I used this video today to repair a disc drive from a console I got from goodwill. For me it was the belt being dirty causing the tray to not open. Cleaned that and it is opening again. Thank you sir!
I bought my 360 about 10-11 years ago when they were only out a few years. I got it for $60 when they were reselling used for $100-150 more than that because the drive wouldn't open, and it came with no cords or controllers. I just pried the face off and dealt with it not opening for years. Not sure why, but I guess I decided to fix it, and watched this video. It's been working perfectly for a few days now, and I don't know why I waited so long to fix it. For the first time since I've owned this machine, the face facade is in place and the drawer slides out every time! Thanks!
Thanks for the video. I didn't even think to check out the motor. My motor was seized. Applied oil and after a while of manually spinning the motor, it freed up.
My disc try was kinda odd one right, first it was dusty so that wasn’t helping it lol I cleaned it but the interesting thing was it would come out on its side but not vertically it did eventually after some tries but on its side it would come out like oh 90 percent of the time perfectly it had a quacky thing where it would come out…. But still automatically go back in like if it did come out and didn’t touch one of the sensors in there now there were times where it would be real visible that it was still jamming or well getting stuck because I would see the motor was still trying to move the tray with the square rubber band and it would technically be crooked by just a fraction of an inch but you can see it when it happens it’s quite interesting to see actually. Oh I have changed the band only at that time I had gotten a lot of them cheap to I just replaced it (just going to put out there those are real similar to woman’s hair bands they are the exact same looking I just can’t tell yet if they are thinner or thicker and you can get those even cheaper) I replaced it without opening it too ok so the whole clean hasn’t happened yet till I tried it out like that it improved immensely because it can open standing up now but still would get stuck and that’s when I opened it to clean. Best thing I ever did, also Microsoft was a complete moron because they NEVER added white lithium grease to the rails and gears of the system like WUUUUT??? when I clean everything and did that it was night and day if I’m right I did that separate too, like I cleaned it all perfectly and then put it together dry with no grease (now I wanna open it to clean again and grease the worm gear and rails to the laser because I never did that) and yeah it was more reliable dust free, still jams occasionally at that time. Then I put the grease in the little teeth it has on the where one gear meshes with and some grooves underneath the tray, worked like magic it’s been dead reliable ever since and I love it now. Oh if you want to clean the old band and help it still be tight you can put it in some slightly boiling water for 8 ish minutes it’ll help take the dust off and shrink it a small amount for better grip oh and grease the sliding part that’s on the front of the laser too that helps it hinge up and down that’s connected to the cd motor assembly. The original 360 was built so robust it’s great yeah it’s noisy and stuff but it’s one of the “easier” one to take apart to service and fix too, I want to change the thermal paste on it now because I’m sure I haven’t yet but I ran out doing that for other consoles I had I even want to like liquid metal the one that has the copper heatsink on it to see if that would be a good idea to do but that’s a project for another day
What if the rubber band in my Xbox fell out prior to anything? The tray will only open halfway and as I said, the rubber band is already out. Any suggestions would be appreciated
Problem I’ve got I take the top of the disk case off then open the disk tray it opens up smoothly and closes smoothly but soon as I put the top case on again it jams again any ideas?.
My friend, I have a problem with Xbox One. My space was 700 GB. I formatted the Xbox, and suddenly my space became 365. Do you have a solution I hope so
i recently installed a new "deck" in my xbox 360 dvd drive but it keeps dropping, (like when you eject the disc) and the drive wont eject at all, can anyone help? please and thank you.
After cleaning the laser discs are still unreadable. It's not a disc problem, i checked. How can i solve this? Also i have a small Grey cushion i don't know where to put back,.. Thanks in advance
when i put a game in i get a screen with the xbox 360 logo and the words xbox 360. similar to when you first turn it on. it plays movies just fine. also when i put a brand new game in it said play game and the cuts to black then back to play game. how do it fix this whats wrong?
The most bizarre DVD tray opening suggestion I ver saw. Why te heck manufacturer built in "HOLE" (and mechanism) for emergency release in every disk drive I ever saw?
Thanks for this video. I still cannot get the drive to read the disk. Its xbox 360 slim, used for around 2.5 years now, minimum use only. The lens looks good. However, it does not read the disk. Any suggestions?
I did this years ago but I remember right you need to get a sata cable to hook up to your computer and disc drive with (one cord powering it from your xbox) and there is some program that's used that's pretty straightforward.. I just don't remember for the life of me what it was lol
Loe im watching in Philippines can u help me after 50 cent games said updte but i updte and failed to updte and said not detect dics tray please help me 2006 mnf
I used this video today to repair a disc drive from a console I got from goodwill. For me it was the belt being dirty causing the tray to not open. Cleaned that and it is opening again. Thank you sir!
I bought my 360 about 10-11 years ago when they were only out a few years. I got it for $60 when they were reselling used for $100-150 more than that because the drive wouldn't open, and it came with no cords or controllers. I just pried the face off and dealt with it not opening for years. Not sure why, but I guess I decided to fix it, and watched this video. It's been working perfectly for a few days now, and I don't know why I waited so long to fix it. For the first time since I've owned this machine, the face facade is in place and the drawer slides out every time! Thanks!
