Hmm, this may wind up being my new rescue boat. Make a fitting to hold and push a U-shaped PVC pipe and BINGO! No more worries about the weeds! Thanks for a great design!
I have printed out all the files. The hull looks ok, but the motor mount, and propeller guard cage are useless. Nothing fits, nothing works. I am printing out a new motor mount that actually fits between the tower guards, and will manually drill the holes and raise it high enough so the 8 inch prop I bought (as your specs call for) actually clears the hull :). I am trying to figure out why you would post a bunch of files that don't work....scratchin' my head on that one.
@@Mr.RC-Creator It's NOT distortion. This design is USELESS! The Motor mount is too wide to fit between the tower guards, the Propeller cage designed for another boat,....Did you take someone else's design and mix it with your own? There is absolutely no thought put into this piece of garbage.
Thanks for the sharing. I was just started this build. There is nowhere I can find the servo box stl file（the green piece at 1:20 of the video）. Would you mind fix that on thingiverse? Thank u very much.
for the rear upper deck, did you cut down the gaurd mount and made your own? i see the files are there but there's no option for the one without the guard mount
Great build :-) but it looks like you did some additional design of the cage and seats as they are not in the file set from "Cr. Slightly Abnormal STL File" anything you want to share :-)
@@Mr.RC-Creator Downloaded the files and there seems to be som issues with them, looking at your nice video, if I want to use "Swam_boat_Tower_Gruad_Mount" I'm missing the Plate_mount that fits that. Also the Gruad set-up is a bit tricky to figur out based on the different files that you have uploaded.
i just recently downloaded files off of thingaverse and i am printing now, there is one file im not sure on and that is the foot box, when i open the file in the slicer programe there is nothing there, am i doing something wrong ? everything else has printed fine im looking forward to this awesome project
Hmm, this may wind up being my new rescue boat. Make a fitting to hold and push a U-shaped PVC pipe and BINGO! No more worries about the weeds! Thanks for a great design!
Thank you very much for your comments.😉
Looks very fun!! Well balanced machine
@Job91 Thanks😁
Looks nice👍
Thanks! bro 😊
@@Mr.RC-Creator nice that you still look in the comments after a whole year
@@FIashOOT Thanks very much for the follow up.
I have printed out all the files. The hull looks ok, but the motor mount, and propeller guard cage are useless. Nothing fits, nothing works. I am printing out a new motor mount that actually fits between the tower guards, and will manually drill the holes and raise it high enough so the 8 inch prop I bought (as your specs call for) actually clears the hull :). I am trying to figure out why you would post a bunch of files that don't work....scratchin' my head on that one.
Thanks for all the feedback.
I use all those shared files as well. There might be some distortion from printing. I really apologize.
@@Mr.RC-Creator It's NOT distortion. This design is USELESS! The Motor mount is too wide to fit between the tower guards, the Propeller cage designed for another boat,....Did you take someone else's design and mix it with your own? There is absolutely no thought put into this piece of garbage.
@@illwind9429calm down
Thanks for the sharing. I was just started this build.
There is nowhere I can find the servo box stl file（the green piece at 1:20 of the video）. Would you mind fix that on thingiverse?
Thank u very much.
Sorry to rate reply!! you download Agianwww.thingiverse.com/thing:5938567
@@Mr.RC-Creator Thank u so much. Just in time. I was planning to do the assembly at the week end：）
Looks good might just print this 👍🏻
Thanks a lot. 😊
for the rear upper deck, did you cut down the gaurd mount and made your own? i see the files are there but there's no option for the one without the guard mount
Try agian 🙂www.thingiverse.com/thing:5938567
Great build :-) but it looks like you did some additional design of the cage and seats as they are not in the file set from "Cr. Slightly Abnormal STL File" anything you want to share :-)
www.thingiverse.com/thing:6004487/files
@@Mr.RC-Creator Thanks, looking great think it will be the next project for the Bambu X1C
@@Mr.RC-Creator Downloaded the files and there seems to be som issues with them, looking at your nice video, if I want to use "Swam_boat_Tower_Gruad_Mount" I'm missing the Plate_mount that fits that. Also the Gruad set-up is a bit tricky to figur out based on the different files that you have uploaded.
Saw this on thingiverse today. I gotta build this!
It 's fun. 😀
Super cool!
Thanks.😁
Hello, can you please publish the stl file for the servo mount Thank you
File name! Swam_boat_mount_motor_pro.
Thank you for posting the servobox.stl
what parts was used for the steering love the build
@T_Browell152 Large dual rudder control servo!!
@@Mr.RC-Creator thank you so much!!
😁
Very cool!
@BC Hobby. Thanks,😁
i just recently downloaded files off of thingaverse and i am printing now, there is one file im not sure on and that is the foot box, when i open the file in the slicer programe there is nothing there, am i doing something wrong ? everything else has printed fine im looking forward to this awesome project
Thank you so much!
@@Mr.RC-Creator any idea on the box foot file
i got it figured out ,, there was a problem with my slicer programe , i got it sorted now and i am printing box foot now
@@larz0001 I don't remember! sorry🤔
All built now just got to install radio and motor
👍
Thanks.😁
how do you mount the swam_boat_Tower_Gruad_Mount to the Swam_boat_Plate_mount 2. the one one the plate mount is smaller then the tower gruad mount
I'll check the file again.
Ok thanks
@@Mr.RC-Creatori love the boat. I done printed everything but that then peaces
@@1983cll Try agian
Hello P& P,
Cool as a project.
Where can we find the files please ?
Cordially
Link www.thingiverse.com/thing:244...
@@Mr.RC-Creator Thanks 😉
ทำขายไหมครับ
ไม่ได้ทำขาย..ครับ..ไม่ค่อยมีเวลาเลย ขออภัยครับ..