XP DEUS depth test and deepest settings
Вставка
- Опубліковано 4 жов 2024
- In this video I will show you the difference between the deepest XP DEUS program, which is the RELIC program and the other programs. The tested object is a 20 mm silver medallion buried at 25 cm (10 inches). You will see that in this depth we have a detection only with the RELIC program. The difference between the RELIC program and the others is that the REACTIVITY is set to ZERO and this is the most important EXPERT settings which affects the detection depth. As well, we have the TX POWER = 3 in the RELIC program, but trust me, you do not need TX POWER greater then 2. It is tested and TX POWER = 3 is not deeper then TX POWER = 2, but it is more unstable. So, TX POWER = 3 makes the things worst. As well, if you set the AUDIO RESPONSE to 6 or 7 you will hear the deep signals better. And at the end, do not forget about the ground balance! Set the ground balance a little bit (3-5) lower then the PUMPING mode shows and you will hit one even two inches deeper! And believe me, set it properly and the XP DEUS is deep as the E-Trac in manual sensitivity mode and the PRO coil. Very deep metal detector for this small size coil.
I would like to point out 1 important factor here on this test. You're coil is scraping the surface with no hindrance in-between. Like tall grass or natural obstacles keeping you from getting the coil to ground level. I appreciate your taking the time to do this and giving optimal settings for depth. I just felt the need to point out that one little factor. Awesome test though. Thanks. I love the Deus
Awesome test. I thoroughly enjoying watching these Deus vids (as a Deus owner) and I appreciate the effort that you made to put this together. Sincerely. Liked, and subscribed
You are welcome! I do not like too big coils, so for now I will stick to the base one. When the announced 11" coil is released I will consider, but the 34x28cm is too large for me.
And the most important is to set the ground balance manually a little bit lower (3-5) then the PUMPING or TRACKING ground mineralization numbers. If you work on the factory fixed ground balance (90) you will have 10-15% lower depth. You do not need TX POWER greater then 2!
Cool depth test box well done ! Clean neat and precise ant from Wales UK will stick wi me AT Pro tho
Thank you for video testing Sir... It is important for me to know before buy metal detector
Dobry test!!! Juz nie moge sie doczekac kupna deusa!!! Pozdrowienia z Polski!!!
I appreciate what you are doing here, however, it is not "real" conditions and I'm wondering what settings I would use in some of the ground I come up against. Not wanting to be a party pooper but this material looks loosely packed and is coarse looking, would the same apply in wet clay, heavy ground or mineralised soil? I still gave you a like and thumbs up because your test will definitely help some detectorists out there. Cheers.
Браво, едно хубаво видео и хубава настройка. Поздравления!
Complimenti per il video ,molto chiaro ed esaustivo . Ho imparato qualcosa sull' utilizzo del Deus ,grazie
Really good video m8 out on pasture on Sunday so I've programmed it into the module and will try it.
Kind Regards
Colin
like it?
Thanks for the test - Keep them coming - Deus owner also - subscribed
Could you post or send me your "My Deep settings" and what program you used as the starting point before making the changes. Great video and thank you.
Hi ... could you tell as what about of the SILENCER setting ... 10x
Thanks Hobby Man your a legend helped me a lot to figure out what metal detector to buy lol think I know which 1 now :)
Really useful thanks mate for sharing!
Nice.. !! I want to build my self a depth test box like this !! Thanks for this great Idèa :)
Would of been nice to see all programs have a go.
Goldfield would of seen that target, as goldfield is an all metal mode.
By my opinion the DEUS is the best all around metal detector on the market and you can not go wrong with it. Only have in mind that you should charge the coil every 10 hours and you should know that the DEUS coil can not transmit the signal under water.
Of course. The base program is RELIC, In discrimination->expert I have set two-tone discrimination. In Audio Response i have set 6 or 7, because I want to hear the week signals louder. Reactivity of course is zero. Frequency 7 or 12 kHz works best.
