@@legacylocksmith7874great video. What case so you need pin to finish adding key and access the computer via using bypass cable? Little confused. Thanks for your time answering my question
@kidusyafet9972 if you read the IMMO data, you will not need a pin to finish the job. However, if you cannot read the IMMO data, then you will need. There is no bypass cable required. Just follow what I do in the video.
Good man .. I didn't think we could do these unless we had the 12 digit code from Toyota which is unavailable in our market, excellent content, thank you
My pleasure. I am not sure but definitely give it a try. Some of the new Lexus and Toyota’s. I was not able to read the immo data so it’s probably very by model.
Does this work when adding a non-virgin oem Toyota smartkey to a different Toyota? I bought a used Tundra smartkey off eBay to use as a third smartkey for my 23 Tacoma will both these tools get it added to be recognized with my vehicle?
I wish you were in my town. I have a 2021 Lexus LC500 with only one key and the nearest dealer is a couple hours away. The Toyota dealer in town claims they can't do Lexus, and every locksmith it town says 2020 is the newest they can do.
do this work on the Venza 2021? I've tried it but Iwas not able to back up the eeprom - any tips or any other video that shows this? - ps I do have the autek 508 up to date
Hey bro, do you know if it's much different for the blade key (non-smart key)? I mean do I need to wire the Autel to the ignition cylinder and fuse box as seen done by others or it can be all done through the Autel OBDII software as shown here...thanks for the reply.
@@legacylocksmith7874 I've seen some people use Autel 508 with GBOX 2 to make the blade key, not sure if it'll work with 2020 models, have you tried that before?
It’s not working for the keyed ignition models. However, if it’s add to key, you should just clone the chip and the remote you can easily program. Xhorse universal flip work perfect
Thanks for video. . I have a "IM508S". Today, I couldn't made 2020 Toyota Tacoma all keys lost smart key. Do you think if I have the "IM508" Can I make it?
@legacylocksmith7874 I have apb112 tool. I made many Lexus, Toyota smart keys. But, my IM508S said my version can't use lately version. Do you think do I have to upgrade?
You need to read immo data then right before it’s getting to the password it’s going to ask you if you have a saved file then choose the file you saved and you’re good
@@legacylocksmith7874 thanks for your help I got xhorse key tool max pro and Autel im608 pro and this 2020 Corolla akl blade key, but I guess both scanners incapable so it seems no way around it but buying code
I’m sure that problem will be solved with future update. But if you have the Xhorse, maybe you wanna try using this “Xhorse - Toyota 8A Non-Smart Key - All Keys Lost Adapter Via OBD”. I know it doesn’t work all the time but you can give it a try.
Nice video very helpful on bypassing pin code. Do you have to use brand new OEM key only or refurbished Oem key is ok too? Do you have a link for the emulator? It’s a nice tool to have.
My pleasure. i recommend using brand new OEM for these models also verified the exact part number they have a couple of them they look the same. Just Google APB112 You will get results right away.
Hi, I have a 2019 Toyota Rav4 with a VIN code begins with J. I borrowed a Autel Maxi to register a code, couldn't get it done, it asked for ECU registration or something and won't let me register any key. Is there any advice you can give me on this?
Just for my understanding you have no communication with the car? Can you read number of keys? If the car has no keys maybe put the hazard lights on and turn the door lock to unlock position and step a break with your feet and try to see if there is any communication
So this car came with a key fob. I used a general Autel Maxi - i forget the model number and it is not the same one as yours - computer that a mechanic friend of mine uses for his repair business. He doesn’t know much about keys but i had a couple of successes with his Autel. I can get to a part where it says “smart key” and i have programmed two keys for 2016 model cars previously. Once i tap on “smart key”, a message pops up and says “This function registers the key code to the certification ECU. This function carries out online certification. Please carry out after checking an operating procedure.” Then it asks for 12 digit PIN code. I hope i made some sense..
Just checked again for you. Go manual selection in the immo of Toyota. Then go RAV4 and you will have 19 to 2022. (I did 2022 already more than one time)
@@legacylocksmith7874 Hi. I went to Toyota/Manual Selection/Japan/RAV4. I don't have 2019/2022. The newest date is 2010/08-2019/03. My Toyota update version is 4.20. I don't know which one you have. I believe yours is the same v4.20???
bro i tried this method on 2022 corolla smart key and it wouldnt read anything....the ignition wouldnt turn on since all keys were lost so i could not read the immo data....is there another way?
