How To Remove A Subaru Engine (Step By Step)
Вставка
- Опубліковано 15 жов 2024
- You guys have asked for this video for a while so finally decided to throw it out there. How exactly do you remove a Subaru Engine? Well lemme show ya! This is pretty applicable to any Subaru. Yes some things will be different between all chassis but it should apply.
In this video I am using a 2006 Subaru WRX STi as the car we are removing the engine from. Older cars will typically have some things break as you go to remove items but don't sweat it to much, You can do it!
Join this channel to get access to perks:
/ @smeedia
Smeedia Merch: www.smeedia.ne...
Smeedia Discord Server: / discord
Send Me Stuff (P.O Box Address)
Tanner Smith
Smeedia
1002 N Meridian Ste 100 PMB 120
Puyallup, WA 98371
Parts Used:
Company 23 Fuel Line Tool: amzn.to/2T0MSjp
Company 23 AVCS Intake Cam Gear Tool: amzn.to/3fpywR1
Company 23 AVCS Exhaust Cam Gear Tool: amzn.to/2S79fDu
Company 23 Non AVCS Exhaust Cam Gear Tool: amzn.to/2RkO0xY
Hex Key Set (1/2"): amzn.to/3uZbebc
Engine Stand: amzn.to/3fv9fFn
Engine Hoist: amzn.to/3hxVyYI
Suggested Tools:
Beginner Tool Kit: amzn.to/3jcRFqn
Starter Electric Tools: amzn.to/2OttJRC
Cheap Pilar Set: amzn.to/3eCliOC
The Best Light for working on your car: amzn.to/30lQ89b
Fancy Ratcheting Wrench Set:amzn.to/32sQixY
The Best Metric Socket Set: amzn.to/2ZzgaX0
You need Jack Stands, Duh: amzn.to/3h7oB1T
But you also need a jack...: amzn.to/30faaCc
Hook and Pick Set to grab all the small things: amzn.to/2Oui58X
Tape measure to get them lengths: amzn.to/2CD432i
Measure all the Small Things: amzn.to/3fCj7vM
The Only Screw Drivers you need: amzn.to/3jaYid6
Fancy Electric Impact: amzn.to/30gqUc9
Battery for your Impact Boi: amzn.to/3j94kuH
Trust me you need Pry Bars: amzn.to/2WtIUyu
Audio:
Malecon by Soyb & Amine Maxwell
/ soybmusic
/ aminemaxwell
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Underground Stars by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Logistics - MusicbyAden & tubebackr
/ musicbyaden
/ tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Track: We Were Young - Vendredi [Audio Library Release]
Music provided by Audio Library Plus
For 1st time folks. Mark hoses with painters tape, number them and write where they go in a notebook. That way on the way back to install them you dont miss a single one, mark them off the list and remove the tape (that way if you see tape, you missed it) Group bolts on zip lock bags and write where they go. Mark direction of parts that same way. Great video wish it was out 7 months ago when I pulled my engine out. 😂
All great tips as well! That's what I did the first time I pulled mine 🙏
i usually just put everything in a can and then forgot where nuts bolts go.
Damn wish I would’ve done this before I was half way done pulling it
Glad I’m not a first timer 😂
Fake news I'll remember where everything goes in 5 months time 😂
This is why I mainly watch your channel cause you look out for the little guys and give us true how to videos
Always will where i can ❤
totally agree man, most others just talk as if everyone are pros.
Bro he did make it for us. I asked him last year cuz I need to do a 02 bugeye engine removal. He hooked it up for sure
Your thorough knowledge of the Subaru platform is goals man. You make pulling an engine look as effortless as changing clothes.
After so many of them they're not too bad to do, hoping that this helps others when they need to pull their own engine 🙌
In general when you learn a platofrm and do it often, it becomes easier and faster by many hours. You might start off taking days to do to a few hours depending on experience
Just an FYI for anyone doing this, don’t remove the pitch stop. The pitch stop isn’t holding the engine, it’s holding the transmission and has up and down movement so it will not brake. You will have no problem getting the engine out with it in and then you’re not leaving your transmission sitting on 2 shafts and 1 mount.
I love how you say “don’t need to lift the car to pull the engine, remove intake, intercooler, battery, alternator” then removes in reverse order and immediately lifts the car 🤣 love it! I definitely appreciate you breaking it down in a quick tutorial, not overly in depth, not full of filler
Anytime 🥳 tried to just get the main points In 😅
He said you don't need "A" lift, as in a car lift. Jack and jack stands for us poor folk.
