#palletbuild #pallethouse #palletbarn Instagram: / normalguydoesitall The first step is to cover the interior walls. Used music: Mokka - Inspiring Epic Orchestra No Copyright Music-
I think this is a great overall build. The only thing I would have done differently would have been to add insulation before the outer boards were put on. I’d also suggest some 4-5 inch heavy rubber weatherstripping at the bottom of the doors to help keep the chill off. Nice job though! 🍺🍺🍺
Thank you! Since it was planned as a cold barn, so no insulation was needed. Rubber strips are also planned to be placed under the door ;) Thank you for watching!
Whot a great job , well done mate , iv,e really enjoyed watching you work ,you made it look so easy ,but I know it was not , fantastic mate from Michael Patrick.
I enjoyed watching your videos. I like the skylight the most as it gives you great lighting without needing power. I’m from the USA and kinda laughed a bit when you were pulling the trailer in the mud. My huge 2014 Ram 1500 would have made that light work.The cost of fuel is high for it but I just use it when it is needed. I would have put up a vapor barrier before I put on the exterior siding to insure that the wind couldn’t come in as the wood shrinks over time. That said, I really like the job you’ve done and wish I could do the same but local regulations won’t allow me. Anything larger than a 8’x10’ building needs inspected and be built to code.
Hey, Thank you! I'm very happy with my Subaru and it's a very capable four-wheeler, can do better in some places than large SUVs. but then there were bad tires under the car. By the way, this building has a building permit and it is also in the building register. Size 5.2m x 7.2m. Thank you for watching!
@@normalguydoesitall wow! It goes to show how differently things are done from place to place. There is no way that we could use pallets for construction here unless it is on a farm and doesn’t need to be inspected. I’ve owned a small suv in the past and loved it too but the pulling abilities of a large heavy machine are easily understood. Now if you want to laugh at me for something… my wife’s daily driver is a 2012 Cadillac Escalade ESV with the 6.2l engine. Fuel loving ego machine for sure. My preferred vehicle is my motorcycle. The good news for environmentalist is that we work from home and don’t put many miles on these vehicles. I would have liked to see the process of laying the floor you built. It really looked nice. How did you secure the walls to the ground? I couldn’t quite tell.
@@jasonlee5317 Hey, since we live in the country, we also have simpler laws, we could not build such a building in the city of course. I'm not trying to laugh at anything, I just bought a larger SUV to haul a horse trailer it is Jeep Grand Cherokee Overland Limited 3.0 D (you can laugh now). I am also a motorcycle type man i try to ride as much as possible in the summer. The laying of the floor was not filmed unfortunately yes. Walls to the floor- Impregnated beams are on concrete, and the beams are anchored to the concrete with concrete anchor , and the pallets are screwed to the beams on the concrete. I hope this helped. Thank you!
Just got to tell you , I build a complete garage out of pallets, Roof and all, All I bought was 2x4 s 12 feet , On the Roof ,I even cut the pitch angle and slid both sides up to the rig board, kept all pallets in row so it looked like 2x4 s, Once plywood was on looked just like it should , saved be a hole lot of money. plywood was biggest cost, good luck on your build
Hi, yes, we have osb plates with straight edges and grooves in Estonia, the groove osb is good for on floors, walls and roofs as the plate connection remains smooth ;) Thank you!
Nice design and nice finsh. Looks like you bought all new pallets, I imagine it makes it easier to construct but is it a more financially viable option? Seems like a lot of wood 'wasted' by being hidden behind OSB, would it not have been cheaper to build it with timber?
Thank you! i got these pallets for free, I bought them for the garage, but I got them very cheaply. but it's still so very cheap to build and I saved a lot of money. Thank you!
My OCD hit the roof when your three racks weren't level. Thanks for the great videos. Any reason you didn't use a waterproofing membrane under the siding?
Hey LOL. Thank you! your three racks weren't level? I used waterproofing membrane on the foundation, on top of which went the impregnated beam and the pallets went on the beam. Thank you!
Hola ¡Me podrías decir como se llaman esas placas...como debo pedirla en el negocio? Fue tan inspirador tu video?.........que quiero colocar así mi taller.... GRACIAS Bs As Argentina.- mi like y si hay mas inspiraciones me suscribo...SALUDOS DESDE Bs As ( Buenos aires Argentina)
Thank you! this wooden board is OSB, wood chipboard tile, at least we called it that way and it can be different thickness 8-22mm /¡Gracias! esta tabla de madera es OSB, baldosas de aglomerado de madera, al menos lo llamamos así y puede tener diferentes espesores de 8-22 mm
@@normalguydoesitall Ahhh. Ok I see. Wonderful build. I watched the entire series lol I'm building a tiny house/ Man cave in the back of my Property out of Pallets and this REALLY helped me out.