Did you turn a key to unlock position in driver door before you try to read immo data? If alarm is activated you need to do that before reading immo data
@@legacylocksmith7874 thanks for your response brother. I didn’t turn the key in the door lock but the alarm was not activated. I have a friend that has the same car and I tried doing it on his vehicle and I still couldn’t back up the IMMO data even while he had a working key. Not sure why this is happening though…
Hi brooo Im from México City I tried with a 2023 Toyota Rav 4 with an Autel Im 508 but I couldn't. I got the following message "The current version number of the intelligent main ECU software is not compatible" Why did that message appear :(? Do you know any other way to achieve this? Thank you for your comments good night
Maybe it’s a new version. Your Internet was good? Autel probably working on updates for those but you probably gonna need to use the in code out code to do this.
In this case the door was open. The car was involved in a crash. You can just open it in the old fashion way and then the worst case you cut a key and turn it to unlock in the door.
have you tried used OEM toyota smart keys that have been 'unlocked'? I've read even though you unlock them using km100 or 508 they don't pair. They would say 'blank' or 'new' after unlocking but they will not program. Here's a video...but this is a couple years old. I wonder if it is still the case: ua-cam.com/video/i0FknPyT0JY/v-deo.htmlsi=a65tI6rlSClOh93P
@@legacylocksmith7874 thanks for the reply. Have you encountered/experienced it yourself? No wonder they are selling for cheaper on ebay and there's a lot of them.
hello, I want to add a second smart key to toyota rav 4 2020, there is an autel maxiim608pro, when programming does not require a pin code? thank you in advance
@@legacylocksmith7874 I’ve tried it with IM 608 a newer tool and fully updated it did everything mentioned in the video but emulator wouldn’t turn ignition on so I had to use my Nastif account
@@legacylocksmith7874 yes I read immo and generated emulator successfully but wouldn’t turn ignition on with emulator. It probably won’t do certain versions of these vehicles, But even in a add key situation it stills asks for Nastif pin on newer Toyota’s
When I do it, when it gets to the code it asks if you have immo data instead of a code. This was my experience I wander way it gives you so much problems.
Subscribed! I’ve seen a few other people do this but the way you explained it without any bullshit was awesome, keep them coming brother!
This is the goal to give zero nonsense 100% Contant
Legacy locksmith is the best. Great content!!
My pleasure. Stay tuned for more good content.
@@legacylocksmith7874great video. What case so you need pin to finish adding key and access the computer via using bypass cable? Little confused. Thanks for your time answering my question
@kidusyafet9972 if you read the IMMO data, you will not need a pin to finish the job. However, if you cannot read the IMMO data, then you will need. There is no bypass cable required. Just follow what I do in the video.
@@legacylocksmith7874 thanks for your reply. When you said reading immo data, it mean backing up the data ? Thanks again !!
Thank you for your service it was quick and the best price. 100% recommended it.
Our pleasure!
Good man .. I didn't think we could do these unless we had the 12 digit code from Toyota which is unavailable in our market, excellent content, thank you
Yeah. It’s pretty new that update. I will try to upload a lot of good content moving on.
Gosh! the way you do looks so easy, thank you. Do you know if the 2023 RAV-4 will program the same way?
My pleasure. I am not sure but definitely give it a try. Some of the new Lexus and Toyota’s. I was not able to read the immo data so it’s probably very by model.
I've done always up to 23 but never thought you can do it that way.
I used lonsdor or special cables.
Yeah. Similar
Does this work when adding a non-virgin oem Toyota smartkey to a different Toyota? I bought a used Tundra smartkey off eBay to use as a third smartkey for my 23 Tacoma will both these tools get it added to be recognized with my vehicle?
The new Toyota keys must be a version or unlocked keys. I don’t have good experience with aftermarket or used.
@@legacylocksmith7874 thank you for the response, I should give up and try new oem.
Exactly. Works every time
Thanks a lot. Hate the idea of paying for TIS for 2 day subscription for $69.00.