A year old vid and still relevant for the weekend broke mechanic. Thanks for the basics. You make it look easy will definitely try it myself when I get my turbo motor. Awesome job brah. 🤙🏽
This is the most in depth engine removal I've seen so far thank you Smeedia!
Glad I could help 🥳
You may see an increase in views simply because I've been watching this video religiously as I'm currently pulling my 05 WRX motor out. Thanks for the guide man, this is awesome!
Glad the videos had been helpful and good luck on the engine removal 🥳
Just a tip, when I pull my motors I set the engine leveler front to back and the engine comes in and out so much smoother and no binding during installation
I have never even changed oil before but after seeing this video I genuinely believe I can fumble my way through this. Thanks for the great content.
Glad I could help and you totally can do it! 🔥💪
Well my subie just broke down and I'm done with it I want to sell it but some thing deep inside me is telling me don't do it just fix it you put so much money don't let depression and what's going on in life put you down I'm get her fix I put her up for sell but I'm not in a hurry I will either sell it to the right person or get her fix and this is why I knew following you and watching you would help me out thank you for putting this up!!
I'd say sit on it for a little while, trust me I've 100% been there too, have made the choice to sell some that I ultimately regret 😮💨
@@Smeedia Im do that instead you have a point there brother.
Bro! The old hat was awesome. I’m sure ppl that were complaining don’t typically work on their own cars lol
Lol the old hat still lives, but neded a new one anyway so gotta break it in 😅
Oh thank goodness you didnt get rid of the old hat, My eyes were glued to the screen just so I learn this.👍🏼
Lmao it lives on!!!!
Awh man I’ve been waiting for this video since the beginning of the Channel! Hoping one day to put it to good use! Keep up the good content!!
It'll be here when you need it 🙌🙏
No joke I’m going to need this video at some point when I decide to replace my clutch
When the time comes, the video will be here 🙏🔥
Great Vid Mate Picked it up From your How To Refresh your Old Subaru Engine
Thank you 💪🙏
Dear God I finally made it... Obligatory first comment. Have a great day dude live the energy, dig the precise concise and incisive way that you create your content.
❤😁 you have a great day as well! 🙌
Enjoyed more than watching a movie.learned a lot and feel soo good man.bro after watching these videos on your channel makes me motivate to do more things on my sti without any fear.🍻
That's the goal 🙏🙌 try to help others get the info needed to do these things 😁
Shaving profile brother, now this is the vid totorial im looking for, keep it up brother💪💪💪I'll give it a shot
🙏❤🙏❤🙏
This is gonna be useful. I just found out my rear main seal is pissing oil, so I gotta pull the engine
Ooooooooof 😖 annoying seal to be leaking, hopefully thr video helps 😁
I believe 02-05 wrx and 6 speeds have the pin that needs to be removed because it's a pull style clutch. Push style does not have this so you don't need to worry.
First impression of video was Tanner no beard 🤔🤔🤔 ???? Shit am I watching an old video?? 🤣🤣🤣. Love these videos!!! 👍🏻👍🏻
🤣🤣🤣🤣
Great this will help me on the Bugeye, cylinder head cracked on cylinder 4 spark plug threads :(
Noooo 😭😭😭😭 glad the video will help though!
Gunna slap a new head on it and hope for the best, putting in a built engine by the end of the year so I just need to make it last until then 😂
Two questions for you as I am prepping to replace a clutch in my 18' STI (never let you girl drive your STI when the last standard she drove was years ago and was a 90s civic....) any way. 1. do you have to remove the intake manifold to pull the engine, or will the engine come out with the intake still bolted on with all the appropriate connections and hoses removed? 2. I am assuming that with removing the turbo, down pipe, headers and intake etc... that I'll need to replace all the gaskets to these parts as well, correct? Thanks for the awesome video @Smeedia, always look forward to your new videos!
I left both both intake, turbo and exhaust manifold on while pulling the engine, super easy! Everyone has their own way ofcourse! I just hate leaning over the enginebay
O don't blame you, always felt like everything got in my way when removing it all 😅
Hey man, great video, doing my engine for my Impreza and a doner Impreza next weekend, this video was great
Good stuff. I've always just kept the fuel lines connected and just flipped the intake/tgvs off to the side like you would with the ac and power steering units.
I've done that before as well, multiple ways to get them out of the way 🙌
No beard! It’s been a while! Another fire video my dude! Keep it up
Thanks my man! And needed to let the face free for a bit 😅
@@Smeedia it’s been a minute for me as well 😂 maybe time to clean shave during COVID because it grows back quick and I forget what my face looks like 😅
Thank you bro keep up the amazing work we all appreciate the content so much!!
