Homemade Miter Saw Build Part 1 // Gönye Testere Yapımı 1. Bölüm
Вставка
- Опубліковано 6 лют 2025
- in this video serie which contains two videos, i'll be making a miter saw from 18mm plywood and a circular saw. You can find the measurements and material list at the end of the part 2.
the protractor's link: s000.tinyupload...
İki videodan oluşan bu seride 18mm kontrplaktan ve bir daire testereden gönye testere makinası yapacağım. Ölçüler ve malzeme listesini ikinci videonun sonunda bulabileceksiniz.
Gönye dosyasının linki: s7.dosya.tc/ser...
If you can find something better than this channel on the internet I can not. Thank you for this because I just enjoy watching your work.
This guy is the only real DIYer on youtube...
Ну какой же вы умница ! Я восхищён всеми вашими станками и приспособлениями! Вам 1000 лайков только от меня !
Посмотрел в поисковике линейные направляющие и блоки линейного движения. У нас на них цены бешеные.Всё что у вас применено на станке обойдётся примерно в 8000 -10 000 руб. У нас за эти деньги можно купить готовую пилу.
А такая отличная была идея !!!
Правильно! Весь мир должен ориентироваться на российские цены! Пускай удаляет видео!
@@deserteagle1166 ему возможно и без российских цен придется удалить видео если анонимность окажется под угрозой, т.к. он создаёт шайтан-машины, а на его родине такое строго карается.
@@ВладиславЛитвинов-е2с амортизаторы с уазика по 100р на металоприёмке.Я себе 6шт купил=D
@@victorzarubin4323 ну сами амортизаторы это ещё не шайтан-машины
DIY kavramına Level atlattırdınız yine. Her zaman ki gibi hayranlıkla izliyorum...
in this video serie which contains two videos, i'll be making a miter saw from 18mm plywood and a circular saw. You can find the measurements and material list at the end of the part 2. the protractor's link: s000.tinyupload.com/?file_id=96233280749072652895 İki videodan oluşan bu seride 18mm kontrplaktan ve bir daire testereden gönye testere makinası yapacağım. Ölçüler ve malzeme listesini ikinci videonun sonunda bulabileceksiniz. Gönye dosyasının linki: s7.dosya.tc/server14/vnpuvv/gkmn_gonye_-_protractor.pdf.html
File was deleted by owner or exceeded maximum storage time (100 days from last download).
Same with me. File deleted, bla, bla, bla.
@@ZIQUIZIRA34 s7.dosya.tc/server14/vnpuvv/gkmn_gonye_-_protractor.pdf.html
hope your file will be up again!!!
File is deleted.
I’m seriously in awe of your creativity.
Your videos have inspired me to build my own tools. I’ve made one of your sander already and on my way building your router table. So thank you.
I had this idea too but didnt build it myself! Then i see this video and now it will be easy to build one!
I said it before, you Gökmen are a genious!!!
Это гениально. Да это работа целого конструкторского бюро! Как ты это придумываешь! Я в восторге!👍👏
I am thrilled to see someone make homemade tools and actually USE them, unlike some other channels. Great job! Looking forward to your future projects!
Дружище ты наверно не поймешь, но тем не менее: от отвоих видосов у меня возникает неконтролируемая эрекция! Ты идол!💪
You amazed me with these things you accomplished. It gives ppl hope for us who can’t afford expensive tools that build yourself is indeed possible. Your clips are truly motivational. Keep up the good work.
Mesin serut kayu osen
Мне нравится, что использует в работе, свои предыдущие инструменты, сделанные самим собой.
İş yerinde, kendimle yapılan önceki araçlarımı kullanmayı seviyorum. emin değilim doğru yazdı.
Мало того - машинка универсальная и разобрать сложить места много не занимает . Мне лично его поделки в тему 👍
Ellerinize sağlık,gerçekten de sağlık emek veren eller yara bere içinde ama ortaya çıkan güzel fikirler ve bu beğeniler o yaralara su serpiyor.