Говорят, что баранина, это для лошадей, в утеплении не нуждаются, спасибо. / It is said that the barn, it is for horses, no need for insulation, thank you. sorry google translate.
Hey, in fact, I saved thousands of euros compared to building a barn with a wooden frame, and there would have been more work with the wooden frame ;) All the best to you!
Hey, In fact, I saved a lot of money on this construction. No double work by the way. And if there had been double work, I have nothing against work ;) Thank you!
@@normalguydoesitall Loved watching your build series! We built a woodshop building/garage with leftover lumber and siding from our housebuild. We had a window from salvage. On the side we built at covered porch using old fence boards for the wall and painted white, looks like shiplap! Then made a railing out of the fence boards to trim the porch. The only things we had to buy were the paint, a metal garage door, roofing materials, and some electrical materials for lighting. It's our favorite place to be as we made a campground next to it with a firepit, a pool and camper. We love that we did it ourselves.
The idea is good, but I don't always think that far when I start building something, when I started this construction I had no idea what kind of interior walls I would make :))) Thank you!
That's a really nice-looking barn. We're building several sheds out of pallets and reclaimed wood. Just finished the roof on our second building but it still needs a floor, some siding, and maybe some trim to make it look nice.
Si, se ha solucionado, también hay videos de la construcción de la carretera. Muchas gracias! Yes, it has been solved, there are also videos of the road construction. Thank you!
хороший шпон мне бы такой бы не помешал бы тоже заменить внутреннию дверь комнаты а то та филенчитая уже вся в негодность превратилась сколько стоит такой лист подскажи
Dang, that was quick. Wish I could work that fast but you’re a better carpenter than I am. That’s why I always preferred working with metal. You can hide a lot of sins with a welding rod and a rattle can.
Hey, the internal dimensions are 5.2m x 7.2m A lot of material has been obtained for free but still the total cost is now 1800-2000€ and even more. But thank you and all the best to you!
great video. that Subaru was impressive through the mud with the trailer
Thank you! I have a video of Subaru on a sandy off-road track, go watch it on my channel please ;) Thanks!
I think this is a great overall build. The only thing I would have done differently would have been to add insulation before the outer boards were put on. I’d also suggest some 4-5 inch heavy rubber weatherstripping at the bottom of the doors to help keep the chill off. Nice job though! 🍺🍺🍺
Thank you! Since it was planned as a cold barn, so no insulation was needed. Rubber strips are also planned to be placed under the door ;) Thank you for watching!
Now, nobody would ever know it was made from pallets. Wonderful, beautiful job there.
Thank you!
So far I have watched all the barn videos. Great job.
Thank you!
Amazing job, congrats,
Thank you!
This building is really coming along nicely!
Thanks! yes it does, soon boxes and then it's ready. ;)
Whot a great job , well done mate , iv,e really enjoyed watching you work ,you made it look so easy ,but I know it was not , fantastic mate from Michael Patrick.
Thank you and all the best to you!
Even the horse is looking at the Subaru spinning its wheels and going - "come on man, there a better way." LoL
LOL. yes I know, but now the subaru has better tires and it doesn't happen anymore. Thank you!
I enjoyed watching your videos. I like the skylight the most as it gives you great lighting without needing power. I’m from the USA and kinda laughed a bit when you were pulling the trailer in the mud. My huge 2014 Ram 1500 would have made that light work.The cost of fuel is high for it but I just use it when it is needed. I would have put up a vapor barrier before I put on the exterior siding to insure that the wind couldn’t come in as the wood shrinks over time. That said, I really like the job you’ve done and wish I could do the same but local regulations won’t allow me. Anything larger than a 8’x10’ building needs inspected and be built to code.
Hey, Thank you! I'm very happy with my Subaru and it's a very capable four-wheeler, can do better in some places than large SUVs. but then there were bad tires under the car. By the way, this building has a building permit and it is also in the building register. Size 5.2m x 7.2m. Thank you for watching!
@@normalguydoesitall wow! It goes to show how differently things are done from place to place. There is no way that we could use pallets for construction here unless it is on a farm and doesn’t need to be inspected. I’ve owned a small suv in the past and loved it too but the pulling abilities of a large heavy machine are easily understood. Now if you want to laugh at me for something… my wife’s daily driver is a 2012 Cadillac Escalade ESV with the 6.2l engine. Fuel loving ego machine for sure. My preferred vehicle is my motorcycle. The good news for environmentalist is that we work from home and don’t put many miles on these vehicles. I would have liked to see the process of laying the floor you built. It really looked nice. How did you secure the walls to the ground? I couldn’t quite tell.