Yeah. It’s annoying.
Though on some new models I still need to use that.
@Legacy Locksmith
Well, you win some lose some. But will take any winning. I appreciate ur work.
Hy bro what's that TIS please I like to know more info about that.
Did this work with aftermarket key I was told newer Toyota only works with oem keys
A friend just did with aftermarket and everything works perfect
Hi, do the aftermarket smart keys (Toyota) sold by UHS work in the new Toyota 2020+?
Only with the Camry I had good experience. For the rest as of now you’re better off going with an OEM.
I wish you were in my town. I have a 2021 Lexus LC500 with only one key and the nearest dealer is a couple hours away. The Toyota dealer in town claims they can't do Lexus, and every locksmith it town says 2020 is the newest they can do.
I’m so sorry to hear that. Good luck
Hello . Wich key did you use oem new or xhorse or aftermarket new
In this case I used new OEM key
Thanks for the content! Very helpful video! Do you happen to know if the XM38 keys from Xhorse (Or Xhorse keys in general) work with these RAV4's?
My pleasure. Stay tuned for more.
Actually, I did an Xhorse key today on Lexus with this system and it worked perfectly
@@legacylocksmith7874for what type of lexus year and model please.
do this work on the Venza 2021? I've tried it but Iwas not able to back up the eeprom - any tips or any other video that shows this? - ps I do have the autek 508 up to date
I didn’t try the venza specifically but what error did you get? Maybe internet connection?
Hey bro, do you know if it's much different for the blade key (non-smart key)? I mean do I need to wire the Autel to the ignition cylinder and fuse box as seen done by others or it can be all done through the Autel OBDII software as shown here...thanks for the reply.
The blade key still needs the rolling code as of now. Hopefully in the next update.
@@legacylocksmith7874 I've seen some people use Autel 508 with GBOX 2 to make the blade key, not sure if it'll work with 2020 models, have you tried that before?
@@mohamednosseir3960 the cave you use to connect to the fuse box is only for Toyota vehicle that take H chip.
Do you think we can program a flip key for a 21 Toyota Corolla without that 12 digit pin. It’s an add key. Your videos are great
It’s not working for the keyed ignition models. However, if it’s add to key, you should just clone the chip and the remote you can easily program. Xhorse universal flip work perfect
i will check thank you @@legacylocksmith7874
Thanks for video. . I have a "IM508S". Today, I couldn't made 2020 Toyota Tacoma all keys lost smart key. Do you think if I have the "IM508" Can I make it?
2020 you should be able. What part you got stuck? You should read immo data then generate analog key then just simply add key
@legacylocksmith7874 I have apb112 tool. I made many Lexus, Toyota smart keys. But, my IM508S said my version can't use lately version. Do you think do I have to upgrade?
Maybe try updating and check internet connection also maybe you can turn key in the door. Worse case you should use the rolling code.
@legacylocksmith7874 thank you~ I'll try sir~ 😃
So this will work an all the Toyota's that require incode/outcode?
Yes.
How can I bypass the password. Everything is good up until that point
You need to read immo data then right before it’s getting to the password it’s going to ask you if you have a saved file then choose the file you saved and you’re good
@@legacylocksmith7874 Thanks. Let me try that.
do i need the xp400 for the all lost key?
No
Dumb question the eeprom file does it need to be downloaded or is already in the software?
You read it through the OBD it’s part of the process. Just connect internet and follow the video
How does the process differ when it’s a blade key? Do you still generate simulator ? Thanks
The blade key still needs the rolling code as of now. Hopefully in the next update.
@@legacylocksmith7874 and the rolling code has to be purchased from nfts ?
Yes. There is another solution with the VVDI but it’s not perfect. Will update when it’s become available with autel.
@@legacylocksmith7874 thanks for your help
I got xhorse key tool max pro and Autel im608 pro and this 2020 Corolla akl blade key, but I guess both scanners incapable so it seems no way around it but buying code
I’m sure that problem will be solved with future update. But if you have the Xhorse, maybe you wanna try using this “Xhorse - Toyota 8A Non-Smart Key - All Keys Lost Adapter Via OBD”. I know it doesn’t work all the time but you can give it a try.