I heard that my old Xbox got stuck in the tray and the disk wasn't recognized on and off, so this was a great help. thank you
Thanks for the video. I didn't even think to check out the motor. My motor was seized. Applied oil and after a while of manually spinning the motor, it freed up.
Thanks man working till 2 at night to fix my Xbox 360 very useful
this is the best way i have found
How I fixed is I applied some oil on the back of the engine and it started to spin again.
Is it possible that the disk doesn't spin fast enough when it is reading to properly read, that is why you get a false reading?
I have both problems. Opened it up cleaned inside and still have both problems.
My disc try was kinda odd one right, first it was dusty so that wasn’t helping it lol I cleaned it but the interesting thing was it would come out on its side but not vertically it did eventually after some tries but on its side it would come out like oh 90 percent of the time perfectly it had a quacky thing where it would come out…. But still automatically go back in like if it did come out and didn’t touch one of the sensors in there now there were times where it would be real visible that it was still jamming or well getting stuck because I would see the motor was still trying to move the tray with the square rubber band and it would technically be crooked by just a fraction of an inch but you can see it when it happens it’s quite interesting to see actually. Oh I have changed the band only at that time I had gotten a lot of them cheap to I just replaced it (just going to put out there those are real similar to woman’s hair bands they are the exact same looking I just can’t tell yet if they are thinner or thicker and you can get those even cheaper) I replaced it without opening it too ok so the whole clean hasn’t happened yet till I tried it out like that it improved immensely because it can open standing up now but still would get stuck and that’s when I opened it to clean. Best thing I ever did, also Microsoft was a complete moron because they NEVER added white lithium grease to the rails and gears of the system like WUUUUT??? when I clean everything and did that it was night and day if I’m right I did that separate too, like I cleaned it all perfectly and then put it together dry with no grease (now I wanna open it to clean again and grease the worm gear and rails to the laser because I never did that) and yeah it was more reliable dust free, still jams occasionally at that time. Then I put the grease in the little teeth it has on the where one gear meshes with and some grooves underneath the tray, worked like magic it’s been dead reliable ever since and I love it now. Oh if you want to clean the old band and help it still be tight you can put it in some slightly boiling water for 8 ish minutes it’ll help take the dust off and shrink it a small amount for better grip oh and grease the sliding part that’s on the front of the laser too that helps it hinge up and down that’s connected to the cd motor assembly. The original 360 was built so robust it’s great yeah it’s noisy and stuff but it’s one of the “easier” one to take apart to service and fix too, I want to change the thermal paste on it now because I’m sure I haven’t yet but I ran out doing that for other consoles I had I even want to like liquid metal the one that has the copper heatsink on it to see if that would be a good idea to do but that’s a project for another day
My Xbox 360 premier will restart when I close the disk tray. Do you know what may cause that
How easy should the motor spin by hand? If you give it a good spin should it continue moving for a moment, or immediately stop?
What if the rubber band in my Xbox fell out prior to anything? The tray will only open halfway and as I said, the rubber band is already out. Any suggestions would be appreciated
Its the mechanism it self or the tray motor I recommend you to swap your dvd drive entirely with a working one
How do you remove the Tray from the optical driver?
Problem I’ve got I take the top of the disk case off then open the disk tray it opens up smoothly and closes smoothly but soon as I put the top case on again it jams again any ideas?.
My friend, I have a problem with Xbox One. My space was 700 GB. I formatted the Xbox, and suddenly my space became 365. Do you have a solution I hope so
i recently installed a new "deck" in my xbox 360 dvd drive but it keeps dropping, (like when you eject the disc) and the drive wont eject at all, can anyone help? please and thank you.
You know what Algerian just passed here, we are the arrival to get back palestine
you sure you commented on the right video?
My xbox 360 only dvd read not read the games what are going to do sir
After cleaning the laser discs are still unreadable. It's not a disc problem, i checked. How can i solve this? Also i have a small Grey cushion i don't know where to put back,.. Thanks in advance
when i put a game in i get a screen with the xbox 360 logo and the words xbox 360. similar to when you first turn it on. it plays movies just fine. also when i put a brand new game in it said play game and the cuts to black then back to play game. how do it fix this whats wrong?
How can i open the 360 slim manuelly ?
The most bizarre DVD tray opening suggestion I ver saw. Why te heck manufacturer built in "HOLE" (and mechanism) for emergency release in every disk drive I ever saw?
It does have a hole this guy just didnt use it
@@charg1nmalaz0r51 Yes, it was rhetorical question.
Thanks for this video. I still cannot get the drive to read the disk. Its xbox 360 slim, used for around 2.5 years now, minimum use only. The lens looks good. However, it does not read the disk. Any suggestions?
This video isn't for the xbox 360 slim
My disk doesn't want to open all the way
Thank you
How do you flash an Xbox 360 drive
I did this years ago but I remember right you need to get a sata cable to hook up to your computer and disc drive with (one cord powering it from your xbox) and there is some program that's used that's pretty straightforward.. I just don't remember for the life of me what it was lol
Its not spin
THANKS
Loe im watching in Philippines can u help me after 50 cent games said updte but i updte and failed to updte and said not detect dics tray please help me 2006 mnf
stop calling it an engine