You miss the part of how to align the window when you're installing everything together, you jump from tight the window to tight the motor of the window 🤷🏽♂️
Im trying my absolute best to get the regulator back onto the window and good lord what an enigma it has been trying to put it on. I am fighting for my life to put this piece back on and thanos came with his reality stone and changed the dimensions of how it would fit back on. Thats my only explanation to how it wont even seem like it’ll fit
For anyone replacing just the window motor, dont take the backpanel off, just take the speaker out so you can reach through its empty hole with your other hand and hold the regulator drum (the white starshaped thing where the motor will engage) in place when installing the motor
This video was invaluable for me, currently trying to repair a broken window regulator on my 2007 Mazda 2 in the UK. I haven’t finished the repair yet but this has given me some confidence to carry on. I never would have located the hidden screws and release clips etc. without this help. Many thanks.
If you have 2006 with central locking and can't get the electrical connector plug off, there is a red tab on the connector that you have to pull out first to unlock it. Even after that it's still hard to yank so I put a flat blade screwdriver in the gap and twisted while pulling on the wires. If you took the power window motor off you need to twist the assembly until it falls into the 3 notches in the door card. I twisted stuff until it clicked into their locations so that the assembly was flat together, ie, no gaps - if it's not flat together the gear cover plate might pop off -, then I finger tighten the 3 screws and gave final twisting to make sure everything was located before final tightening.
Finished!! Thank you for the help. Way more difficult than I imagined... especially lining up the new motor gears together. Needed another person to help hold everything while trying to align and get screws in. Tip for anyone struggling, I used long nosed 90 degree plyers that fit perfectly in holes on the window side to make slight adjustments to move window up/down manual.
+StanceTV Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
1min 24 sec... cant get that speaker adapter off the tweeter either... seems to be skipped. did you cut it?? how'd it come off? 12:50 how did you get the window down after it was already up and disconnected??
Tips and issues in had with video... Take the moter off before taking off the wiring harness Packing tape works better. Takes two people to reinstall the motor. Tools I used Paper clip Philips head screw driver A a Cutco sandwich knife A pocket knife A ratched set with 10mm and 8 mm
What size are the bolts holding the regulator to the window itself? Lost them in the process and new hardware doesn't come with most regulator kits lol.
I've been looking everywhere for help and this didn't answer or help me..my window shifts not sure why I heard you say door guides when taking the window out but thata all what was said.. also you didn't show how u put the bar window back in u jumped to the panel back on.
Thought my motor was burnt out but when I took it to the mechanic and after they clean the window they where able to get window move. But it wouldn't go back up... so used this video to take it apart and figured out the window clutch thing... the part there selling that turns the rotary motion of the window into a linear motion that moves the window up and down was dirty so I cleaned and reinstalled it. I noticed right away that was the issue with situation. The Window moves easy with just hands up and down once reinstalled with out thr motor unlike before... I have same issue with passinager door as well planing on fixing it another day.
+Jimmy John Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
just watch! out, if that gear on the regulator pops out like mine did, it exploded. the springs went flying and the cables unraveled. it was a pain to put back together. it involved a half inch ratchet and extension. My wife held tension on one cable with the ratchet and I fished the other end of cable on to the pulley while placing a full load on the second spring yikes! This all obviously had to be done outside the vehicle .
Great video. I have a 2008 Mazda 3 and I have couple of issues 1. Both my front doors no longer lock using the keyfob 2. When I roll up my driver side front window, the glass for some reason comes out of the tracks and keeps tilting forward. I have to hold it down to come up properly within the tracks. Can you help to understand what could be the issue?
+Mohammed Mehdi Since there could be many reasons why you are experiencing these issues, we do recommend having a local, reputable mechanic diagnose the issue. Thanks for checking us out!
Hello, please help me. Mazda 3 BK 2008. I am not able to disconnect the wires from the side of the door latch. The connector is behind the panel, inside the door. How do I get to him?
