Your skin can easily absorb chemicals on it's surface, especially gasoline. If you are going to use gas or other fuels to clean at least wear heavy gloves to protect yourself (or working with any chemical). Other than that this is the best maintenance video there is for this bike!
Would love to see a video explaining how to completely remove the carburetor on the TTR 50. I started to remove it then stopped. I need to get that Welch cap out to get to the throttle screw.
Hey mate thanks for the video helped me heaps with my service, could you help me with a problem I'm having? I can't get it to idle it just stalls I have to hand the throttle a little for it to keep running, I've adjusted the idle screw and it's all the way in I can't go anymore also adjusted the throttle cable screw near the carb, thanks Sam
Hi Zac, if you loosen the main axle nut you can then adjust the two nuts on either side to either tighten the chain by turning them to the right or loosen it by turning them to the left.
I just bought one for my Grandson and this will be my weekend project. Thanks for the Video !
Spot on video, well done, straight forward and no nonsense. Thanks ! will be doing this exact thing this weekend
Well done good sir! I just bought my son a 2020, ill give it a good looking over.
Great Video ! I just bought a new one for my Grandson and want to take great care of it. Thank you for doing this !
Great video, very helpful. Thanks!
Great video mate! Helped me service the lads bike for the first time 👍
Thanks for your video, very straight forward and helpful 👍
Love the video. Did a service on my Pw50 with my 5 and 7 yr old. They had a ball
Very helpful just bought one for kids needs a service. Very informative
Your skin can easily absorb chemicals on it's surface, especially gasoline. If you are going to use gas or other fuels to clean at least wear heavy gloves to protect yourself (or working with any chemical). Other than that this is the best maintenance video there is for this bike!
Great video and advice. Clean, simple and no unnecessary waffle. Subscribed!
Great video
Great video, thanks!
Would love to see a video explaining how to completely remove the carburetor on the TTR 50. I started to remove it then stopped. I need to get that Welch cap out to get to the throttle screw.
Thanks Jesse! Subscribed
Hey mate thanks for the video helped me heaps with my service, could you help me with a problem I'm having? I can't get it to idle it just stalls I have to hand the throttle a little for it to keep running, I've adjusted the idle screw and it's all the way in I can't go anymore also adjusted the throttle cable screw near the carb, thanks Sam
Thanks mate
Can the clutch be adjusted on a '22 TT-R50?
Why do you use semi synthetic and not fully?
How often do you replace or clean the oil screen?
K adjusting the chain was not very clear tell me what to loosen first then what?
Hi Zac, if you loosen the main axle nut you can then adjust the two nuts on either side to either tighten the chain by turning them to the right or loosen it by turning them to the left.
@@jessesshed2928 thanks man