Ok can we just all appreciate the amazing type of video that we should all have to pay to watch as the quality is just that good plus the knowledge is everywhere in the video. @Smeedia I hope you get a shit ton of new subs as it would be well deserved. Type of video that should not have a dislike button.
❤❤ trying to help out where I can ❤❤
Lol JUST in time IAG built block going in soon. Bro you’re a wizard!
(also bring the hat back!, it’s a staple on this channel)
Lop I still got it, but need to break in this new one 😅
@@Smeedia as long as ol’ reliable makes a comeback I’m all for it lol
Stellar and extremely informative video. Gota swap my throwout bearing and it seems i gota pull the engine. (New subaru owner)
New engine break in tutorial?! Tips tricks dos an don'ts 👀🙌
On my list to make 🥳
Dang Bro! I was literally searching YT yesterday for this exact thing; the whole time I was thinking man, I wish Smeedia had a video on this. Awesome content!
Eyyyy I got you 🙌🙏😁
If you were doing a clutch (without a lift) would you rather pull the motor, or pull the trans?
Pull the motor 100%
Luckily I have some friends that pull EJs all the time. One of them is the owner of the shop and the other's his main mechanic. They can both do it practically blindfolded by this point.
Oh yessss good resource to have!
Dear lord, the down pipe bolts are nightmares. Got an old Bug Eye I'm tearing down, and its rusted to hell. Rounded nuts that are rusted! Uggghhhhh!!!!!!
Great video though. I'm almost ready to pull mine out.
Nice and quick to the point, starting my jdm motor swap project and needed a refresher.
Just curious why you removed the intake manifold? Doesnt seem like it gets in the way of anything
You should do tv. Hear me out. Travel across the states helping people with their builds. Show’s been done before, I know. But not quite for just us car guys, in-line, boxer, a-like. And you’re entertaining. Lol seriously though great content, please keep up the good work. Thanks
That would be killer to be able to do and a blast! No idea how to make that one happen though 😅 always appreciate the support my friend ❤
So good bro, thank you for this! Doing it for my first time, feel much better now!
Fantastic step by step boxer engine removal. Thanks for the awesome video
NOTE: As far as I can see, the slide pin removal applies ONLY to Imprezas. I am (trying) to get the motor out of my NA Forester and there appears to be no slide pin.
everyone i talk to say they hate working on subaru motors because they are the hardest motors to work on and that always baffles me, ive never come across a motor more easily worked on!, everything is up top or in the front to get access to. It can be pulled in less than an hour. I think the whole having two heads on opposite sides of the motor scares people.
Totally agree! They're much easier to work on that what people make them out to be!
This definitely makes it a little less daunting. Solid video man!
Thanks my dude 🙌 it's not too bad to do 🔥
I just purchased my first Subie (2018 STI) and immediately started researching. You have a great, informative channel and awesome videos! And BTW, this channel is SERIOUSLY underrated, keep up the awesome work!
Congrats on the car and appreciate thr support and feedback! Always open to questions if you've got em 🙏
How’s your car
Omg I’m so nervous! Need to grow some forsure lmao. I got leaky valve seals in my 05 waggy and need to pull the motor. Never pulled a motor outta anything in my life. This video has boosted my “fake it till I make it” type of confidence. Any suggestions on replacing things on the way for insurance ? Gaskets ect. Car has no other issues as of rn. Just some smoke 💨 when she fires up then it clears up after a few seconds. But the smell lingers and chokes ya. Also had to apologize to ransoms at the pump for engulfing them in smoke😮💨🤣🤣🤷♂️
Know out all gaskets while your in there, it's really not as bad or as hard as it looks to pull them, I promise 🙏🙏🙏
So glad you did this now I will be able to take mine out based on this guide ✌🏽
❤❤❤
Hey tanner what's up, I was thinking about trying to rebuild my engine and redoing all the gaskets,the guys I bought the car from said they changed the head gaskets but I don't trust them and the people who owned it prior didn't seem to take care of it we shall see
Keep me posted on what you find!
I'm finally doing it, bro! I'm about 40% there, id say. Just gotta do a few more steps and I'm there! Thanks for the inspiration!!
always love your video, I hope more people know about you!
They're slowly getting out there 🙌😁
I just spent hours trying to figure out why i couldnt get bolts to thread in above the dowels.... Currently facepalming lmao thanks for helping me figure it out🤣
Glad the videos helped 🙏🙏🙏 we all do it 😅
Love that this video isn’t an hour long. Great job and thank you for your service! Keep wrenching man 🙌
💪💪💪
The dowel from the block looked like it was in the tranny still. Great content as always bro!
I've seen that a few times, fun to pull those out 😅
Great video, honestly better than most FSM's out there. Tanner, the other dowel is on the transmission.