BTW make sure the window is in the tracks within the door. Mine was not in the tracks cause i had pulled it all the way out of the door frame and i had to open the panel again to get it back on there. The window was jamming and not going all the way back up.
+shoosh Thanks for checking us out. The install of the new regulator is shown at 12 minutes and 40 seconds. Please let us know if you need any further assistance, thank you.
Yep, that was the hardest part by far. After mounting the carriage to the window, you have to get the 2 studs lined up to the panel, the regulator to line up with the cutout, the motor to mesh with the regulator… while it is hanging there and get the 3 self tapping screws in. I figured it out with another set of hands (my daughter) but it was tricky and completely skipped here in this video. A little disappointing considering how thorough the rest of the video was, most of it was pretty trivial.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You miss the part of how to align the window when you're installing everything together, you jump from tight the window to tight the motor of the window 🤷🏽♂️
Im trying my absolute best to get the regulator back onto the window and good lord what an enigma it has been trying to put it on. I am fighting for my life to put this piece back on and thanos came with his reality stone and changed the dimensions of how it would fit back on. Thats my only explanation to how it wont even seem like it’ll fit
To say the least im in vegas and its 110 out right now and im losing my mind ive been trying to solve this for hours now
For anyone replacing just the window motor, dont take the backpanel off, just take the speaker out so you can reach through its empty hole with your other hand and hold the regulator drum (the white starshaped thing where the motor will engage) in place when installing the motor
+peterkray Thanks for the feedback!
Extremely helpful video. I don’t think I could have done this repair job without it.
+@dougkeiter Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
This video was invaluable for me, currently trying to repair a broken window regulator on my 2007 Mazda 2 in the UK. I haven’t finished the repair yet but this has given me some confidence to carry on. I never would have located the hidden screws and release clips etc. without this help. Many thanks.
If you have 2006 with central locking and can't get the electrical connector plug off, there is a red tab on the connector that you have to pull out first to unlock it. Even after that it's still hard to yank so I put a flat blade screwdriver in the gap and twisted while pulling on the wires.
If you took the power window motor off you need to twist the assembly until it falls into the 3 notches in the door card. I twisted stuff until it clicked into their locations so that the assembly was flat together, ie, no gaps - if it's not flat together the gear cover plate might pop off -, then I finger tighten the 3 screws and gave final twisting to make sure everything was located before final tightening.
Im grateful you’re facing challenges as to dismantle the soor, because we get to see the possibilities that we may face ourselves.
Finished!! Thank you for the help. Way more difficult than I imagined... especially lining up the new motor gears together. Needed another person to help hold everything while trying to align and get screws in. Tip for anyone struggling, I used long nosed 90 degree plyers that fit perfectly in holes on the window side to make slight adjustments to move window up/down manual.
Shoutout to Todd for that gnarly assist- Thank you for this video!
Fantastic instructional video, every step covered properly, couldn't have completed my faulty window repair without this 10/10!
It appears a step has been left out about aligning the regulator bolts with the door panel.
Do you have some suggestions or a video? I'm struggling with the aligning
Officially love this channel. Always helpful if I happen to come across an issue.
+StanceTV Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Very thorough and helpful. I got the regulator going t install it today. I’ll have my IPAD with me!
You guys are golden for posting this, thank you
How do you sit the window? My window is doesn’t go up right. It’s out align or something
1min 24 sec... cant get that speaker adapter off the tweeter either... seems to be skipped. did you cut it?? how'd it come off? 12:50 how did you get the window down after it was already up and disconnected??
Hi how do you get the wire in the realtors back in
Tips and issues in had with video...
Take the moter off before taking off the wiring harness
Packing tape works better.
Takes two people to reinstall the motor.
Tools I used
Paper clip
Philips head screw driver
A a Cutco sandwich knife
A pocket knife
A ratched set with 10mm and 8 mm
hey appears a step has been left out about aligning the regulator bolts with the door panel one most important step????????!