Amazing thank you very much for another great video
My pleasure
Nice video very helpful on bypassing pin code. Do you have to use brand new OEM key only or refurbished Oem key is ok too?
Do you have a link for the emulator? It’s a nice tool to have.
My pleasure. i recommend using brand new OEM for these models also verified the exact part number they have a couple of them they look the same.
Just Google APB112 You will get results right away.
@@legacylocksmith7874 Have you done 2023 Toyota Corolla Hybrid adding key? If so, can we use this same procedure or need special cable and more?
@jamescc2010 I am not sure about the Corolla 23
Hi, I have a 2019 Toyota Rav4 with a VIN code begins with J. I borrowed a Autel Maxi to register a code, couldn't get it done, it asked for ECU registration or something and won't let me register any key. Is there any advice you can give me on this?
Just for my understanding you have no communication with the car? Can you read number of keys?
If the car has no keys maybe put the hazard lights on and turn the door lock to unlock position and step a break with your feet and try to see if there is any communication
So this car came with a key fob. I used a general Autel Maxi - i forget the model number and it is not the same one as yours - computer that a mechanic friend of mine uses for his repair business. He doesn’t know much about keys but i had a couple of successes with his Autel. I can get to a part where it says “smart key” and i have programmed two keys for 2016 model cars previously. Once i tap on “smart key”, a message pops up and says “This function registers the key code to the certification ECU.
This function carries out online certification.
Please carry out after checking an operating procedure.”
Then it asks for 12 digit PIN code.
I hope i made some sense..
Oh sorry I didn’t have that apb112. So i guess that simulator lets you bypass the step where it asks me for the pin code?
It’s simulating the key, but to pass the code you need to read the immo data
*I also have the Autel IM508. I went to do a RAV4 (2019/11) today but I only had RAV4 up to 2019/3. No 2019-2022 in mine?*
Did you update your Autel in the last couple of months?
@@legacylocksmith7874 Yes I did last night. Still the same. Toyota v4.20. RAV4 is covered up to March 2019.
Just checked again for you. Go manual selection in the immo of Toyota. Then go RAV4 and you will have 19 to 2022. (I did 2022 already more than one time)
@@legacylocksmith7874 Hi. I went to Toyota/Manual Selection/Japan/RAV4. I don't have 2019/2022. The newest date is 2010/08-2019/03. My Toyota update version is 4.20. I don't know which one you have. I believe yours is the same v4.20???
We are in the USA I guess it’s not the same.
Hello,was it possible to read the imo data directly via obd?
Yeah. This is what I did.
Thank you
Hey what’s that device called?
IM508 & APB112
@@legacylocksmith7874 I looked it up. Says it’s not compatible with Lexus. I wanted to order it
Excuse me, the key you used is the dealer's original key or is it generic?
This was original OEM Toyota key. The aftermarket is so so for this model
Do u need the Toyota bypass cable to do this or only the abp112 emulator?
Only ABP112. No cable OBD only
Can a new toyota prado 2022 be reprogrammed?
I don’t know. We don’t have it in the USA market
Will that little box. Start the car. Even without the key. I see that it turned the ignition over .. the key generator box thing 😂
Yeah. It’s can definitely start the car.
bro i tried this method on 2022 corolla smart key and it wouldnt read anything....the ignition wouldnt turn on since all keys were lost so i could not read the immo data....is there another way?
Did you turn a key to unlock position in driver door before you try to read immo data? If alarm is activated you need to do that before reading immo data
@@legacylocksmith7874 thanks for your response brother. I didn’t turn the key in the door lock but the alarm was not activated. I have a friend that has the same car and I tried doing it on his vehicle and I still couldn’t back up the IMMO data even while he had a working key. Not sure why this is happening though…
@@Cali415 I believe you need Internet or hotspot connection
@@Cali415because that ecu isn’t supported
Can you provide link to the eprom video that pairs with this? You mentioned that you already showed it to us.
On this one you read the immo data OBD. No need to eeprom
Great man! Thanks
My pleasure
Excellent video my friend 🙏, can you please upload a video making a duplicate of any Toyota 2022 to see the procedure?
What do you mean? How to do that job in add a key and not all keys lost?