I saw that after I put the camera down 😅 going tk have to yert it out of there when I get the new engine in
I like your Subaru Videos but seems like removing the engine with extra steps lol. Only thing I remove is the radiator starter and down pipe then pull the engine. But great detailed video.
I like to pull as much off before hand 😅🔥
Thanks for the advise on the ets non resonated exhaust im loving it. You video helped me decide to get it.
Eyyyy, glad it helped! 😁
Brixton! Let’s go! Their worn wash shirts are my absolute favorite
High key got one 😅🔥
You just made that look so damn easy I feel like I could go out and rip it out in an hour now 😅😅 giving me false confidence man 😂
Good knowledge and advice but personally been doing these for years and you don’t need to pull the manifold off to pull the engine it is unnecessary work and pulling the manifold doesn’t make it easier to pull the engine
Awesome work 👌 I'll be needing this one soon thanks Tanner great content as always
Anytime Tyler 🔥🤙
Not gonna lie, was tempted to try to find that same hat, and snag one for you. Can't lose a good hat.
I've looked for years and could never find another 😅
Used this to pull my 04 wrx engine, my cover for the clutch fork pin, was a 10mm Allen
Thank you for all you do for our community & fans of yours! I’m wondering how you would compare this type of manual trans EJ STi removal to a non turbo ej53 with auto trans from the same generation? I’m assuming the auto non turbo would be less parts and therefore less hassle, is that assumption correct? Any major differences in removal that you can think of by chance? Thanks again, your hard work never goes unnoticed!
Little more easier because no turbo components in the way but aside from that should be the exact same with the expecting of removing the torque convertor bolts 🙏🔥
17:51 - started my build on my 2017sti now is better than never lol
It is now! 🔥
Great video but can we get an engine install vid?! The subtleties and tricks would be awesome!
Yes I can film that when the time comes 🙏😁
Saved to Watch Later (again without distractions) and also saved in the learning category... Seriously like i started watching then a set of CX drawings come in and i turned around and youre Peace-out homies WHooo...
It'll be here for when it's needed 🙏 and always busy😉🔥
Possibly one of your best vids yet!!!
Might be the new hat and shave😅
Oh and having a car hoist is always pretty handy too!!!
Oh it definitely helps! 🙏
Pulling my motor on my 2.5i impreza soon starting tmrw!
You got this 🥳🥳🥳
@@Smeedia Thanks man love your content im sure i’ll be watching this vid 20 times over 😅
So I just did this job and I think we totally forgot to loosen the nuts on the transmission mount before jacking the transmission up 😅 is it absolutely necessary to do that? We were able to jack the transmission up a good amount even with the nuts secured on there but I wasn’t sure if that would cause problems on the mount itself by doing that. I haven’t had a chance to visually check the mount but is it even worth looking at?
I kept thinking to myself, this mechanic is speaking at an auctioneer’s rate. Maybe it is my 82 year-old ears. Hope I can follow it all and get my 2003 Subaru Forester engine out to make it easier to replace its head gaskets, get the heads skimmed by a machine shop, find oil leaks and adjust a noisy valve. Then hope I can put it all back together before the North Dakota winter sets-in.
Look at least 5 years younger without the beard mate 😆 🤣
It's like magic 😉
Thanks for the details man. It's still intimidating to a non wrencher but the plan is someday i'll feel comfortable enough to pull that sucker out.
The video will be here for ya when the time comes 🙏😁
The injectors must be in the TGVs? Sorry guys still kinda a rookie but always looking to learn!
Correct they are located in the TGVs 😁
Damn, you make that look so easy! I guess practice makes perfect
More you do it, the easier it gets 😅🙏
okay i know this is in a past video but i cant seem to find it, whats the best clutch master cylinder fluid to use for an 05 sti? great vid btw
OEM is what I alqays use, motul RBF is good too 🙌
How long did this take you from start to finish? I have been with Ford for the last almost 11 years and Subaru just hired me as a technician. I am a little nervous as I don't know these vehicles that well but this looks way nicer to work on than anything Ford makes.
Maybe an hour and a half or so, once you get the rythem down they're super easy cars to work on 🙏
@@Smeedia wow that's great to hear. I'm really excited to get started. Thanks for the video and comment 👍
Have a video coming out in about 20 min showing a reseal job too that might give you a little more insight 🥳
How to pull the engine out of an automatic transmission? Is it just brute force or do I have to pay attention to something, especially concerning the torque converter?
Hey just hit 110k miles on my WRX and all maintenance was done at 100k miles including walnut blast and 18 sti transmission swap anyways lately I've been noticing a faint smell of gas from the interior of the car and oil seeping from the front right coil pack. Is this an indicator of my motor going out or spark plug is loose?
