How to connect | program external bell with pyronix enforcer kit1 part5
Вставка
- Опубліковано 21 гру 2019
- Related Program as below:
EP 1. • what is in box pyronix...
EP 2. • How to connect pyronix...
EP 3. • How to connect fob key...
EP 4. • How to connect door co...
EP 6. • How to connect | progr...
EP 8. • How to on-off alarm Py...
For more updates, please subscribe our channel: / @seiluk
Like our Facebook Page:
/ seilinstaller
follow us instragram page:
/ seil_uk_ltd
Visit our website:
www.seiluk.co.uk
How to connect and program external bell with pyronix enforcer kit1 part5. we supply and install also you can buy from our website www.seiluk.co.uk/product/enfor...
Such a nice guy, really helpful and patient , big thank you for you !
Really helpful. Thank you
Thank you for this!
Hi, I have a Pyronix Enforcer system that I bought and fitted a couple of years ago. It now needs to get the siren bell battery changed. Can you advise if the system would need to relearn the bell after fitting. Also I assume I just need to go into engineer mode and then open the external bell casing in order to change the battery. Thanks for any help you can provide.
SEIL UK by entering mode do you mean entering the engineer menu? Basically I have 2 questions : 1. Does the system need to relearn the bell after changing the battery and 2. What do I need to do prior to opening the external bell casing so the alarm does not go off when I open it.
Thanks in advance for taking the time to answer.
@@seiluk
I'm in the same situation to replace the siren battery
Is it just a Phillips screwdriver screw ?
@@seiluk
Thanks for replying
I mean physically opening the box
I can't access the screw ?
@@seiluk
Thank you
Any chance you know what battery is needed ?
Can you connect the bell with wire so no need for battery’s
@@seiluk hi buddy thanks a lot for all the help and where can I buy the led light with the separate battery you have on the side so it lights up please.
Thanks
Thank you very much and could you tell.me the battery you are using for it please. I know you said it in the video but i couldnt make out sorry. You are a very helpful person thanks@@seiluk
I have changed the battery on the siren but is still coming up as a fault,any ideas.
Hi check battery voltage with multi meter must show 3.0v each battery. Also what massage display?
@@seiluk wirls supervn f1
@@andyward937 try to delete and reprogram again panel lost siren. Make sure first 1 bell delete
Program bell link ua-cam.com/users/liveEVpL-0ceJsA?si=DoeAz_6yuB_BjwtG
@ShahzadSheikhs so just gone into menu and scrolled through the menu,I havnt learnt the siren yet but the yellow alert has gone off the panel,tried the siren but not working ,batteries are fine,do I have to take siren off wall to learn it.?
@@andyward937 no need to remove from wall panel leave learn mode and go to bell and hold learn switch for 2 seconds and leave you hear noise on panel bell learn.
Can't hear you