How To Regrind Yanmar Diesel Tractor Rocker Arms

Check out this HACK to regrind diesel tractor engine valve rocker arms. This trick works great to resurface your Yanmar valve rocker arm faces without any special tools. If you're having trouble properly setting your Yanmar or John Deere tractor's valve clearances this will help. TOOLS ↓↓↓↓
➤ Abandoned Yanmar Tractor WILL IT START? Part 1?: • Abandoned Yanmar Tract...
➤ Service Manual (Yanmar Engines): bit.ly/3Lk7gVP
➤ ALL Yanmar Manuals!!!: bit.ly/3TexzyH
➤ Valve Clearances: .006"
Tools:
● Drill Press 12": amzn.to/3IX35vo
● Drill Press 8": amzn.to/3slzyG6
● Drill Press Vice: amzn.to/3HauQ1P
● Sanding Drums: amzn.to/3sjlQmV
● Grinding Stone: amzn.to/3siAMSn
● Straight Feeler Gauges: amzn.to/3nGUaUW
● Bent Feeler Gauges: amzn.to/32ud1f5
Should work on these Yanmar models:
● Yanmar YM1500
● Yanmar YM1700
● Yanmar YM2000
● Yanmar YM240
● Yanmar YM2210
● Yanmar YM2310
● Yanmar YM2610
Should work on these John Deere models:
● John Deere 850
● John Deere 950
● John Deere 1050
Should work on these Tractor Engines:
● 2T
● 2TR20
● 2TR20-A
● 2TR20-AX
● 3T
As an Amazon Associate I earn from qualifying purchases.
This is a Yanmar YM2000B with a 2TR20-A engine.

[@jimbop101]

AND, there's my Christmas present.. Thanks Matt and Merry Christmas to You and Yours

[@MattsShop]

You're welcome. Merry Christmas 🎅

[@AmsterdamCesar]

Cannot wait to se the full result!! 🚜
Greetz from France 🥐🍷

[@MattsShop]

Greatings from the USA!

[@brngrofdeth]

Nice job. Hope you polished it afterwards with like some 800 or 1000 grit paper. Looked awfully coarse. Thank you once again. Love, blessings and Merry Christmas!

[@MattsShop]

I did. They were nice and polished when I finished! Thank you Merry Christmas!

[@bigkat1919]

Merry Christmas ⛄🎄

[@MattsShop]

Merry Christmas!!

[@احمد-ط9ق9ث]

ياسلام انت مذهل بعملك وشرحك

[@bennyhill3642]

I wanted to let all know. If working on the three point the only thing you need to really worry about is in the control valve. Before taking tge jam nut off to check the Oring make sure you take a plumb picture of the lock nut. You will HAVE to put it back in the same place lol

[@bigkat1919]

We're getting close y'all

[@MattsShop]

VERY close!