Sounds like a valve cover seal is bad or leaking
Why remove so much while the engines still in the car?
I perfer to to remove as little as possible before removing the engine cuz it’s all so much easier when the engines on a stand. To each their own though.
IMO it's not much extra work or time to remove the extras, also clears more room to access the bellhousing a little more freely.
Very helpful video! Is it about the same for Tribeca 2014?
No beard?¿???
Who is this babyface man & what did you do with Tanner!? 😱😱😱
🤫🤫🤫
Quick question bro, it’s safe for an 05 STI engine to used fluorescent leak detection?! Mine is always have a quart low after 1500 miles. I want to used that and than remove the engine and used a UV light to see where engine oil is sipping or leaking. Thank you in advance!
Could you send me photos of where the ground wires go onto the engine from the body? The quick connect small ones.
Soooo quick question in a 2010 wrx with the 5 speed it doesnt seem to have the transmission slide pin im guessing the slave cylinder and clutch still have to be removed ? In the process of pulling it
Salve cylinder does not, you should be able to depress the slave and pull up on the clutch fork to release it
@@Smeediaperfect timing im gonna finish pulling it today thank you 🙏🏽
Low key. Hardest time I had with pulling my motor was oil return line clamp on the bottom of the turbo…. Absolutely worst area to work in my opinion. That press fit is in the worst spot 😂
Just yeet the turbo up after unbolting it and it will slide off 😅🙏
@@Smeedia LOL with my crusty old heat cycled oem rubber oil line. I think I tried doing that the first time and couldn't realize why it wasn't coming off. Do you know if that return line is under pressure anyway or just gravity? I was so determined to have the hose clamp seal that off well. #NoFireGang
Just gravity. Shouldn't be seeing pressure at all,
Dude, good walk through. I don’t even need to pull an engine but now I kinda want to just cause I watched your video and feel like I know how to 😂. I’m curious though, did you go through any sort of schooling for auto maintenance or are you self taught just by watching videos like you provide for us?
Just self taught over the years, made more than my fare share of mistakes but best way to learn IMO 😁
looking great man! thanks for this overview of how to get this sht done!
Thank you and anytime!
What sort of total labor time is involved when replacing a long block in one of these? Like a rebuilt long block
Depends on who's doing it tbh, idl what shop rates are but I can do it in a afternoon if I have all parts. I normally just do 1.2-1.5K for a straight swap. But heavily dependent on the car.
Some shops charge upwards of 5K
May need to pull the engine off my BRZ. I think the compression ring aint working anymore. I'm thinking of throwing an OEM short block assuming my heads are still good I'm at 70k miles, 10k of those were hks supercharged miles. Is that advisable? if so do i have to get the heads resurfaced to get a good seal with the new block?
Hi thank u for your help I'll be taking my engine out soon it blood a head gaskets
hey what happened to the other guy who ran this channel? He had a beard and an old hat?
He's gone 🤫
For now.... lol
Do you have a parts list for all of the parts you replaced?
Hi, will a 2018 subaru outback wagon non turbo have a cam carrier leak/drip at 34,000 miles on the car? they are charging me $3555.
Smeedia. I have a important question. What if I’m putting the motor back in and i got the bottom bracket bolts back in but when try putting the motor in and connect to trans it’s not going. I have the wholes and everything lined up but it’s like the clutch for is in place but belhousing won’t clamp together. What may be the problem. Is there a way I can instagram you that way I can send a picture on where I’m stuck at bro?
I’ve done this twice now lol Still will watch to see if there are any shortcuts
Always could learn something new 😉
What if you have a full tank of gas and your going to swap in a new motor , will all the fuel dump out through the lines or only a little bit Thts basically been sucked up by the pump ?
Just a little bit, you don't have to drain it 🙏
Whatever is in the line will spill out a little
@@Smeedia sweet thank you keep up the good work man your the only guy us Subaru brothers love to watch man
My 06 legacy gt 5 speed does not have the 14mm fastener to remove the slide pin for the clutch fork... what do I do?
You should do a video on how to manual swap a subi from a CVT
If the opportunity comes up I could 🙏
2010 Forester xt I can't find where the driver side ground wire goes.
The one in the engine harness that has the injector wires in it
Any ideas?
Hypothetically could I take the motor out of a wrx and throw it in my legacy? It’s has the fb 25 stock but can’t do shit to it it’s a auto tho
I have a question will a 06 Ej25 fit a 05 it looks all the same but I'm new to subuarus? Also wondering other year engine will interchange