Videolarinizda kullanginiz malzemelerden tutun kesilen ölçülere kadar butun bilgileri veriyorsunuz. Allah işinizi gücünüzü rast getirsin. Cok yararlı videolariniz var. Hersey için tesekkurler.
Ellerine sağlık ustam. Muhteşem bir ürün. Çok başarılı.
Bonjour monsieur Bravo avec un grand "B" pour toutes vos réalisations vous etes un prof du bois et en matière d'économies chapeau !!!! je suis Fan .....
Четко и понятно сделано, без музыки и слов👍.
Valahi var bir imreniyorum bu yapılanlara zevkle izliyorum her evde bulunan basit aletlerle koca bir atölye kuruyorsun emekli olim ilk isim bende başlıcam eline saglik
Teşekkürler Erhan bey, inşallah en kısa zamanda hayalinize kavuşursunuz.
Какой спец, можно только позавидовать. Из подручных материалов(фанеры) делает классные инструменты и главное сам на них работает.
Lovely Video! Sorry for butting in, I am interested in your thoughts. Have you heard about - Schallingora Dexterous Programme Scheme (do a search on google)? It is a smashing one off guide for building any shed in no time with no experience minus the headache. Ive heard some decent things about it and my BF finally got astronomical results with it.
На сколько это точный
Современем оно искажается фанера не металл же
Interesting. Really enjoy your projects. Thanks for sharing 📏📐
You've produced a very common thing there and very cleverly made too. I look forward to part 2
Almost all who watched may already have a mitre saw.. 😀. But it is so interesting to watch a craftman do it at his shop.👍👍
True. But this is so compact. If i were able to make this myself, I would sell my "real" one.
@@hansdegroot8549 😀. Kind of.. but I would think a 7¼ inch sliding mitre with bevel would be about same size. Maybe a couple of inches taller, but comes with better ergonomics, and no cable in the way. Having said that, one could use just the circular saw for, mitre and table saw.. 3 in one😊
I actually do not have one and i am here to get inspiration
after watching several videos of yours, my hat off to you Sir. You are amazing, you've earned yourself a subscriber
Bravo, Gökman, you are Genius and the nr 1 on my subscriptions list next to Prof. Matthias Wandel.
It's always a pleasure watching your videos showing how to build complicated tools the simple way and also using them in all your projects too. Looking forward to see part 2 of this project. Wish you a good weekend from a sunny Germany. Rgds from Robert
Ну блин дружище, не перестаешь удивлять :) Отличная идея!
Супер! С нетерпением буду ждать продолжения. 🎥
Damn. You're the McGyver of our generation. Amazing creativity and ingenuity
Красавчик ничего не скажешь!
The idea of building a mitersaw is just awsome. I loved it to watch you building it! this is an awsome video
Selâm alyküm kolay gelsin ustam hayallerime ilham oluyorsun aklına fikrine eline sağlık testeren Keskin yolun açık olsun vesselam
Aleyküm selam, çok teşekkür ederim yorumlarınız benimde hevesimi canlı tutuyor.
Maşaallah, Allah nazardan korusun. Sen gerçekten bu işin dehasısın
Teşekkür ederim Hakan Bey, yorumlarınız moral ve güç veriyor.
То видео, за которое уже с первых секунд ставишь лайк !
Бош всемирно известный производитель в мире, самый лучший инструмент
Произведенный в Китае, работает пока действует гарантия!
@@СергейНаумов-е1н ну не знаю у меня много инструмента бош и нигде нет на нем бирки маде ин китай, инструмент вечный
@@sergij.pro. завидую белой завистью, думал так же, купил блендер БОШ, гарантия закончилась, электрическая энергия в нем тоже.
