I want to get these for my 2021 dodge charger scat pack. But im curious if you have had any problems with them since the installation. Or any issues in the cabin. With check engine/ lighting code.
I like the Diode Dynamics products I have in my 2020 Charger Widebody now side markers/interior lights. Why did you choose these lights over others brands?
@@evank33 I've had them in my Charger Widebody for 9 months now and they're perfect. Not one issue. Super clean beam pattern and bright white forward lighting. Make sure you clock the Led chips at 3 and 9 o'clock to get that perfect beam pattern. I purchased the anti flicker modules for $50 but didn't install them. In my opinion you DON'T need them. The Led's haven't flickered once and I couldn't be happier with my decision to go with the GTR Ultra 2's..Lifetime warranty too.
F8 Scat thanks for the reply, I installed them and haven’t noticed any flicker yet and no codes. I did look it up by vehicle make and model and picked them from there. Maybe we don’t need them for the 2020’s?
What's up F8 I just ordered my 2020 widebody iam looking for the model number you have on the diode for hi/ low beam. So if you can provide me with the same model you have it would be greatly appreciated thanks. Love your scat an the videos
Hello: in your prechecking for the correct side positioning of the led bulb, Are you looking at the headlight from the outside? Or inside? If inside, how? Marking the headlight bulb assy? I just received my pkge today. Can you elaborate, its hard to tell from the camera angle. Thnks!
do you think the 180 price is worth it ? i see your saying its slightly brighter than stock. and have you had any problems with em ? im on the fence about ordering some
Im hesitatant to spend almost 200.00 to get a small increase in light output(as you said, not much) and the Halogens are offered in higher output versions. I had HiD in a previous car and the output was great, 6k, but...the wiring was a nightmare. Tucking and wrapping to conceal. Im debating diode dynamics vs Retrofit source Morimoto newest led. EDIT: After some more comparisons and research. I purchased the D.D. SL 1 leds. Just arrived today. ( they offered a 20% off promo. ) pulled the trigger.
@@F8Scat Thanks for your reply. The Hid will most likely void the factory warranty, Very tedious process ( Had one in my previous vehicle) , and have been researching online. It came down to 2 choices: Diode dynamics SL1, and the Morimoto 2 stroke 2.0. The Morimoto has a straight Base, no 90 degree connection witch requires an extension cap. Videos on YT Diminished my opinion of Morimoto due to lower lux, complexity, and $20 dollars higher price. Q1: How did you come to the decision on Diode dynamics? Are you still Happy with your Lights? and last.. would you change anything or have any issues at all? I have a 19 Challenger with Halogen Projectors. Thank you.
so did you adjust your rings so the fan/light is pointing down or up? I left mine in the out of the box position and they are pointing up. I do have one of thos little triangle shadows in each light, and the high beam function doesn't seem to do much, like they dont brighten up more road.
@@F8Scat finally got around to adjusting them. they were in the stock out of the box fitment, with the fans pointing to the passenger side. turned the ring about 90° and it totally changed the beam pattern of the high beams. Also got rid of the small sliver of a shadow in the bottom corners of the low beam pattern. Thanks.
Will these lights blind oncoming traffic. I am looking at getting the low beam ones. Also has changing to these bulbs given the car any error messages popping up on the dash?
F8 Scat what is the purpose of the Anti-flickering? I have a 2017 Camaro LT and I installed these yesterday and didn’t put anti flickering in. Do I need those?
What part number did you order? I have your exact car on order and should receive in a couple weeks. When I enter in the make and model it gives me www.diodedynamics.com/replacement-oem-hid-bulbs-for-2011-2020-dodge-charger, which aren’t the SL1’s, and when I go to the SL1’s, to choose the make and model, there is no Charger option, only Challenger.
Disregard. Didn’t read far enough into the comments and you already gave the part number to someone else. Thanks. I also plan on installing the halo LED’s as well. Do you think there will be enough space for the additional power source?
Funny my 2020 wide body Scat pack came with LED headlights.
It is in the package you get.
Is it led? Mines a 20 as well and came with hids like my 15 Durango rt
Definitely do not come led stock they are HID
🔥🔥
Can you make a night video please?
How good does that color march the daytime running lights? What color did you choose? How much brighter were they?
Nice job! Think I will install them also.
I thought it came with hids? But those look wayyyy better than stock
Nice video
How are they at night?
Can we see a night video???
How is it driving at night ?
I want to get these for my 2021 dodge charger scat pack. But im curious if you have had any problems with them since the installation. Or any issues in the cabin. With check engine/ lighting code.
I like the Diode Dynamics products I have in my 2020 Charger Widebody now side markers/interior lights. Why did you choose these lights over others brands?
