Do you know this Antique Punch? - Restoration | Workshop DC

#WorkshopDC #Restoration #Tool #ASMR
Do you know this Antique Punch? - Restoration
Hi, how are you doing?
In this video i show how to restore a Antique Punch.
This tool was used to make holes in paper in the past, unfortunately i couldn't find any information about the brand.
The Punch probably have 50+ years old.
To start the restoration i begin disassemble all parts with a hand drill and a plier, this step was not very hard but there was some parts stuckeds.
With the disassemble done i had to clean all with degreaser to make it more easer to do electrolysis.
If you want to know how to make electrolysis just take a look in this video - • How to make Electrolys...
I leave the parts on electrolysis for 12 hours, all the old paint and the rust leave the surface, i just washed all with hot water and a hand wire brush.
After this process i wheel brushed the parts in a benshgrinder to remove some remain of rust.
With all parts brushed i had to remake the nickel plate, first i washed the parts on a bath with water and hydrochloric acid.
I leave the parts on the bath for a few minutes, after that i put the pieces on the nickel solution one by one.
With all pars plated i started to polish them.
Now is time to paint, i make a base with 2 coats of primer and 2 coats of navy blue on the below part and 2 coats of sky blue on above piece.
And all done to assemble.
To the assemble i just used a Plier and a hammer, it was not that hard to assemble.
And the restoration is done, perfect restoretion.
I also make a test time to see this tool working.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Primer;
- Penetrating Oil;
- Spray Sky Blue;
- Spray Navy Blue;
Equipmentis used:
- BenchGrinder;
- Hand Drill;
- Plier;
- Hammer;
And if notice some english mistake please tell me in the comments, english is not my main language, i'm brazillian.
Thank you so mush for Watching.
With love, DC.
My Instagram - / workshopdcof
My Facebook - / workshopdcof

[@WorkshopDC]

Thanks for watching! Please don't forget to Subscribe! With Love, DC! ❤️

[@nathanielharper944]

@Melvin Jackson Yea, been watching on kaldrostream for months myself :D

[@razorboyXVII]

Great restore!

[@WorkshopDC]

Thanks! ❤️

[@misterpatina]

I love the final result! Great job bro!

[@WorkshopDC]

Thanks Bro! ❤️🥰

[@yeagerxp]

Excellent work👍👍👍 . Thanks for sharing

[@WorkshopDC]

Thanks Yeagerxp! ❤️

[@konumrestoration4477]

perfect job again.

[@WorkshopDC]

Thanks! ❤️

[@RESTORATIONOFSCRAPMETAL]

interesting project, Great job buddy Like 👍

[@WorkshopDC]

Thanks! ❤️

[@vinceianni4026]

Beautiful restoration Mister well done my friend

[@WorkshopDC]

Thanks Vince! ❤️

[@BrothersRestorationIndustry]

Good job👍🌹

[@WorkshopDC]

Thanks! ❤️

[@bricoda]

skillful work

[@WorkshopDC]

Thanks bricoda! ❤️

[@uzoboy]

Good job. You need to oil the parts after electrolysis for prevent flash rust. You see rust is keep coming back. Oiling the parts will stop it. Love the colors, well done

[@WorkshopDC]

Thanks! ❤️

[@jcslima14]

Great restoration! Good job, mate.

[@WorkshopDC]

Thanks Júlio! ❤️

[@oneshotme]

Great work restoring it!! It looks great!!!!
Enjoyed your video and I gave it a Thumbs Up

[@WorkshopDC]

Thanks Oneshot! ❤️

[@oneshotme]

@@WorkshopDC You're welcome

[@snnproject6164]

Very good congratulations 👍

[@WorkshopDC]

Thanks SNN! ❤️

[@antonioparra4979]

mil gracias por el video señor !!!!!! muy buen trabajo, la electrolisis es muy recomendada no se porque algunos no la usan será cuestión de estilos pienso yo.

[@justinwilsoncustoms6520]

Brill!!

[@WorkshopDC]

😄😄
Thanks! ❤️

[@thisisrestoration1983]

Cool video bro! Greetings from german restoration:-)

[@WorkshopDC]

Thanks Bro! ❤️

[@metalhead4996]

I like the 2 tone colors.

[@RestorationAustralia]

Very cool well done.

[@WorkshopDC]

Thanks! ❤️

[@ricardoallgayer620]

Miito bom este trabalho. Parabéns. Neste furador havia uma borracha embaixo, para recolher os papeis cortados. Trabalhei muito com um desses.

[@WorkshopDC]

Obrigado Ricardo! ❤️
Infelizmente eu não consigui encontrar a base, mas funciona mui bem

[@customrestoration5317]

love this little gripper ❤ 7:25 and electrolysis is satysfying, great work buddy 😊👍

[@WorkshopDC]

Thanks! ❤️

[@-Deena.]

Nice work 🧡

[@WorkshopDC]

Thanks Deena! ❤️

[@randomrestoration6858]

Very nice job, man! I love that shade of dark blue paint on the base! Just think of how much more efficient you're going to be on all those occasions you need to punch two holes at once haha. Keep up the great work ❤

[@WorkshopDC]

Sometimes you just need strength, you know? 😆😆😆
Thanks Bro! ❤️

[@19Bmiller]

I have I used in the office years ago. It punched the holes in the top and I had a clip board with rings to hold the sheets

[@WorkshopDC]

Yep! Thanks for comment Bob! ❤️

[@feisdee1]

Nice!

[@WorkshopDC]

Thanks Feisdee! ❤️

[@patriciapimenta5084]

ficou maravilhoso parabens

[@HanyMoh2017yt]

I like it 👍👍

[@WorkshopDC]

Thanks! ❤️

[@wellingtonrdm]

Show 😱🤜🤛

[@WorkshopDC]

Obrigado Wellington! ❤️

[@wellingtonrdm]

@@WorkshopDC combinação de cores ficou incrível.

[@WorkshopDC]

Sim, eram as cores originais da peça.

[@brentsanders547]

Great work.was wondering what dose your degreaser have in it. Haven't seen this kind in north Carolina usa.

[@WorkshopDC]

I don't know either, but It smells very chemical. I cant breath without using mask when I work with this product. I'm from Brazil.
Thanks Brent! ❤️

[@rickpidcock.writer]

hurrah

[@sergeybykov4502]

Это блеать не резак! Это дырокол,!!!