@@legacylocksmith7874 Thanks for responding so quickly, I need to add a smart key (duplicate) for Toyota Rav4 2022.
Then just do the same like in the video the only thing you can skip is the emulator generator part and use old key then new key.
@@legacylocksmith7874 OK, thanks, I'll try. Is there no risk of deleting the customer's original key?
@@franciscoduarte8249never worry with toyota
Hi brooo
Im from México City
I tried with a 2023 Toyota Rav 4 with an Autel Im 508 but I couldn't. I got the following message "The current version number of the intelligent main ECU software is not compatible"
Why did that message appear :(?
Do you know any other way to achieve this?
Thank you for your comments
good night
Maybe it’s a new version.
Your Internet was good?
Autel probably working on updates for those but you probably gonna need to use the in code out code to do this.
So the XP400 isn't needed? Autel has listed as the emulator has to be used with it but looks like you didn't need to.
Yeah, I have seen they said you need to use it with the XP but you connected right to the IM. No xp400
@@legacylocksmith7874 Happy I found this video, have a '21 I have to do this week. Subscribed!
@@scottjohnson9102 Did it work?
I did and it worked
@@Highdesertlockaz yes worked great
hi ,
it is working for 2023 toyota sienna hybrid ?
thanks you!
I haven’t tried. But connect to the car and see if you can read the immo data. I will definitely update after doing that.
@@legacylocksmith7874
thank you !
have a great day from Canada!
How did you open the door
In this case the door was open.
The car was involved in a crash.
You can just open it in the old fashion way and then the worst case you cut a key and turn it to unlock in the door.
Good
👍🏻
merci pour le partage
My pleasure.
Doesn’t work on Toyota hilux 2022 I failles two times 😭😭😭😭
We don’t have that model in the US but what part it fails? It’s All keys lost or adding a key?
Thanks
My pleasure. Thanks for your support
🙏🙏🙏🙏
My pleasure 😇
This won’t work for all Toyotas some ecu versions you can’t do it.
You are correct. I’m expecting more to be uploaded.
@@legacylocksmith7874 I remove the ecu and do this through bench with Gbox
Can I use aftermarket blank key for this method? Or must be original oem key?😂
Yeah. Definitely. But you need a good one. Some of them for the new Toyota don’t work.
@@legacylocksmith7874 thanks for your help
Can you recommend a place to find great aftermarket key 2020 Corolla
Even uhs don’t have any
Balde key 2020 Corolla LE 😊
Try key4 or transponder island
Olá amigo bom dia! Sou do Brasil top demais sua aula! Posso fazer a cópia direto sem o simulador?
have you tried used OEM toyota smart keys that have been 'unlocked'? I've read even though you unlock them using km100 or 508 they don't pair. They would say 'blank' or 'new' after unlocking but they will not program. Here's a video...but this is a couple years old. I wonder if it is still the case:
ua-cam.com/video/i0FknPyT0JY/v-deo.htmlsi=a65tI6rlSClOh93P
For the old ones you can erase them but unfortunately it’s not the case in the new keys. Only new will work
@@legacylocksmith7874 thanks for the reply. Have you encountered/experienced it yourself? No wonder they are selling for cheaper on ebay and there's a lot of them.
I tried using a refurbished ones and didn’t work even though it was showing unlocked
@@legacylocksmith7874 good to know. thanks!
hello, I want to add a second smart key to toyota rav 4 2020, there is an autel maxiim608pro, when programming does not require a pin code? thank you in advance
No. Follow the steps I did and no pin is required. The tool takes the pin from the immo file.
Doesn’t work in all models trial and errors waste of time. I’d rather use PIN code and be done with it
Here in the US, it works for all the models using this system. Done many of them
@@legacylocksmith7874 I’ve tried it with IM 608 a newer tool and fully updated it did everything mentioned in the video but emulator wouldn’t turn ignition on so I had to use my Nastif account
Were you able to read the immo data?
@@legacylocksmith7874 yes I read immo and generated emulator successfully but wouldn’t turn ignition on with emulator. It probably won’t do certain versions of these vehicles, But even in a add key situation it stills asks for Nastif pin on newer Toyota’s
When I do it, when it gets to the code it asks if you have immo data instead of a code. This was my experience I wander way it gives you so much problems.