@@СергейНаумов-е1н бывает
Like before watch the video,you are genius man!
milli gururumuzsun be koca yürekli adam
Gökmen usta her zaman ki gibi mükemmel proje tebrik ederim imreniyorum çalışmalarına küçük bir yer ayarlaya bilsem keşke kendime kolay gelsin iyi çalışmalar
Teşekkürler Tunay Bey, inşallah hayal ettiğiniz atölyeye kavuşursunuz sizde.
@ inşaAllah gökmen bey teşekkür ederim iyi dilekleriniz için
so now i'm waiting to see a wood engine!!! you are the best
adam yine yapmış Ellerine sağlık on numara
You make more and more cool things. I’m usually happy to make a square cut on a 2x4. Amazing.
excelente trabajo el que haces gracias a tus videos me inicie en esto de la carpinteria y poco a poco he estado aprendiendo saludos desde sinaloa mexico
Abi yine her zamanki gibi döktürmüşsün. Ellerine sağlık
Mui bueno esta fenomenal amigo eso se valora por aca
Felicitaciones, excelente idea y muy bien explicado en imágenes. Saludos Eduardo.
Как всегда, увлекательно и очень полезно. Эххх, кто б мне еще сказал где в городе у нас подшипники продольного скольжения водятся, и направляйки к ним
No comments. Upper class.
👍👍👍☝👍
10 / 10
Congratulations! You are a genius! I have learned a lot from your videos.
เครื่องกลึงไ
Ellerine sağlık kardeşim.
İlgiyle takip ediyorum.
Şu beğenmeyen kardeşlerime birçif sözüm olacak :Öldürdüğünüz tavuğun mezarını gostersenizde bir fatiha okusak....derler bizim buralarda...
Teşekkürler Ali Bey, yorumlarınız moral veriyor.
@ Allah yolunu açık etsin kardeşim
Super!!! You are really one of the best handyman. All of your tools are made so genially. My respects. Well done
thank you for making these videos they have made a huge difference in my life
Yine Gökmen usta yine harika bir proje ellerine sağlık...
AND a compound!? My goodness. I've got to get started on that 4-in-1 tool of yours right away! There's no reason a fellow couldn't use the wood parts as patterns for a home metal melting foundry.
Awesome!! I hope a Gokmen ALTUNTAS version of a cross cut with miter gauge is made as a following project!!
masha Allah, everything in you are using is already made by you. This is so great and inspiring, good job kardeşim
Gökmen Hocam muhteşemsin. Ellerine emeğine sağlık.
Sabirsizlikla bekliyoruz. Tebrikler..
Amazing build. You are a real genius. I'm looking forward to part 2
tebrik ediyorum sizi super isler yapiyorsunuz devamini bekliyoruz
Жжёт😅😅ээ гщж❤😅❤
Fantastic. Have been following you a long time and built your drill press too. This miter saw build is really helpful. Thank you so much.
MaaşAllah abi. Əllərinə sağlıq. Azərbaycandan Türkiyəyə salamlar
Teşekkürler, Azerbaycan'a selamlar
Wow! Very clean job. Am sure this guy can even make a full size, working Steam Locomotive Train out of wood.
Felicidades excelente vídeo
Pero lo más importante es que tienes las herramientas necesarias para realizar los inventos que desees
Y gracias por compartir este invento con nosotros
Saludos cordiales amigo desde México
2 part gelsin lütfen.. Emeğine. Sağlık ustam.. Her zamanki gibi muhteşem bir proje oldu.. Teşekkürler..
Teşekkürler Muhammet Bey, video düzenlemelerini yarına yetiştirmeye çalışıyorum inşallah yarın gelecek ikinci bölüm.
@ustam sabırsızlıkla bekliyorum.. Allah kolaylık versin..
I love how your mini-vice is designed to be housed in your normal vice!
You are incredible. Very good job.