@@jasonlee5317 Hey, since we live in the country, we also have simpler laws, we could not build such a building in the city of course. I'm not trying to laugh at anything, I just bought a larger SUV to haul a horse trailer it is Jeep Grand Cherokee Overland Limited 3.0 D (you can laugh now). I am also a motorcycle type man i try to ride as much as possible in the summer. The laying of the floor was not filmed unfortunately yes. Walls to the floor- Impregnated beams are on concrete, and the beams are anchored to the concrete with concrete anchor , and the pallets are screwed to the beams on the concrete. I hope this helped. Thank you!
Great job! Just the pallets walls look great as well!
Thank you again! yes they do ;)
Just got to tell you , I build a complete garage out of pallets, Roof and all, All I bought was 2x4 s 12 feet , On the Roof ,I even cut the pitch angle and slid both sides up to the rig board,
kept all pallets in row so it looked like 2x4 s, Once plywood was on looked just like it should , saved be a hole lot of money. plywood was biggest cost, good luck on your build
Thank you! Nice to hear that someone else uses pallets like this as a building material, All the best to you!
Amazing work, congratulations
Thank you i am grateful!
Молодец, форик как всегда рулит.
Спасибо!
Tongue and groove osb??!!! How have I never seen this before.
Hi, yes, we have osb plates with straight edges and grooves in Estonia, the groove osb is good for on floors, walls and roofs as the plate connection remains smooth ;) Thank you!
If you attach the sharpie to a lanyard, you'll never lose it, or waste time looking for it.
Thank you!
Things built like a TANK! By tank I mean well made 🙂
Thanks, i guess!
Looking good.
Thank you!
Majstore! 👍
Thank you!
Здорово! Молодец!
Большое спасибо!
Nice design and nice finsh. Looks like you bought all new pallets, I imagine it makes it easier to construct but is it a more financially viable option? Seems like a lot of wood 'wasted' by being hidden behind OSB, would it not have been cheaper to build it with timber?
Thank you! i got these pallets for free, I bought them for the garage, but I got them very cheaply. but it's still so very cheap to build and I saved a lot of money. Thank you!
My OCD hit the roof when your three racks weren't level. Thanks for the great videos.
Any reason you didn't use a waterproofing membrane under the siding?
Hey LOL. Thank you!
your three racks weren't level?
I used waterproofing membrane on the foundation, on top of which went the impregnated beam and the pallets went on the beam.
Thank you!
Gracias
Thank you!
Hola ¡Me podrías decir como se llaman esas placas...como debo pedirla en el negocio? Fue tan inspirador tu video?.........que quiero colocar así mi taller.... GRACIAS Bs As Argentina.- mi like y si hay mas inspiraciones me suscribo...SALUDOS DESDE Bs As ( Buenos aires Argentina)
Thank you! this wooden board is OSB, wood chipboard tile, at least we called it that way and it can be different thickness 8-22mm /¡Gracias! esta tabla de madera es OSB, baldosas de aglomerado de madera, al menos lo llamamos así y puede tener diferentes espesores de 8-22 mm
Meanwhile,back at the ranch.lol
OK thanks!
Nie potrzebuje takiej "pomocy" hehe
ok .
I enjoyed watching you make the pallets disappear. Excellent use of time-lapse. May spring be as warm as you wish and as wet as you need.
Thank you very much, i enjoyed it myself too. Spring is already warmer and not so wet anymore, thanks a lot ;)
did you lay a concrete slab first and then the floor stones or is just floor stones right into the dirt?
OK, I laid the stones on the prepared gravel.
The Best.🪵👍😉
Thank you!
👍👍👍
Thank you!
Now I know why there was a plywood shortage last year....
LOL. good one ;) in fact, we still have plywood shortage in Estonia and Europe.
No insulation...?
Hey, No there is no insulation, it is not necessary as it is a cold barn and only needs to be windproof ;)
u could have packed straw in those pallets b4 covering.great job though
thank you!
why no insulation?
Hey, because this barn is not heated it is a cold barn for horses, Thank you!
@@normalguydoesitall Ahhh. Ok I see. Wonderful build. I watched the entire series lol I'm building a tiny house/ Man cave in the back of my Property out of Pallets and this REALLY helped me out.