I have been in the hobby just a short time now and have a Garret AT Pro which I enjoy, but I am already thinking of getting another detector. I am on the fence between a Minelab Etrac or a XP Deus, between the two which would you choose? Enjoy your vids, Thanks.
I have watched this a number of times hobby man. Great video, since they have launched different version which version. Are you using now and if you have time could you do a gold test. With the deus
Hi! I have had the Deux XP for 2,5 years. The last 6 months I found 61 jewelry in gold, mostly rings on the French Riviera. GM POWER program, React 2, Audio 4, TX3, Silence 0, Sens 99, Discri 6,8....
Hi,Are you using the 9" DD coil in this video?I'm thinking of getting this detector but not sure if I should get the 9", 11", or the 13" with it.Which coil can detect deepest out of the three coils?
11 la mejor para todo tito
The 13” but the 9” is the best overall coil, it’s has the best separation, has real decent depth, and is lightweight.
Hi, Why do you not like to use the big 34 x 28cm coil.
Does it not do very well in places where there is little trash?
Regards from Sweden
What silencer value for DeepMy program?
0 or -1
To go deeper you need slow recovery speed, but of course you have to decide this on a base of the place, where you hunt. Reactivity = 0 is suitable only for clean sites, where you want to hit as deep as is possible.
i mean The ground is very important!
Is this on the V2 or V 3.2... great vid thanks for sharing
What is the pro coil is that a X35. I have the old black coil mate.
Of course. In discrimination->expert I have set two-tone discrimination. In Audio Response i have set 6 or 7, because I want to hear the week signals louder. Reactivity of course is zero. Frequency 7 or 12 kHz works best. And the most important is to set the ground balance manually a little bit lower (3-5) then the PUMPING or TRACKING ground mineralization numbers. If you work on the factory fixed ground balance (90) you will have 10-15% lower depth. You do not need TX POWER greater then 2!
Tell for as about a silencer mate ...
What about of the SILENCER ?!?
es novato seguro que ahora ya lo sabra jjejejej
How have you put the box together budy
In some conditions like beach hunting, or heavy mineralised soils the E-Trac can go deeper. On the other hand in trashy areas the DEUS can not be beaten.
If you chose the E-Trac forget about the automatic sensitivity mode. It is complete nonsense by my opinion. I have a video in which I demonstrate how shallow it is.
what's the iron setting for this deep prog
I was lead to believe that when changing a program one had to lift the head four feet above the ground to let the program properly adjust before using it ... I am getting lead flax bale seals at 12" plus in GM Power wheras Relic won't get them ... strange in it ????
no it's not strange, go to relic and turn the silencer to 0
FLSwampStomper will try it .. thanks
Any way to share ur my deep program settings?
Can you write down this program please budy in your writing bellow mate. I'm new to the deus and I'm grttin disheartened as I haven a clue if mine is goin deep or not or if there is nothin deep in my fields. I have done a deep setting from a video of UA-cam but everythin I dig is only at a 1inch deep. On the other hand my mate with me has a Q40 and he was laughing at me yesterday as he could see my frustration he was digging very small targets at 10 and bellow inches. I understand I have a long way to go to learn. But would like a program I no that's deep. Also I'm struggling to understand what means what and when and why I need to change settings. As you mentioned some in your video. Do you have a email or can you send me some good deep settings if i give you my email please budy regards Ian. From Cheshire.
I have both and I can say they are probably the best detectors on the market, but the E-Trac is SLOW !!! and HEAVY!!! On the other hand the DEUS is the fastest detector on the market, it is light, compact, you have many factory programs with different purposes, it can be updated !!!
nice vido well made to. can you get it to go deeper lololol very good test tho
😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
No ground balance. No lowering the silencer. Low sensitivity. I could go on. Really bad "test."
Barry Swope got a link to good deep settings / deep calibration?
Cant make much sense of this. Are you deaf mute? It would be great if there was some verbal
No good