Congratulations! Excellent job & video too. Thank u 4sharing with us
Amazing work... 🤩
Genial!!! Que hermosa que es la carpinteria!!! un abrazo desde colombia
Yine çok başarılı bir iş, elinize sağlık 👏
That's a bloody fantastic job U made of that saw bro.. Respect to all u guys who build using mostly wood. It shows u know what ur doing so big up to the chippie in this video.. Salute from Ireland my bro.. Keep the great work coming on here.. Its inspiring a lotta ppl..
как всё классно изготовлено браво мастеру !!!!!
I Love this, ignore the haters lol,
When there are no more shops, the braindead will walk the Earth.
But engineers will rebuild a piece of it for themselves.
I love this build, is there any machine you can't DIY, I also love the fact you only use simple tools or machines and jigs you have made yourself, you are a truly ingenious man, I will be building this, but with a twist, I have an old mitre saw head whose mounting had broken, I kept the saw because I don't like to throw out something I could repair or repurpose, this is perfect for my needs, I will send you some pictures and details when it's done in case my modifications can help someone else
Gökmen bey elinize sağlık, oldukça güzel bir uygulama olmuş. Çalışmalarınızda başarılar.
Teşekkürler Zekeriya Bey
Bravo,magnifico......👏👏👏👏👏👏👏👏👏
Спасибо Вам! Вы уникальный МАСТЕР
You are so amazing Gökmen - keep us informed. Thx for sharing
ótimo trabalho meu amigo ficou muito bom parabéns
excelente trabalho muito bem trabalhando meu amigo meus parabéns.
Genial trabajo compañero. Saludos.
Hey Gökmen, da ist dir ja wieder mal ein Geniestreich gelungen. 😍😍😍
Ich bin hin und weg.
Beschäftige mich gerade mit der Dekupiersäge.
Wenn das erledigt ist. Kommt deine Zug und Kappsäge dran. (ich habe noch eine kleine Kappsäge im Keller)
Der savvas papasavva hat das Unterteil für eine einfache Kappsäge, 2016 gebaut. Es ist interessant, eure unterschiedliche Herangehensweise für sein eigenes Projekt zu nutzen.
Deine Zug und Kappsäge zeigt, (neben all den anderen Geräten die du entwickelt hast)-dass wenn man sich alleine auf die Funktionalität konzentriert, man viele Dinge selbst machen kann.
Great job! Perfect! Hello and respect from Russia!
Part 2 yi bekliyoruz
excelente video espero la segunda parte del video
Clever and much better than commercial one bravo from france
Nice content! I also love the other jigs you made with the other power tools. Brillant!
Elinize sağlık 👏 tam da aradığım bir dönüşüm tezgahı 👍
мужик ну ты дал.
ЖИРНЫЙ ЛАЙК
The details of this saw are numerous, precise and complex. It is not impossible to imitate them, but you need many specialized tools. Do not understand my words wrong. Your work is a summit in creativity. But this work is very difficult for your followers
Your a super genius sir
Can you make X axis and y axis table
мужик с золотыми руками, я уверен у него дома все из дерева и стиральная машина и холодильник,а сам он родственник папы карло)
😁
Стопудова😉
My goodness, are you talented! Thanks.
Aman Tanrım, yetenekli misin! Teşekkürler.
Amazing, every home made jig you used is a treat to see.
Wow , great idea , you are the best as always , can you link the linear bearings and the 20mm support?
Love your videos and Ideas; taken a lot of them over for myself. - And as I see the comments are wordwide. That's how it shoud be!!!
Самый бюджетный вариант. Спасибо за идею.
Ferramentas incríveis; exatamente a criatividade que eu gosto !!
Great job. I´m waiting for the second part.
Mükemmel bir çalışma olmuş
Sir Thank you very much for this, this helped me much and saved my money thank you again
Awesome project. I'm very impressed 👍
Valla hocam müthissin... videolarini izleyip izleyip gaza geliyorum sonra elime yüzüme bulastiriyorum :(
Teşekkür ediyorum. Kendinize güvenmekten vazgeçmeyin derim, kararlılık çok önemli bir faktör bu işte.