Это для кого постройка или для чего? Утепления стен нет, думаю либо гараж либо для крс
Говорят, что баранина, это для лошадей, в утеплении не нуждаются, спасибо. / It is said that the barn, it is for horses, no need for insulation, thank you. sorry google translate.
@@normalguydoesitall Благодарю за ответ. На основе вашей стройки пересмотрела свои планы. Здорово придумали!!!
@@ВремяПеремен-р1щ Приятно слышать, спасибо!
Il faut demander la permission pour construire une grange ?
oui ça doit. le permis de construire doit être.
хорошо помыл свою лайбу крутую я так птицьи клетки мыл после срача курей можешь меня в свои мойщики возьмешь
ok!
Barely saved any money that way and created a shit ton of work
Hey, in fact, I saved thousands of euros compared to building a barn with a wooden frame, and there would have been more work with the wooden frame ;) All the best to you!
There is no money to save whit this buildning Only dubbel work
Hey, In fact, I saved a lot of money on this construction. No double work by the way. And if there had been double work, I have nothing against work ;) Thank you!
@@normalguydoesitall Loved watching your build series! We built a woodshop building/garage with leftover lumber and siding from our housebuild. We had a window from salvage. On the side we built at covered porch using old fence boards for the wall and painted white, looks like shiplap! Then made a railing out of the fence boards to trim the porch. The only things we had to buy were the paint, a metal garage door, roofing materials, and some electrical materials for lighting. It's our favorite place to be as we made a campground next to it with a firepit, a pool and camper. We love that we did it ourselves.
Enjoyed the build --
but
BUY AMERICAN FOR PROFITS IN AMERICA
Thank you!
Just a thought.
Make the next build, to match sheet sizes, save all that cutting.
😮
🎉🎉🎉🎉🎉
The idea is good, but I don't always think that far when I start building something, when I started this construction I had no idea what kind of interior walls I would make :)))
Thank you!
Excelente trabajoo!!! Por favor el techo cómo lo construyeron??
Thank you! there is a roof construction video, pallet barn build part 2. Thank you!
That's a really nice-looking barn. We're building several sheds out of pallets and reclaimed wood. Just finished the roof on our second building but it still needs a floor, some siding, and maybe some trim to make it look nice.
Thank you! it's good to hear that, all the best to you ;)
Antes deberías solucionar el problema de acceso que tienes fuera.
Si, se ha solucionado, también hay videos de la construcción de la carretera. Muchas gracias!
Yes, it has been solved, there are also videos of the road construction. Thank you!
I just built some shed door with pallets and that was hard. Absolutely incredible work great looking barn.
Thanks, yes building from pallets is not actually really easy. I hope you did well ;) Thanks again and yes the barn is very cool!
@@normalguydoesitall 0bonito
Good luck with those osb prices!
Thanks! luckily i bought my osb boards while the prices were still normal, now the prices are double.
хороший шпон мне бы такой бы не помешал бы тоже заменить внутреннию дверь комнаты а то та филенчитая уже вся в негодность превратилась сколько стоит такой лист подскажи
ok!
Dang, that was quick. Wish I could work that fast but you’re a better carpenter than I am. That’s why I always preferred working with metal. You can hide a lot of sins with a welding rod and a rattle can.
What can i say than a big thank you! I also like working with metal and especially welding ;) Thank you!
Just curious, why no insolation, or you haven't put furring strips to close off seams to keep the air out as much as possible, but overall great build
No need for insulation, because it is a cold barnb, the idea is for the animals to be in a dry and windproof place if needed. Thank you!
My OCD kicked in when you didn’t use a level to ensure the horseshoes were level😂😂😂😂🇦🇺🇦🇺🇦🇺
LOL, horseshoes screw holes are level, horseshoes can't be in one level really because everyone is different ;) Thank you!
@@normalguydoesitall There is no art in symmetry; hang the harness wherever you will!
i learned wen using o.s.b no mater the application exterior or interior seal it from the weather. moister
Hey, yes it is so, osb does not tolerate moisture! Thank you!
Nice working please use a working bench
Thank you! I will in future ;)
What an awesome design
Thank you!
What's the size and estimated cost? That's cool!
Hey, the internal dimensions are 5.2m x 7.2m A lot of material has been obtained for free but still the total cost is now 1800-2000€ and even more. But thank you and all the best to you!
@@normalguydoesitallhow many dollars is that? It seems cheap for $2000!
@@TheRainHarvester Hey, about 2500-300$
i got so cheap to build because a lot of the materials i got for free. thank you!