Watch Battery Replacement: Change a watch battery WITHOUT TOOLS EASILY

I would really appreciate a Super Thanks if you feel the need, thank you!
Get a replacement watch battery from Amazon here
amzn.to/2EsRfLc
Make sure it is the correct model number sr626 is most common
Quick and easy method to change a watch battery with a flat screwdriver, as not everyone has access to horologist tools. This will work for most wristwatches, seiko , casio, g shock etc automatic watches may have a screw down case which cannot be opened as easy

[@powerfulrisewithlogan7049]

the whole bending the back to the ground help me a lot i almost throw away this watch i got lol

[@c_farther5208]

I saw the little indent and lined it up with the stem, I didn't know to do that until you taught me. Thank you for your time and education on this. I still cannot get the back on my Armitron but I will keep trying until I throw it in the trash. Thanks again, my friend.

[@joemccarron1534]

Thank you!!! I spent the whole morning trying to get the back to stay on the watch front, tried what you said to bend it a bit and it worked!!! You're a lifesaver!!! :D

[@gunnerboy2008]

I was trying and trying for so long and after I saw the video, I done it in less than 5 minutes! Thanks Great Video! :D

[@dannyjones3840]

Thank you for the bending tip, I've been fighting this damn thing forever!

[@GeekznBeatztv]

No problem my friend Glad it helped!

[@rachaelhanna975]

Thanks heaps . That "bend it" tip at the end was just what I needed to know

[@MzCoCo561]

Thank you so much I had that same tool at home. The jewelers were charging $60 to change out the battery which only cost me $5.00.

[@RogerThat1945]

Use a `Cloff`?? Is that with two `F`s` or three?

[@pedrolobo6828]

xD i had to sign in just to like this comment!!!

[@artfte]

ThankYou I never knew they just popped in I've spent years pushing them up and in ,never easy.

[@elder5391]

Thanks man!
Hugs from Brazil!

[@rammyx121]

clever fella...bend the back plate!! i'd never have thought of it. cheers!!

[@lildice830]

Thanks carnal for this vid it really helpd me wit the watch my wife got me

[@Gr8rThenU]

Thanks man! it worked like a charm.

[@MrTrendi69]

I just literally broke a gold watch cause I was tryna rush but nice video 👍👍👍

[@illbebad]

didn't know there was a tiny lip to pry under, thanks for that info!

[@aboutalia]

Thank you man.. I'm saving my money now. :D

[@AlexTrubitsyn]

Thanks-- this was helpful!

[@Jazziegirltoo]

Thanks! Good tips. Not going to work for everyone, but no need for people to be so rude--just because they can. Just ignore. The world is full of it!

[@chrisjpartridge]

Top job - Thanks

[@bradwilliams6767]

Well there goes the water resistance in that watch. :/ Do this to your cheap watch. But NEVER do this to a decent watch. Pay the few dollars it costs for a pro to do it.

[@MSuss98]

How do I put the back back on!!!

[@droma51090]

how do you know if the back case it threaded or not? and will this ruin the waterproofness?

[@tomjgoodwin]

It was a screw on back. He ruined that watch.

[@MrJrboss1]

What's the battery size ?? Is it 13 or the replacement number

[@TheBeautyCosmetic]

thank u so much!!!

[@DobermansRock]

Good call....

[@Itzmeh_bent0]

try a butter knife with a dull surface and a cloth to hold watch for support in griping it will help for slipping on the watch on hand :)
\

[@Dtyler171]

It probably should be mentioned that if you are doing this work yourself, you cannot assume the watch will still be water resistant.

[@ZylgisZaldapheus]

This technique did not work w/my Seiko. I even used a razor scraper & applied around 70 pds of pressure to open it up to no avail. I've come to the conclusion that mine has a screw down case since it has notches in it every 1/2 inch or so. Thanks for explaining to us how to determine this Einstein. That might have made a better introduction in your video.

[@OkStatePokes1]

I know, I know...blaming someone else for your own stupidity is so much easier, right? How about you pull your head out of your ass and check what type of watch case you have before attempting to change the battery...

[@AliScobbie]

cheers dude

[@elcar5468]

I do believe a screwdriver counts as a tool

[@Saavvvv]

haha! great video for people stupid enough to think a screw down back will just pop off!!

[@Rich-hy2ey]

Cheap watches have lips. Sealed watches, good to whatever atmospheric pressure of water sealing DO NOT and are SCREWED down.

[@tomjgoodwin]

The funny thing is if you notice the notches it was a screw on back he just decided to pop it off

[@MrMccoy1996]

There is an easier way... Buy an automatic! ;)
It seems that you can find a good automatic nowadays for relatively close to the same price as a quartz watch.

[@EternallySexy]

I know right?

[@Itzmeh_bent0]

becareful putting it in water,it is not resealed once you popped the back piece open

[@juliusbaltazar609]

lmao! I bet its not water resistant anymore. This IS a screw backing. all you need is a needle nose pliers and watch out for the O ring when screwing the back on.

[@Rurne]

British engineering at its finest.

[@woodbine66]

Rolex is British??? And there was me thinking they were Swiss.

[@bare5747]

It says how to change watch batter WITHOUT TOOLS EASILY.. WRONG, he used a tool, a screwdriver.

[@shafeekhan5266]

breil

[@DobermansRock]

Won't work on Seiko.

[@osctelum]

u shourent use any sort of metal wen taiking out the battery .cus u may caus a short surcait or something.

[@richardllperkins]

Hello. This gentleman just ruined the case back. The case back is clearly a screw-down case back and needs an entirely different tool!

[@SherryYiFang]

can you narrate my life please

[@floppy12k]

sherryo3o lol

[@YouLoveMeMwah]

I CANT OPEN IT WITH NOTHING -_--

[@stylecouncilor1]

For what its worth, a screwdriver is a tool

[@watchandjewelryloft4713]

DO NOT FOLLOW THIS VIDEO!! Bending a case back? REALLY?

[@billcavazos2817]

Don't do this

[@HighlanderGeoff]

You have no credibility so long as you do not pronounce "th"