@@F8Scat Thanks for reply. Decided to go with a set of GTR Ultra 2.0 Leds with the anti flicker module. Thanks for all the great videos.
@@bkny6798 how are the gtr, do you need the antiflicker module?
@@evank33 I've had them in my Charger Widebody for 9 months now and they're perfect. Not one issue. Super clean beam pattern and bright white forward lighting. Make sure you clock the Led chips at 3 and 9 o'clock to get that perfect beam pattern. I purchased the anti flicker modules for $50 but didn't install them. In my opinion you DON'T need them. The Led's haven't flickered once and I couldn't be happier with my decision to go with the GTR Ultra 2's..Lifetime warranty too.
Hey are those lights really bright at night?
Just got mine delivered today but it didn’t come with an anti-flicker module? 2020 Scat pack Charger. Do I need to order it separately?
F8 Scat thanks for the reply, I installed them and haven’t noticed any flicker yet and no codes. I did look it up by vehicle make and model and picked them from there. Maybe we don’t need them for the 2020’s?
Wow thanks I installed mine a few months ago but it didn’t adjust the ring like you did thank you !
What's up F8 I just ordered my 2020 widebody iam looking for the model number you have on the diode for hi/ low beam. So if you can provide me with the same model you have it would be greatly appreciated thanks. Love your scat an the videos
@@F8Scat thanks
Why can I not find this part number?
Exactly what i needed to see. No music next time please. Could barely hear you
Did you just plug them in or did you have to adjust the base ?
Is the high beam bulb the same as the low beam for these cars or do I have to buy two pairs ?
Hello: in your prechecking for the correct side positioning of the led bulb, Are you looking at the headlight from the outside? Or inside? If inside, how? Marking the headlight bulb assy? I just received my pkge today. Can you elaborate, its hard to tell from the camera angle. Thnks!
do you think the 180 price is worth it ? i see your saying its slightly brighter than stock. and have you had any problems with em ? im on the fence about ordering some
Im hesitatant to spend almost 200.00 to get a small increase in light output(as you said, not much) and the Halogens are offered in higher output versions.
I had HiD in a previous car and the output was great, 6k, but...the wiring was a nightmare. Tucking and wrapping to conceal. Im debating diode dynamics vs Retrofit source Morimoto newest led. EDIT: After some more comparisons and research. I purchased the D.D. SL 1 leds. Just arrived today. ( they offered a 20% off promo. ) pulled the trigger.
@@F8Scat Thanks for your reply. The Hid will most likely void the factory warranty, Very tedious process ( Had one in my previous vehicle) , and have been researching online. It came down to 2 choices: Diode dynamics SL1, and the Morimoto 2 stroke 2.0. The Morimoto has a straight Base, no 90 degree connection witch requires an extension cap. Videos on YT Diminished my opinion of Morimoto due to lower lux, complexity, and $20 dollars higher price. Q1: How did you come to the decision on Diode dynamics? Are you still Happy with your Lights? and last.. would you change anything or have any issues at all? I have a 19 Challenger with Halogen Projectors. Thank you.
wheres your oil cap
so did you adjust your rings so the fan/light is pointing down or up? I left mine in the out of the box position and they are pointing up. I do have one of thos little triangle shadows in each light, and the high beam function doesn't seem to do much, like they dont brighten up more road.
@@F8Scat finally got around to adjusting them. they were in the stock out of the box fitment, with the fans pointing to the passenger side. turned the ring about 90° and it totally changed the beam pattern of the high beams. Also got rid of the small sliver of a shadow in the bottom corners of the low beam pattern. Thanks.
Please show us a light output and beam pattern video at night
Will these lights blind oncoming traffic. I am looking at getting the low beam ones. Also has changing to these bulbs given the car any error messages popping up on the dash?
F8 Scat what is the purpose of the Anti-flickering? I have a 2017 Camaro LT and I installed these yesterday and didn’t put anti flickering in. Do I need those?
Great info, what temperature is that?
Did it have any flickering after installing? I’m wondering if I need to get anti flicker modules for my Durango RT
F8 Scat so you do need them when installing these LEDs ?
F8 Scat oh okay appreciate the info
F8 Scat I have a 2017 Camaro LT 2.0L do I need anti flickering and which option do I need.
What part number did you order? I have your exact car on order and should receive in a couple weeks. When I enter in the make and model it gives me www.diodedynamics.com/replacement-oem-hid-bulbs-for-2011-2020-dodge-charger, which aren’t the SL1’s, and when I go to the SL1’s, to choose the make and model, there is no Charger option, only Challenger.
Disregard. Didn’t read far enough into the comments and you already gave the part number to someone else. Thanks. I also plan on installing the halo LED’s as well. Do you think there will be enough space for the additional power source?
Thanks!!
If the LED came with a module attached is it necessary to purchase the anti flicker harness?