What size are the bolts holding the regulator to the window itself? Lost them in the process and new hardware doesn't come with most regulator kits lol.
Lol glad to see i'm not the only one that figths those connections
Thank you! Great Job!
Video help me a lot,ir would be good you shiped parts to Honduras..thank you for the video,help a lot.
+Dumbledore Ring Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
I've been looking everywhere for help and this didn't answer or help me..my window shifts not sure why I heard you say door guides when taking the window out but thata all what was said.. also you didn't show how u put the bar window back in u jumped to the panel back on.
does the regulator just sit in the bottom of the door? is it bolted to the door?
i would have liked to see the window tested...
Can you do a video on how to fix the sunroof of a PT Cruiser
Hi Sue..what if the glass window fell down, how do you fix it?
Thought my motor was burnt out but when I took it to the mechanic and after they clean the window they where able to get window move. But it wouldn't go back up... so used this video to take it apart and figured out the window clutch thing... the part there selling that turns the rotary motion of the window into a linear motion that moves the window up and down was dirty so I cleaned and reinstalled it. I noticed right away that was the issue with situation. The Window moves easy with just hands up and down once reinstalled with out thr motor unlike before... I have same issue with passinager door as well planing on fixing it another day.
+Jimmy John Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
just watch! out, if that gear on the regulator pops out like mine did, it exploded. the springs went flying and the cables unraveled. it was a pain to put back together. it involved a half inch ratchet and extension. My wife held tension on one cable with the ratchet and I fished the other end of cable on to the pulley while placing a full load on the second spring yikes! This all obviously had to be done outside the vehicle .
Yep, happened to me and had to buy a new one LOL
The same part, but for an 06 Mazda 3 on you website has the hub that connects to the motor facing the opposite direction of this one. Why is that?
Great video. I have a 2008 Mazda 3 and I have couple of issues
1. Both my front doors no longer lock using the keyfob
2. When I roll up my driver side front window, the glass for some reason comes out of the tracks and keeps tilting forward. I have to hold it down to come up properly within the tracks.
Can you help to understand what could be the issue?
+Mohammed Mehdi Since there could be many reasons why you are experiencing these issues, we do recommend having a local, reputable mechanic diagnose the issue. Thanks for checking us out!
My glass tips forward. What do i need to do
How much does it cost to replace a Mazda 2008 locking mechanism?
Hello, please help me. Mazda 3 BK 2008. I am not able to disconnect the wires from the side of the door latch. The connector is behind the panel, inside the door. How do I get to him?
Great video! Thank You!
BTW make sure the window is in the tracks within the door. Mine was not in the tracks cause i had pulled it all the way out of the door frame and i had to open the panel again to get it back on there. The window was jamming and not going all the way back up.
Thanks for checking us out. 1aauto.com +Donny
thank very much
Could I use this video to do the same thing on my Mazda 3 2007 mk1? Please somebody let me know thanks.
Yes you can, it’s the same
window is going up incorrectly i have to push one end down when its about an inch from the top. Do you have a video on how to fix this?
+グレープフルーツ We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
Shout out Todd
There just cut out the important part 😅
You totally just skipped the most difficult part how you put on the window regulator 🤦♂️
I was going to write the same thing.
+shoosh Thanks for checking us out. The install of the new regulator is shown at 12 minutes and 40 seconds. Please let us know if you need any further assistance, thank you.
@@1AAuto 12:40 is removal. We are talking about the big jump between 16:53 and 16:54.
Yep, that was the hardest part by far. After mounting the carriage to the window, you have to get the 2 studs lined up to the panel, the regulator to line up with the cutout, the motor to mesh with the regulator… while it is hanging there and get the 3 self tapping screws in. I figured it out with another set of hands (my daughter) but it was tricky and completely skipped here in this video. A little disappointing considering how thorough the rest of the video was, most of it was pretty trivial.
That drivers side seems like a bear...
in real life, all broken xD
Nope!