it bit more thicker